I will sew online, that is, together with everyone, taking my time, gradually laying out the sewing process, and answering questions along the way. I will post each stage in a new post, leaving links to previous and subsequent stages. Girls, you can do the same on your blog (magazine, topic, or just in my comments), post your steps with explanations or questions, clarifications, etc.
I warn you that there will be a lot of writings and photos. That’s why, most likely, I leaned towards step-by-step sewing rather than immediately ready-made volumetric MK. I don’t promise to photograph everything beautifully and colorfully, but I’ll try to make it clear and not completely dirty and blurry)))))
In general, I will sew a jumpsuit in the image and likeness of this one for my Ksyusha. I’m not sure about the fur yet, but if there are a lot of people who want to attach the fur, I’ll show you.
There are few details in it. Quite a simple model. There will be no inserts or decor. All from the same printed fabric. I have this jacket fabric with a membrane coating with the image of rainbow zyobers))))
The lining will be fleece and omnikhite. You can take a regular lining, or you can make one lining for the entire height. But full-length fleece will not be very comfortable, I think. That's why I only put it on the front and back up to the butt. Below will be the Slidsky Omnihit, and it will also be in the sleeves. There will be fleece on the collar and hood. I took the TricotBrush, which I had previously put in my other overalls, but it’s out of stock, unfortunately.
And so, my list necessary materials for insulated overalls size 98-104.
Raincoat - 1.5m
fleece - 0.5m
omnihit (lining) - approximately 1m
insulation (I have Alpolux 200 for winter) - approximately 1m
zippers:
- main - 1 PC
- on the pockets - 2 pcs
- on the fastened hood - 1 PC
wide elastic band 3cm for cuffs - 80cm is enough
decorative elastic band for straps - approximately 1m
hat elastic for tightening - approximately 1m
Velcro
threads
fasteners for drawstring - I have found two things that match the color so far, maybe I’ll take others and make a drawstring on the hood, I don’t know yet...
In my photo I also have an additional gray raincoat fabric for the pocket and frames. Perhaps it won’t be needed, it’s just that the pattern of my main fabric is directed, you can’t turn it anyhow, in case it’s not enough, so I played it safe. But it should be enough for the main details.
I take the pattern from Ottobre magazine 2014-4, model 14. For my daughter’s height of 94 cm, I take the size of this pattern 104. As the practice of sewing this pattern has shown, for winter insulation it is good to take a size one larger than the child’s own. That is, Ksyusha’s native size is 98, one more - 104. This is quite enough, the pattern is good, in my opinion, the width is sufficient.
The changes I make to it are very minor: for reserve for growth, and in general for some convenience I increase the length of the legs and sleeves by 4cm! How larger size, the greater the increase. Well, you also need to look at what is planned for the legs and sleeves. I have cuffs, my formula is +4cm. The growth margin turns out to be exactly 10 centimeters. That is, a child with a height of 92 to 102 cm can fit well in this size.
I make the collar 1.5 cm higher. I measured this clearly today. Before that I somehow added it by eye))
Well I'm converting the hood into a two-seam one. This is my personal preference. Not necessary.
I don’t touch the armhole, sleeves or neckline. But perhaps someone will need to lower the armhole a little and widen the sleeve. Girls, look at your children. These narrow sleeves suit me quite well. And, unfortunately, I can’t tell you how to change the armhole...
It's getting colder outside every day. It's time to warm up. Today I want to show you how to sew a children's jumpsuit with your own hands. I sewed this jumpsuit from a ready-made coupon that already had the pattern in the right size printed on it. I ordered the fabric with the pattern from the store. “Bobbin” (patterns on fabric with your prints). Sublimation printing of a design on fabric (I have fleece, you can choose a different fabric). My daughter chose the drawing herself.
This is what the pattern looks like on the fabric, seam allowances have already been taken into account (1 cm). The marks are also marked on the fabric. Instead of a collar, you can order a hood.
We cut out all the details of the pattern: 2 back pieces, 2 front pieces, 2 sleeve pieces, a collar and 4 cuff pieces. It is better to sew cuffs from ribana or cash corse. I decided to make the collar from the main fabric, that is, from fleece.
We sew both parts of the back from the wrong side, as shown in the photo below.
We connect the front and back pieces at the shoulder seams.
We straighten the front and back and sew the sleeve into the armhole, aligning the marks.
Fold the overalls along the shoulder seams and stitch them on the wrong side side seams, including sleeves and trouser legs (where marked with a dotted line).
Then we sew one side of the collar piece to the neck, connecting the marks.
Clips for fixing fabric are possible.
Let's start with the lightning. For a size of 128-134 cm, zipper length = 60 cm. Bend the collar in half and insert a zipper between the layers of fabric.
