These little ones bright strawberries even beginners can sew. Sew a few of them, put them in a basket and they will enliven your interior and will remind you of the past summer for a long time)
To begin, select a few scraps of bright, rich fabrics in red and pink shades(I used American cotton for the patchwork). If the fabric is smoothly dyed, you can bring the strawberry to life by embroidering a few grains using floss and simple stitches.
For leaves You will need pieces of green felt. If you don’t have felt, you can sew leaves from green fabric. This is a little more complicated, but the result will also be excellent.
For stuffing We use holofiber or synthetic fluff.
We also need scissors, a needle and thread in color, paper, a pencil, pins and sewing machine and skillful hands)...
We start by making a pattern. I tried a lot of options, so all my strawberries turned out different. But the basic option is to cut out a rectangle, for example, 6 by 7 cm. Bend it in half, then in half again to determine the middle. Draw the lower part of the berry in the form of a rounded cone. Cut it out. In the future, after sewing the first strawberry, you will understand where you want to add or subtract and you can adjust the pattern to your taste))
We take a suitable pink or red fabric, apply our pattern and cut it out, taking into account the seam allowances. I usually do 0.6 - 0.7 cm.
We go to the machine and make a stitch right along the outline of the pattern. At the beginning and end of the stitching we make securing stitches, making a couple of stitches back and forward again. We cut off the excess threads.
When turning the stitch, raise the presser foot, leaving the needle in the fabric, so the turns will be smoother, without displacement. I usually choose 1.5-2 mm stitch length. And the tension is 4.5.
Then we remove the pins and the pattern and make cuts with scissors along the outer edge of our strawberry, not reaching 2 mm to the seam, or simply trim off the excess with zig-zag scissors. Fold the top edge 0.7-1cm and iron it
We turn our strawberry inside out, take a thread and a needle and collect the needle along the upper edge with a simple seam forward. There is no need to grind, a stitch length of 0.5 cm will be enough. We do not cut the thread!!!
Then we fill our strawberry with what we have at hand - padding polyester, padding polyester, woolen sliver, hay, sawdust))) I’m kidding)) I prefer to stuff with holofiber balls and stuff it very tightly, usually helping myself with a Chinese sushi stick...
When you are sure that there is enough stuffing, tighten our thread and tie it with a strong knot. If you are planning to embroider your strawberry using floss, now is the time. And I'll skip this stage and move on to the leaves. To do this you will need a piece of felt and floss for the loop. You can cut out the felt right away, or you can first make a paper pattern by cutting out leaves from a 5 by 5 cm square. I made a rope from floss, folded it in a loop and tied a knot at the end.
Continuing the topic of food started last time, in which we prepared delicious preparations for, today I would like to treat you all to a fragrant, ripe berry, rich in vitamins and antioxidants. These are felt strawberries, friends.
You know, I believe that if you surround yourself with something bright, juicy and highly fortified in winter, then viruses will be afraid to get close to you and you won’t want to get sick. Of course, this is partly a joke. But we will still make strawberries.
Felt strawberries. We get our vitamins while playing
Felt strawberries, sewn using this pattern and this master class, can organically fit into your child’s toy food set or become the main decoration for a headband, hairpin or some other hair decoration. It can also become an original keychain for keys or even a phone.
I’ve also recently been very impressed by the ideas of decorating the kitchen space with beautiful glass jars with different fillings. Why not put 7-8 juicy strawberries in one of these jars?
But before these amazing transformations are possible, we need to do two important things - collect what we need for the job and make sure we have a suitable pattern.
Felt strawberry pattern and list of materials for work
To make it you will need next list materials:
- green and red felt
- white, red and green threads
- white beads
- padding polyester
- glue gun
As usual, I use hard felt, 1 mm thick. This time, instead of floss, I decided to take the simplest sewing threads. The beads are also the most common ones, made in China.
You can take my pattern for felt strawberries. It is located at this address. After printing, cut out the berry part and the sepal part. We sew white beads onto the berry detail in a checkerboard pattern.
This is what a beaded strawberry pattern piece made of felt looks like
The next step is to join the strawberry pattern piece into a cone. To do this, fold it in half (with the beads inward) and sew it along the straight edge with overcast stitches over the edge. Having reached the edge, we perform a tack, but do not break the thread.
We turn the part inside out, straighten the seam and carefully decorate the corner. As mentioned earlier, we do not break the thread. We use it to sew the berry detail along the entire perimeter of the upper round cut with straight stitches and tighten the thread.
