Many women, having a typewriter at home, buy things in the store simply because they do not know how to independently develop this or that model. - a very capacious and long process, but if you get into it, everything is much simpler than it seems.
- BY measure the waist circumference and write down half the number;
- PB measure the circumference of the hips at the most protruding parts, and write down half the figure;
- WB measure vertically, along the side line, from the waist to the hips, write down the full number;
- Sun remove vertically, along the side line, from the hip line to the line of the subgluteal fold; very carefully determine the line under the buttocks, write down the full number;
- DI shoot vertically, along the side line, from the waist to the floor, write down the full number;
- Dz measure vertically, from the spine to the floor, write down the full number;
- dp measure vertically, from the navel to the floor, write down the full number;
- Dk remove vertically, along the side line, from hip to knee, write down the full number;
- Shn Measure and write down the width of the bottom of the finished trouser leg, the full number. To do this, wrap your ankle around your ankle with a measuring tape.
Step by step process
As they say, “The main thing is that the suit fits” Therefore, we take measurements very carefully.
- We will need paper to have 0.5 cm squares marked on it for convenience, or any other paper that will accommodate the full length and width of the product, a pencil and an eraser to make it easier to correct drawing errors.
- We transfer the measurements onto this paper so that they are before your eyes and in case you want to save the pattern.
- We also write down seam allowances on paper; they are needed so that the finished product does not become smaller in size: PT (for the waist) 0.5 cm. PB (for hips) 1-2cm
- Now we move directly to constructing the pattern drawing. We start with the front half of the trousers. Let's denote the vertex T and draw a right angle.
- From point T we measure VB, denoted by the letter B, then from the same point BC, denoted by the letter I, then measure DK, denoted by the letter K, then DI, denoted by the letter N. After which we draw horizontal arbitrary lines from each letter.
- Determine the width of the front half along the hip line. Calculation formula 0.5(PB+PB). We measure the resulting result horizontally from point B and mark B1. From point B1 we draw a perpendicular line up to the line from point T, mark the intersection as T1 and down to the line from point Y, mark the intersection as Y1.
- Next we need to designate the axis. The calculation formula for the center line is (0.15+PB+1.5)+0.25PB. From point B1 we measure the resulting figure to the left, denoting the intersection as B0. We draw a perpendicular through B0 to the waist line to the bottom of the product. Let us note the intersections of T0, R0, K0, H0.
- Just measure the segment and BB0 and move it to the right, mark it as B2.
- Now let's draw our trouser leg. Add 0.5 cm to the width of the bottom of the trouser leg and what you get should be marked on both sides of H0 with the letters H1 and H2.
- Let's give shape to our trousers. We draw a thick line H1B. We have formed point K1.
- Just measure the segment and K1K0 and move it to the right, mark K2.
- Visualize the middle of the trousers. We connect B2K2N2. You should get an uneven straight line that needs to be rounded to the left between the hip and knee B2K2. In simple words, we draw out the front crotch of the trouser leg.
- To ensure that the belt of the finished product sits in its place, we do the following. Down from point T1, measure the difference between the length of the product on the side and on the front, set T10. In this way, we raised the waist along the butt so that when sitting, the belt would not fall below the tailbone.
- We have outlined the middle between the thighs, now we move on to the upper part. Place point T11 0.5 cm to the left of T10, divide angle Y1 in half with a 3 cm segment. Mark 1. Draw a line first TT11, then T11B1, then connect B1,1,Y2 with a smooth concave line. And we get a clear waist.
- The next thing to do is to mark the darts, they will help to fit the waist according to the figure. Formula T2T11-0.5(PT+PT)-0.5, put aside half the result from T0 to the right and left, put two bold dots. Then we go down from T11 by 8cm for a protruding belly, 13cm for a flat belly. Draw a checkmark by connecting the resulting points.
- For a perfect fit of the trousers, adjust the hem line. From point H0, measure upward 0.5-0.7 cm and draw a concave line.
The bulk of the work is done. You can relax a little and drink tea and cookies, but we don’t stay long, because the back half is ahead.
Pattern of the back half
In order not to rebuild the drawing, we work on the basis of the front half.