We sew and stitch one of the two sides of the zipper along the entire length.
Before basting the second part of the zipper, it is better to make a protective strip for the zipper. Since I made the cuffs from cashcorse, the details of the fleece cuffs remained on the coupon. From one piece I made 2 pieces in the form of a semicircle measuring about 5x8 cm.
We place these parts on top of each other with their right sides inward and stitch them where marked with a dotted line.
We turn this part right side out and sew it to the second part of the zipper in the appropriate place. Moreover, most of the protective strip will be on the wrong side of the zipper.
Then we sweep away the second part of the zipper, also bending the collar in half.
Turn and align the corners of the collar. We fasten the zipper and check that everything is smooth. If everything is smooth, then we grind (sew in) the zipper.
We bend the second edge of the collar and sew it by hand with a blind seam.
You can sew a straight stitch on the right side of the seam next to the collar.
Fasten the zipper and secure it with a seam at the bottom. Cut off the excess length of the zipper.
On the front side we lay a straight line along the entire length of the zipper, where it is marked with a dotted line.
Sew the crotch seam.
All that remains is to sew in the cuffs. We bend the cuff parts and sew them into a ring with the smaller sides.
Bend the cuffs in a circle so that the seams remain inside.
Insert the cuff as shown in the photo below and stitch in a circle.
The fleece overalls for my daughter are ready.
Veronica is 7 years old, height 127 cm. I took the overalls pattern for a height of 134 cm - the size fit perfectly.
For every child, the beginning of winter is joy and a time of new impressions! After all winter time- time for fun snowball fights and sledding and ice skating. And for children to feel good outside, they need comfortable, functional clothing that protects from the cold wind and does not restrict movement - overalls. You can buy a warm overall for the winter for your child in a store or sew it yourself.
The fabric for the overalls should be thick, preferably impregnated, to prevent moisture from entering. And for the lining you can use padding polyester or sheep wool. In such a onesie, the baby will never freeze.
Below is a sample pattern for a children's winter overalls. This overalls are sewn with insulation and will not let your child freeze. This universal clothing Suitable for both boys and girls. It is convenient and comfortable to walk in winter overalls even for several hours, and that is why many parents prefer this particular clothing.
This product has a straight silhouette and a stand-up collar. It is optimally voluminous and does not restrict the baby’s movements. There is a zipper fastener on the front of the product. At the bottom, the pants and sleeves are pulled together with elasticated cuffs. The belt, also with an elastic band, is put on top of the latch buckle. If desired, you can add a hood to the overalls, which can be detachable or sewn into the neck.
We build the pattern according to the measurements taken, namely, you need to measure: the circumference of your baby’s waist, hips, chest, neck, the length of the arms, legs and back, the circumference of the wrists and ankles. You can also take an old overall that is too small for your child as a basis and add a few centimeters to take into account the growth.
Before you start cutting, you need to check the pattern again. Take a measuring tape and compare the dimensions of the drawing with the measurements you took. The pattern is provided without additional seam allowances. That is why, when transferring the pattern onto fabric, leave 1-1.5 centimeters for allowances.
The insulation and lining are cut out according to basic patterns. Then they are stitched from the wrong side. Sew the cuffs to the sleeves, then insert the elastic into the cuffs. Now the sleeve will fit tightly around the baby’s hand and cold air will not penetrate inside.
Next, sew on the stand-up collar or hood. Lastly, we take care of the zipper. We carefully sew it in! All that remains is to decorate the jumpsuit. you can use various accessories, iron-on stickers, embroidery or even applique. A baby's overalls should be bright and stylish, because kids really like beautiful things. The hood can be trimmed with fur.
This is how you can quite simply sew a winter overall for a child with your own hands. We wish you creative inspiration and successful results!
Hello, Zimushka-winter!
For children, the new arrival of winter means new fun, new experiences! The quality of these childhood experiences is directly proportional to parental responsibility. In order for a child to have a successful walk, first of all, he needs appropriate clothing. The most suitable option for winter games snowball fights, sledding or skiing - this, of course, overalls.
Overalls will reliably protect the child from the winter cold, provide comfort and freedom of movement.
We offer you pattern, according to which you can sew a jumpsuit like for girl, so and for boy.
Ready-made pattern for children's winter overalls
Height 110cm
Bust circumference 56cm.
Children's winter overalls with insulation, straight silhouette, optimally voluminous, zipper in the middle of the front, stand collar. The sleeves and legs at the bottom are gathered with elastic or cuffs. The belt is worn over the overalls with a latch buckle. There is an elastic band inside the waistband. The overalls can be complemented with a hood. Hood pattern for this size is available in . The hood can be made detachable or sewn into the neckline.