We do not stuff the part big amount padding polyester, pull the thread to the end, fasten it and cut the thread.
We only have a little left. Decorate the sepals. To do this, we sew the sepal part along the edge using overlock stitches. Special attention pay attention to the corners. They must be worked out with special care.
After the sepal is finally formed, we simply glue it to the shikora part of the berry.
I think it turned out well! Having sewn a dozen or two of these berries, you can safely fill a wicker basket with them or give all this wealth to your baby. Let him treat all his friends in the yard to a freshly harvested, and most importantly, healthy harvest.
Sweet, bright and juicy strawberry! Such berries will not leave anyone indifferent! And if, before gluing the sepal, you make a small hole in the center of it and insert a small loop of cord, then such a berry can be safely attached to something as a pendant or keychain.
In my opinion, the idea with toy berries is much more interesting. Although... perhaps you will have even more interesting thoughts and decide to adapt your felt strawberry harvest for completely different purposes.
I wish you creative success and good mood!
TatianaSmall, funny, juicy and almost real strawberries, sewn from felt, can easily become an element of kitchen decor, decoration festive table, keychain or toy food for a child. Sewing these strawberries is not at all difficult, but you will need the following materials:
- Red and green felt.
- Filler (sintipon or halofiber).
- White threads.
- A sheet of paper for the pattern.
Draw a pattern on a piece of paper. Its size depends on what kind of strawberries you want - large or small. On one side of the semicircle you need to make a small cut, as shown in the photo.
Attach the pattern to the red felt and cut out the pieces for the strawberries. Cut out future leaves of any shape from green felt.
Sew three mini cones from red felt, leaving them open. Then each of them must be filled with halofiber. Quilt the upper part along the contour and immediately pull it off so that you get a product that resembles the shape of a strawberry. Using white thread, sew the strawberry so that dots appear on its surface, which give it a natural look.
Using green thread, sew the leaves to the strawberries. If you want to make a keychain or pendant, you need to sew a satin ribbon or braid in the form of a loop to the leaves.
Strawberries from nylon. Master class with step-by-step photographs.
Master Class " Strawberry meadow with your own hands."
Shestak Tamara Yurievna, teacher additional education children MBOU DOD Youth Center "Harmony", r.p. Chany, Novosibirsk region.
Purpose: The master class is intended for children 7-12 years old. Also, the master class can be useful for additional education teachers, technology teachers, parents and just lovers of handicrafts. The resulting composition can be used to decorate the interior, as a souvenir or gift to a loved one.
Target: Creating a flower and berry bouquet.
Tasks:
1. Teach techniques and methods of working with nylon, careful and economical attitude towards the material used.
2.Develop aesthetic taste, creative imagination, fine motor skills hands;
3.Cultivate interest in working with nylon, love for manual labor, accuracy and perseverance.
Handicrafts made from nylon are comparatively the new kind creativity. Very few people know that nylon tights can be used to create things of amazing beauty and originality. I bring to your attention a master class on creating a bouquet of strawberries made from nylon.
To make berries, I use ready-made colored nylon, which I buy in craft stores. But you can paint white nylon yourself. There are several methods of painting; you can learn more about them in any Internet sources.
Strawberry berry
Little sister to the sun.
Ripens in summer
It brings joy.
The kids are enjoying themselves...
Better than candy!
A storehouse of vitamins
They gathered in the berry.
Create a magical
Its nectar is medicinal.
Children are having fun
Grandparents
Moms and dads...
Everyone is happy about strawberries!
/Nezhelskaya T./
Rules for safe work with scissors:
1. Maintain order in the workplace.
2.Scissors must be well adjusted and sharpened.
3. Store scissors in a specific place (box, case or stand).
4.When using scissors, you must not be distracted; you must be as attentive and disciplined as possible.
5. When passing the scissors, hold them by the closed blades.
6. Place the scissors on the right with the blades closed, pointing away from you.
7.When cutting, the narrow blade of the scissors should be at the bottom.
8.Do not play with scissors, use them only for their intended purpose.
Rules for safe work with gypsum and gypsum mortar:
1.Do not allow dry plaster to get into your eyes. In case of contact, rinse with plenty of water;
2. Do not allow gypsum dust to enter the respiratory tract;
3.When working with gypsum mortar, protect your hands with rubber gloves.
Necessary materials:
Nylon green, red, white;
Foam rubber;
- padding polyester;
- wire (diameter 0.5 mm and 0.3 mm);
- green floral ribbon;
- green, red threads, white flowers;
- scissors.