To make it clearer, we make adjustments for the back half with a pencil of a different color.
- First you need to determine the main width of the rear half (Шзп), which is equal to (ПБ+Пб) -BB1. We do the calculations and write down the result. Next, we calculate the step width zp Шшзп = 0.4(Пб+Пб)-1cm, from the obtained result it is necessary to subtract B1B2, calculate it, write it down. To increase the back center along the crotch, sum up Shz and Shshzp, divide by 2 and add 0.5 cm. Now we extend to the right from B2 to the result obtained, this is point B4.
- From the received B4 to the left we measure Shshzp, which was calculated earlier. We got B3, from which we draw a line up to the waist line (which was drawn at the very beginning from point T). At the intersection point T3. From this point to the left 3cm we place T31. We connect T31B3YA1, slightly extending the segment up and down. Along this line you need to set aside the next value of 0.05PB, subtract 0.5-1cm for voluminous trousers. We put B31.
- Let's determine the waist line of the back half. We measure the segment B1T11 along the front and sum it up with the value Dz-Dp. From B31 we measure the resulting result along the middle line, denoting T32.
- We draw a new line B31B, extending it to the left, and measure Shzp on it, this is B5. Then from T32 along the waist line we measure the same thing and put point T4.
- So that our trousers smoothly flow around our figure, we build a dart. We move the distance TT2 to the right from T4, put T41 and connect it to B5.
- To form the waist we connect T41 and T32.
- Its location is 0.4B5B31. From T32 to the right we measure what we got and mark T5. On both sides we mark half of the solution and lower the line down, from 8-13 cm, draw a tick. Let's calculate the solution for the back dart T41T32-0.5(PT+PT)-0.5.
- We go down to knee level. From K1 to the right, from K2 to the left we build points K3K4. For medium legs we measure 2cm, for narrow legs 2.5cm, for straight legs 1.5cm.
- We go down to the bottom line of the trouser leg, on both sides we measure 0.5 cm for moderate trouser legs, 1 cm for narrow trouser legs, 0 cm for wide trouser legs.
- We connect B5K3N3 into one line. Having done the same on the reverse side, we got Ya41, we go down from Ya41 by 0.5-1 cm. From Ya41 we draw a straight line until it intersects the middle line of the back part, mark Ya3. Divide the resulting angle in half with a 3 cm segment. Smoothly connect it with a concave line B31, 2, Y41.
- For a perfect fit of the trousers, adjust the hem line. From point H0, measure down 0.5-0.7 cm and draw a concave line.
Now we have come to the end of the drawing. At first glance, this is a very difficult job, but in fact it is simply labor-intensive and requires attention. Update your wardrobe and surprise others with your skills.
Pants for plus size women are an integral part of the wardrobe of every curvy woman. Today, many girls choose various models of such clothing because it allows them to look more stylish and attractive. To create a harmonious look, it is very important to choose the right style of trousers and learn how to combine them with other clothes.
Popular trouser models for obese women
Fashion designers offer girls a variety of styles of such clothes. Thanks to this, every fashionista will be able to choose the best option that will make her figure more attractive.
Classic
Traditional trouser models can be used to create laconic office looks. Perfectly suited for those with full legs. Pants with arrows hide excess volume and make you look much slimmer.
Pilots
This is a great clothing option for warmer weather. These trousers are made from natural soft material, so they can be used for every day. This clothing does not cause discomfort even in the hottest weather.
With the help of such trousers you can easily hide all the imperfections of your figure. Therefore, such models are perfect for owners of curvy figures.
Sultans
These trousers look incredibly feminine and romantic. In essence, they are lightweight, loose-fitting pants. There are elastic bands at the bottom of these clothes. Such models allow you to add light oriental notes to the composition.
Banana pants
Such models can confidently be called one of the most popular. They look very stylish and are perfect for owners of all body types. The model is slightly loose at the hips and tapers towards the bottom. The trousers end slightly above the ankles.
Such products are a trendy trend and are present in almost all designer collections. Thanks to such trousers, you will be able to make your figure more feminine and give it lightness.