Preparing the pattern for work is extremely simple.
Click on the diagram located at the end of the article and baby overalls pattern opens in a new window.
Print out the pattern sheets, cut and connect them according to the diagram.
Be sure to check the scale for consistency. On a printed sheet with a 10x10 cm square depicted, sides of 10 cm should correspond to exactly 10 centimeters.
This pattern can serve as finished pattern, and can be used as modeling basis. You can apply additional relief lines, add yokes, pockets, knee pads, etc.
The figure conventionally shows finishing trims on the sleeves and on the legs. You will also determine the location of these trims yourself, at your own discretion. You can refuse them and decorate the jumpsuit in any other way, for example, embroidery or appliqué.
You determine the emphasis of the product yourself. This can be a combination of contrasting fabrics, piping, trim, decorative stitches, various accessories, etc.
Stand collar can be made in different variations: fur, fleece, knitwear, etc.
In addition to the main details, you need to cut a belt, the length and width of which you can calculate yourself, depending on the type of buckle, the width of the elastic and its elasticity.
Before you start cutting, as always, you need check the pattern. Take the time to take a centimeter and compare the measurements you took with the dimensions of the drawing.
The pattern is given no seam allowances.
The lining and insulation are cut according to the main patterns.
In the following articles we will continue the topic winter clothes for our little clients.
If you have any difficulties with printing patterns, write to us and we will post a master class with the details of this process.
The magical winter has come - time for fun winter activities and games fresh air. What can cause more affection in adults than the sight of children jumping joyfully, running races along beautiful snowy alleys and also playing with snowballs? However, we must remember that winter is also cold weather, when the likelihood of various diseases increases. Therefore, for caring and smart parents, winter is also a reason to update their wardrobe.
To put it simply in simple language, overalls are a suit for girls and boys, representing the combination of a jacket and trousers. A pattern for children's overalls will help you quickly make such a product. At the moment, a very popular trend on creating children's overalls. They are not only beautiful, but also comfortable, which allows them to become the most the best clothes in children's fashion.
Winter overalls are part outerwear. Every mother wants to dress her child not only cute, but also comfortable. Such clothing shows a variety of qualities that meet all the important requirements of the seasons.
Due to their simplicity, these products can be used for demi-season, summer and even winter. It all depends on what you need the overalls for and what time of year you are going to use it. In stores they offer big choice this type of children's clothing, jeans overalls are in fashion now. Denim products They keep you warm no worse than winter clothes with linings.
When choosing a summer jumpsuit, it is quite important to look not only at appearance, but also on the material itself. If this is a winter product, then we look at the filler.
All girls want their children to wear comfortable and comfortable products. Besides the fact that they should be cute, such things should keep babies healthy even during a very cold year.
Now it's very jumpsuits are often made - transformers. They can vary from removable gloves and legs for the little ones, to removable sleeves and a removable special torso. As we have already covered earlier, this type of clothing is made from completely different fabrics: fleece, jeans. Such denim clothing is in demand in different time of the year. There are also fur overalls, but they belong to winter season, and not for summer. If the child has a good warm Winter Jacket, then you can only worry about purchasing semi-overalls - these are warm pants with straps, which in combination with a jacket are also a convenient option for warm clothing. You can cut and sew overalls and overalls using one pattern, and such clothes will be useful even for a newborn. A pattern for a lining for fleece or warm overalls for babies from 0 months, or older children can be made with your own hands completely free of charge - construction will not be difficult.
Cutting and preparation of materials
As for the material that we will use in our work, the choice depends entirely on your desire and imagination. The main thing when choosing a material is to take into account that we are making a thing for a child, so the following requirements must be presented to the material:
- The material must be practical.
- The material must be strong and not wrinkle.
- The material should not attract dirt, dust, or moisture.
The main canvas should be about sixty or one hundred centimeters in size, the lining should be created from quilted material the same size. It is clear that we will choose almost the same dimensions for the linings. We also need some decorative fabric for decoration.
More likely, there won't be any problems here, various shreds and strips of such material can definitely be found in any woman’s supplies. You will also need an elastic band about thirty centimeters long, a cord about seventy centimeters long, a flat zipper about twenty centimeters long and a spool of strong thread.
The finished pattern can be easily downloaded on the Internet. It needs to be printed on a printer in 1x1 size, cut out, and then the fabric should be drawn out using a paper template. When cutting fabric, keep in mind that you need to leave allowances of 1 cm.
Pattern of overalls for a baby: how to sew
Simple rompers It is created with insulation and will not let your child freeze. This universal product is suitable for both boys and girls. And even walking in winter overalls is pleasant and comfortable for a long time and that is why most parents prefer children's overalls. Basic description and important conditions for pattern.