Progress:
Strawberries.
For strawberries, you need to cut a small cone out of foam rubber.
Tear off a piece of padding polyester with your hands (tip: in order for the padding polyester to lay flat on the foam rubber, the padding polyester needs to be torn off with your hands and not cut off with scissors).
Wrap the resulting piece of padding polyester around a foam cone. The result was a preparation for the berry.
Next, take the red nylon, cut off a piece, cut it lengthwise so that you get 2 pieces of nylon.
We use one of these pieces to cover our berry preparation. For the stem, take a piece of wire (diameter 0.5 mm) and make a loop at the edge.
We insert the wire into the resulting berry, stretch the nylon, and tie it with red thread.
Making the sepals:
You need 5 pieces of wire with a diameter of 0.3 mm. We wrap a shape of a suitable size (a spool of sewing thread).
This makes 5 wire rings.
Take green nylon and cut it into 5 small pieces.
We tighten the wire rings. Tie with green thread.
We cut off the excess nylon and threads.
Use your fingers to give the resulting pieces elongated shape.
We collect berries.
We tie green leaves to the stem with threads to create a future sepal.
Wrap with floral tape. The berry is ready.
You can make as many of these berries as you like. I have 13 of them.
Leaflets
To make leaves you need 3 pieces of wire with a diameter of 0.3 mm. and 3 pieces of green nylon.
We take the wire and wrap it around a large needle or knitting needle.
It turns out to be a spring.
We pull it out, twist the 2 edges of the wire together. The result was the basis for the leaf.
We make 3 such blanks.
We cover it with green nylon and tie it with green thread.
Cut off excess nylon and threads.
We collect the stem.
We wrap leaves on a long piece of wire (0.5 mm in diameter) with green thread.
We wrap one leaf.
We wrap the second leaf.
We wrap 3 leaves.
We wrap the finished stem with floral tape. Our stem is ready.
Make 7 such stems.
Flower
Prepare 5 pieces of wire (diameter 0.3 mm). Wrap the spool of sewing thread. It turned out 5 rings.
Cover the rings with white nylon and tie with white thread. Cut off excess nylon and threads.
We collect a flower.
We wrap white rings with thread on a long piece of wire. To prevent them from slipping off the long wire, you need to wrap one edge on which we will attach the petals of the future flower with floral tape and only then attach the white petals.
The result is a flower. Wrap the stem with floral tape.
Today I will share with you how to make beautiful decoration- a sprig of fabric strawberries.
Products self made are winning more and more people's sympathy. They are very beautiful, practical and of course exclusive. If you or your children are wearing handmade jewelry, they will definitely not go unnoticed.
What can I say if this product is made by you yourself? There is a reason for pride here. But the most interesting thing is that such products are easy to make at home, at minimal cost. The main desire.
To make strawberries from fabric we need:
1. Fabric, preferably velor
2. Satin or grosgrain ribbon 2.5 cm wide.
3. Moment Crystal glue or hot glue gun
4. Needle, thread, scissors
5. Wire
6. Tape for making letons or corrugated paper
7. and glass
8. Fittings for the middle
9. Beads for decorating strawberries.
So let's get started.
First we will make flowers. I will not describe the process of creating flowers, since it was described earlier in the lesson. You can watch the tutorial and make petals and combine them into flowers - Flowers from satin ribbons Master Class. Round petal.
After the flowers are ready, we make a center for them. Take a piece of wire, thread a bead through it and twist it. Next (if there is one, we pass it through the rosette for the bead) and pull it through the middle of the flower.
The flowers are ready, let's move on to creating strawberries.
Take a piece of velor, cut out a circle with a diameter of 8 cm and cut it in half.
Fold one of the parts of the circle in half with the right side inward and sew it together at the cut.
Turn the strawberry right side out, stitch along the top edge with thread, then put any filling inside and tighten the thread.
We wrap a piece of wire with tape, insert it into the strawberry and sew up the top of the berry with thread.
Then we stitch the entire surface of the berry with beads, imitating the seeds. We put a rosette for the bead on the branch. The berry is ready.
Let's take care of the leaves.
Draw leaf templates on a sheet of paper. Next, we apply tape and a template to the glass, and we will cut out the leaves using a burner. If you don’t have a burner, you can cut the leaves from the tape and burn the edge on a candle, but you won’t be able to get a beautiful carved edge.
We prepare the letons - we wrap part of the wire with tape.