Tapered
Such models are considered a very controversial item of clothing. Many stylists claim that tapered trousers make you look quite fat and emphasize all the flaws. However, there are models that owners of curvaceous figures can easily afford.
To look harmonious, you definitely need to choose the right top. If you pair tapered trousers with a long cardigan or tunic, you can make voluminous hips less noticeable.
Wide
Such models can be straight or flared. Wide trousers are ideal for overweight girls. They fit perfectly and help create a clean and sophisticated silhouette.
Shortened
Such trousers are a real trend today. Cropped models go well with shoes with a beautiful platform or high heels. To achieve the desired effect, regular trousers can be rolled up a little.
Capri pants
This is a more radical solution. They are very popular among plus-size fashionistas. However, stylists assure that such models are suitable only for tall girls. Otherwise, there is a risk of getting a rather heavy image and visually reducing your height.
Pants 7/8
Such products help to visually make your legs longer. Thanks to such models, it is possible to slightly increase height. Full-bodied fashionistas will want products that taper slightly at the bottom, but do not hug their legs.
Ankle length
A very stylish option are models that open the ankle. Such products go well with shoes or sandals, which are complemented by a strap around the ankle. This will make you look more impressive. Flat shoes are also acceptable, but they will not look as organic.
Evening
Festive trousers are the ideal solution for special occasions. The right style and material will help you get a spectacular look and hide figure imperfections.
Evening trousers that combine several textures at the same time look especially stylish. Such products are usually complemented with bright prints, lace, and accessories. Thanks to this, every fashionista can emphasize her individuality.
Chinos
These are tapered trousers that look very stylish and fashionable. Fashion designers advise owners of curvaceous figures to combine a neutral shade with a bright top. This will help draw attention away from your full thighs.
Today, models with high and low rise are relevant. In any case, such products look quite stylish. Many girls prefer to roll up their trousers, which allows for a more casual composition.
Skirt-pants
This is a universal solution for all body types. Looks especially stylish on girls with curvy figures. Stylists claim that such products easily hide figure flaws and focus on advantages.
Fashion collections present quite a lot of current options for such clothing. So, you can afford a stylish monochromatic model or choose an original product decorated with ornaments.
Culottes
Another ultra-fashionable trend. They have a loose fit and fairly wide legs.
Such models are quite acceptable for those with curvy figures. They help hide full hips and feel more confident.
Attention! To look attractive, you should choose a stylish model made from light fabrics. Such products flow smoothly over the body, hiding figure imperfections. In this case, it is best to give preference to universal dark trousers.
With elastic band
Elastic trousers come in a variety of styles. The unifying element is a special belt. These models are ideal for plus size girls as they provide amazing comfort. It is very important to choose the right size for such clothing. Thanks to this, it will not squeeze the body, forming folds on it.
Current materials
Today, famous designers offer girls a variety of trouser options, which allows every fashionista to choose the optimal solution depending on the purpose and time of year.
Knitted
These trousers are ideal for those with curvy figures. Knitted models fit perfectly on the figure. Thanks to this material, you can give the body more beautiful and correct proportions.
Summer chiffon
This is a very light and airy material that is used to make summer trouser models. Such products have a flowing texture and help hide heavy shapes. Thanks to such trousers, you can make your figure more feminine and graceful.
Denim
This is the best option for obese women, which literally transforms her appearance.
It is best to give preference to stretch jeans that have a high waistline.
Attention! It is worth considering that denim is a fairly thick material, and therefore can add volume to the hips and buttocks. Therefore, you should give preference to lighter products.
Velor
Such models are considered an ultra-fashionable trend. The fabric has a fleecy texture, and therefore there is a risk that the figure will appear more voluminous. At the same time, the right choice of color and material will help make the bow more attractive.
Stretch
Stretch trousers are made of cotton with Lycra or elastane. Due to the presence of artificial fibers in the composition, it is possible to achieve an excellent effect. These models fit perfectly on a full figure. With the right choice of style and color, it will be possible to hide fullness, make the silhouette more sophisticated and hide skin unevenness.
Linen
Such models are perfect for summer and off-season. Linen trousers have a fairly dense texture and are highly breathable. Therefore, they can be worn in both warm and fairly cool weather.
Leather
The choice of such models must be treated very carefully. Leather trousers are suitable for those with ideal shapes. Overweight women need to choose the right style and size of such clothing. In addition, you should definitely pay attention to the choice of additions to it.
Fashionable colors and prints
To look attractive, it is very important to pay attention to the choice of color scheme of the product. Today, fashion designers offer girls many options.
White
Such trousers may well become part of the wardrobe of a complete fashionista. However, stylists do not recommend combining such clothes with a black top. This contrast will make the lower part of the figure look fuller.
Reds
Girls who do not want to wear banal black trousers can purchase wine or burgundy models. Thanks to these options, you can add a touch of elegance to your look. With the help of such clothes you will be able to create unique business and elegant ensembles.
Colored
In the wardrobe of a plump girl there may well be quite bright items. At the same time, stylists do not advise giving preference to light colors. Lilac or mint styles can make your legs look fuller. Products in a dark blue or rich purple hue will look much better.
Flowered
Such products are perfect for romantic girls. To look attractive, you need to pay attention to the size of the print. A large floral pattern is ideal for plus-size fashionistas.
With stripes
Vertical stripes on the sides will help make your figure slimmer. Pants with stripes are ideal for overweight women. Such products will help you create stylish looks in a sporty style.
Who are they suitable for?
Each figure has certain characteristics. That’s why it’s so important to choose the right style of trousers depending on your body type:
- Girls with narrow shoulders, thin waists and full hips should pay attention to trousers that have a fairly wide waistband. They can have a straight or slightly flared cut and fit snugly around the hips. Thanks to such models, it will be possible to make the figure more proportional.
- Tall fashionistas can easily afford fairly wide trousers. At the same time, it is important to ensure that they do not have a large number of decorative elements - patch pockets or embroidery. Such details will make the figure look heavier.
- For those with broad shoulders and narrow hips, any style of trouser will suit you. Products with a low waistline will visually expand the hips, straight ones will help to emphasize the waistline, flared ones will emphasize the legs. In this case, you can even wear shortened models.
- Girls with a full, featureless waist should pay attention to straight, high-waisted trousers. Thanks to such products, you can hide your bulging belly. To make your silhouette slimmer, you should choose trousers with arrows.
- Straight models are suitable for girls with a pronounced waist, full bust, broad shoulders and hips. Tapered trousers in this case will not look very attractive. To complete the look, you should complement the trousers with a belt of the same color. This detail will emphasize the waistline.
- The front half of the trousers – 2 parts.
- Back half of trousers - 2 parts
- Belt of the front half of the trousers - 2 parts with a fold
- Belt of the back half of the trousers - 2 parts with a fold
Zipper in this model it is sewn into the left side seam.
Sewing trousers
- Stitch all open cuts. Strengthen the belt with adhesive interlining.
- Place the folds on the front halves of the trousers according to the marks, secure with several temporary stitches or simply secure with a pin.
- Sew darts on the back halves of the trousers. Iron to the middle cut.
- Stitch the side seams, stitch the left side to the mark, leaving an open area for the zipper. Iron.
- If you are sewing a classic version of trousers, then in this place, in my opinion, it is necessary to carry out a wet-heat treatment (pull out the step sections of the back halves, form arrows, etc.). It is possible to perform WTO even before grinding the side cuts.
- Stitch the step cuts. Iron.
- Stitch the middle sections. Iron the area approximately 10-15 cm from the top cut, do not iron the rest of the seam!
- Sew along the top edges of the front waistband pieces. Iron the allowances to the side of the inner belt, stitch along the inner part of the belt 1-2 mm from the stitching seam. Fold the waistband inside out along the seam of the top edge and iron.
- We do the same with the back belt. Sew along the top edges of the back waistband pieces. Iron the allowances to the side of the inner belt, stitch along the inner part of the belt 1-2 mm from the stitching seam. Fold the waistband along the stitching seam with the wrong side inward and iron.
- Sew the right side sections of the waistband and press the seams.
- Sew the belt to the main parts of the trousers (the outer part of the belt is sewn in), iron the allowances onto the belt.
- Finish the fastener in the left side seam.
- Overcast the open sections (bottom) of the inside of the waistband.
- Fold the side sections of the waistband and sew them by hand to the zipper tape.
- All that remains is to fasten the inner longitudinal section into the seam of the belt.
- Hem the bottom and trousers are ready. That's it in a nutshell. More detailed information on processing trousers can be found in specialized literature.
Girls with curvy figures sometimes believe that with their non-standard figure they cannot afford to wear fashionable trousers. In fact, this is far from the case.
The modern fashion industry creates wonderful models for plus-size women, which in their style and originality are in no way inferior to products created for standard body types.
Styles and models of plus size trousers
Pants that are tapered to the bottom look very good on full legs. Due to their style, they correct your silhouette, visually narrowing your hips and making them more proportional to your calves. The color of such trousers should be selected depending on the season - for the cold season, black, dark blue or brown colors are suitable, and in spring and summer, give preference to rich shades, for example, raspberry, light green or sky blue.
Wide trousers are perfect for those ladies whose problem areas on the body are wide ankles. Moreover, the reason for their appearance may be associated not only with excess weight, but, for example, with swelling of the legs. The width of the trousers will perfectly hide these unsightly places and allow you to create the image of a slim and healthy woman.
The cropped trouser model, better known as capri pants, is very popular among plus size fashion designers. She is able to correct a very overweight female figure, making it more sophisticated. It is important to choose the right bottom part of the ensemble: a plain top or a blouse in a neutral shade will make the look very harmonious and stylish.
When choosing trousers for the winter, special attention should be paid to the selection of fabric. Dense and voluminous ones will only visually increase the silhouette, so the choice should be made on warm, but rather thin materials. Thin wool and denim are perfect. These fabrics, despite their small thickness, provide excellent warmth, fit well into any look and do not electrify, which is very important in winter when wearing a large number of different materials at the same time.
Turkish trousers, or "harem trousers", are a very popular model. But, unfortunately, girls with non-standard volumes are not recommended to wear them. Since wide trouser legs and elastic bands along the bottom create additional volume, excess fullness will stand out much more clearly and will only make the silhouette even larger.
Pants that barely reach the knees are very popular in the summer. They are not hot, they allow you to move freely and fit perfectly into the juiciest and most summer looks. If you choose the right color and print applied to them, you can very successfully adjust the voluminous silhouette, giving it the correct proportions.
Boho-style trousers, featuring a loose fit and various decorative elements, with the right approach can be turned into the main weapon of seduction in the wardrobe of a slightly overweight girl. The use of elements such as flares, patch and mortise pockets, “curtains” at the waist and lower part of the legs can be successfully used in correcting your figure.
Pockets located just below the knees will help balance the silhouette. Voluminous hips will not be so conspicuous, and the waist will become a little thinner. The use of large jewelry in an image can “draw” attention to itself, because it will be the brightest, and, most importantly, the largest detail of the image.
Despite the fact that sweatpants are supposed to fit tightly on the buttocks, they look great on plus-size girls. This is achieved through the use of special fabric in their tailoring, which visually corrects the silhouette. In addition, in some models the material promotes weight loss due to a special micro-massage provided by the texture of the fabric.
All girls, despite their height, weight and other body proportions, want to look great on the beach. Special dresses, suits and trousers have been created for this purpose. Most often, these items are sewn from natural fabric, which has a light and floaty texture.
In order to hide a voluminous belly, high-waisted trousers are perfect. Moreover, the greater the number of extra pounds, the denser the fabric should be. For minor and unnoticeable deviations from the norm, you can wear trousers made of elastic jersey, as well as stylish skinny jeans made of classic denim.
Culottes, which are gaining popularity, are, in principle, not recommended for wearing by overweight women, since the voluminous shape and shortened style only add extra centimeters. But by successfully combining the length, color and texture of the fabric, you can achieve amazing results.
Sultan pants look very interesting and unusual. This model comes to us from the Middle East and is very popular among Arab women. Since their style suggests a loose and flowing silhouette, they hide excess volume on the legs and hips. Often these trousers feature a floral print. When choosing a full figure, it should be taken into account that large flowers will visually significantly increase the volume of the body, so you should choose a pattern with small buds.
Fabric selection
Knitted trousers– an excellent choice for a fuller figure, as due to its excellent fit, this fabric can be used to give the body more correct proportions.
Chiffon– a very light and airy fabric from which you can sew wonderful summer trousers. The flowing texture can hide the weight of a large figure, giving the image a special sophistication and femininity.
Jeans are a real find for obese women, as they can significantly transform their appearance. Among the variety of models, it is worth paying attention to stretch jeans with a high waist. Be sure to keep in mind that thickened denim, due to its thickness, will make your hips and buttocks more voluminous, so try to purchase models made from lightweight denim.
Velor trousers- This is one of the most popular trends of the coming season. Despite the fact that the fleecy texture of such material can emphasize volumes on the body and make excessive fullness more noticeable, with the right selection of style and color, such trousers can easily be worn by girls with a “skinny” body. If the fabric is thinner, then you can easily wear velor trousers, which always look luxurious and extremely elegant.
Stretch trousers Made from cotton fabric with the addition of elastane or lycra, they fit perfectly on a full figure. Such a model should be selected based on the amount of excess weight - the more it is, the greater the degree of elasticity the trousers should have. With the right choice of size and style, they perfectly hide excess fullness, visually tightening the silhouette and smoothing out all the unevenness on the skin of the thighs and buttocks.
Choosing trousers by season
To stay warm and look stylish in the cold winter, you need to be very careful when choosing trousers. Overweight girls should avoid models made of thickened fabric or with an additional insulating layer.
An alternative to them can be trousers made of warm but thin fabric - for example, natural wool. Also, the best option would be to wear thermal underwear - it warms you up and is completely invisible under your clothes.
Trousers made of fairly dense, but natural fabrics are comfortable to wear during the transitional season. In spring and autumn the weather is often unpredictable, so clothes may be lighter than winter ones, but in case of bad weather or frost they should be warm.
Trousers made of cotton and linen perfectly meet these requirements; moreover, a wide range of demi-season models of various shades are created from these materials. In spring, this is especially true, as you want to take off your boring winter clothes and put on blooming and sunny clothes.
Summer is the time for bold colors and interesting styles. Plus-size girls can fully afford a stylish wardrobe. This is especially true for different models of trousers. Voluminous camisoles or tight-fitting leggings, wide flares or tapered bananas - among such a variety you can easily choose a style that suits your body type and clothing style. Among fabrics, preference should be given to airy chiffon and light natural fabrics - silk, cambric or cotton.
Elegant models
For festive events and special occasions, trousers are perhaps the best option for girls with “skinny” looks. Skillfully playing with fabric texture and style, the creators of collections for plus-size women achieved results of incredible beauty.
The combination of different textures looks very original, and the use of asymmetrical cut in the models makes the images unique. The use of bright prints, lace trim and various accessories expands the line of elegant trouser models for plus-size women, making each of them different from the others and satisfying the needs of the most discerning fashionistas.
Popular colors and prints
Among all the variety of colors in the wardrobe of overweight girls, of course, there should be black trousers. This classic tone in any style will visually reduce volume and make your silhouette slimmer.
Light-colored trousers need to be selected carefully - it is better to choose neutral shades, such as beige, light brown, gray-yellow. They are not conspicuous, but at the same time allow you to create a gentle and elegant look.
Pants in bright colors should only be worn in styles that hide the fullness of the body - between straight pants and skinny pants, preference should be given to the first option. White models must be strictly cold in color.
Prints on trousers can be very diverse - flower, polka dot, stripe, etc. When choosing a pattern, you need to pay attention to its size - overweight girls are not allowed to wear trousers with a large print, as it will significantly increase your look. Choose a small and flowing print - things strewn with small peas or flowers look great on a large figure.
Fashionable women's trousers
Fashion trends of recent seasons have not bypassed trouser models for plus size girls, transforming them somewhat and making them even more stylish.
The principles of constructing a trouser pattern for obese women are somewhat different from constructing the main trouser pattern.
Let me remind you of the basic measurements necessary for this construction:
1. Pants length, trouser length to the knee (Dbr, Dbrk). Measured from the waist line along the side to the desired point.
2. Thigh circumference (thigh O). The tape wraps strictly horizontally around the thigh, touching the upper edge of the subgluteal fold, and closes on its outer side.
3. Seat height (Sun). The person whose figure is being measured must sit on a chair with a flat, hard seat. Measure along the side from the waist line to the seat of the chair.
4. Seat length (Ds). The tape runs from the front waistline through the groin to the back waistline.
5. Step length (Lsh). Measured along the inner surface of the thigh from the groin to the floor with the legs slightly apart.
6. Knee circumference (Approx). Measured with the leg bent at an angle of 90° at the level of the knee point.
7. Height of the subgluteal fold (Hv). Measured from the middle of the subgluteal fold to the floor vertically.
Constructing a pattern for the front half of trousers for overweight people.
Let's draw a vertical line on which we plot:
1-2 = 1-1.5 cm;
1-3 = seat height;
3-4 = knee height;
1-5 = pants length (from waist to side floor);
5-6 = lengthen or shorten depending on desired length. Remember that the length of the trousers and the width of the trousers at the bottom depend on each other. Let's not forget to take into account the height of the heel;
3-7 = 1/10 of the half-circumference of the hips + 3 cm - draw the line of the hips.
Draw horizontal lines through points 2, 3, 4 and 7.
7-8 = front half width;
8-9 = 1/10 half hip circumference + 1-1.5 cm.
From point 8 we draw a perpendicular to the hip line, at the points of intersection with the seat height line and the waist line we place points 8a and 10;
7-11 = 11-9;
7-11 = 6-12.
From 12 we will draw a line through point 11, at the points of intersection with the line of the knee and waist we will place points 13 and 14.
From 12 to the left and to the right, set aside 1/4 of the width of the trousers at the bottom minus 1 cm.
From points 15 and 16, set aside 4-8 cm perpendicularly upward and mark points 15a and 16a.
Let's connect points 7 and 15a, 9 and 16a. Let's mark points 3a, 17, 18, 19.
From point 8 to the right we will set aside 0.5 cm.
We will move half of the segment 8a-17 from point 8a upward, obtaining point 8b, which we will connect to 17.
Let's draw a line for the middle cut as was done in the pattern diagram for the front half of the trousers.
From point 10 we will set aside 1/4 of the waist circumference plus the increase for darts and loose fit (1.5 cm + 0-0.5 cm), put point 21, from which we will set aside 1-1.5 cm upwards at right angles to the waist line and put point 22 (21-22 = 1-2).
Along the knee line from the edges, we will put 1 cm inward - we will put points 23 and 24, after which we will draw the lines of the side and step cuts.
Let's build a dart with a depth of 10 cm and a gap of 1.5 cm, after which we will finish constructing the waist line.
Constructing a pattern for the back half of trousers for overweight people.
To build the back half, copy the front half of the pattern and make changes.
Let's shift the line of the back fold of the trousers, setting aside 1-2 cm from point 11.
From point 25 we will set aside 1/4 of the width of the back half - 0.5 cm. We will get point 27 by setting aside 3-5 cm from point 3a. We will connect 27 to 26.
Let's expand the lines of the hips and waist.
Let's set aside the width of the back half from point 28 to the intersection with the hip line. 25-29 = 25-30.
Let's draw a line for the side and step cuts at a distance of 2 cm from the corresponding cuts of the front half. Let's put points 31, 32, 33, 33a, 34, 34a.
Let's draw a line from point 32 through point 29 to the waist line, where we'll put point 35. 30 will be connected to 31. 13-36 = 13-35 minus 0-1 cm. 35 will be connected to 36, from which we will set aside 0.5-1 cm to the left and put point 37.
From point 37, set aside 1/4 of the waist circumference plus the tuck opening (3-4 cm) plus the increase for a loose fit (0.5 cm) and put point 38.
Let's move the side cut line of the front half to the side cut line of the back half.
Let's build a dart 13-15 cm long. Finish the waist line and the line of the middle cut of the back half of the trouser pattern for plus size ones.
TA-dah! The trouser pattern for obese women has been completed!
Always be fashionable, stylish, beautiful and confident!
