Everyone knows that the profession of a builder and a finisher is respected, vital and considered, though difficult, but profitable. Without builders, finishers, there will be no home, no comfort in the house. And, like any profession, construction workers have their own professional holiday. They celebrate the New Year, of course, with the whole world, together, but they bring their Christmas trees. 😉
I propose to admire one of these construction Christmas trees, which was made from improvised means left over after finishing the ceiling. The Christmas tree is low-budget, it will not hit your pocket, so if you are looking for an interesting creative idea to bring to life for the New Year, then take a closer look at this original decor element. Here and now you will find out which ones are in your leisure time. >>>
This copy was made with gold pens Olga Malinovskaya (Melnik) no glue or nails, almost nothing. Only one ceiling tile was used. To repeat the decorative New Year's idea, you will need a dense ceiling tile, homogeneous in composition at the cut. You can take a structural one, without embossing. As the author notes (presumably this was not the only instance of a snow-covered beauty), if there is a pattern on the tile, then a one-color tile with imitation of frosty patterns, which are on glasses in frost, will look beautiful.
The tile is cut according to the principle of a puzzle from one sheet, and the parts are connected to each other "groove to groove" absolutely without glue. By the way, not all ceiling tiles are exposed to the glue. Styrofoam tiles, for example, melt on contact with certain adhesives (personally tested).
With the correct cut, three details are obtained from one tile. If convenient, you can use the following template:
True, you will have to sketch from the screen, or make your own patterns, since the author did not make a pattern or does not give it. It is also noted that the photo distorts the real picture. It is also worth considering a small nuance! If the tile is one-color, then you should not worry, but if it is colored, then when cutting the last, third side of the tree, you will need to turn the pattern over with the other side, because 2 sides are the same, and one has outlines in a mirror image. Of course, you only need to draw and cut from the inside out.
Olga made an ornament in the form of gold "" on the Christmas tree from strips of isolon. The strips on one side are narrower, and on the other, they are wider and narrower as a result. It is necessary to start twisting "cones" from a wider edge into a spiral. Twisted in this way "cones" (or perhaps it is even better to call them "roses") are then attached to the decorative crown of the ceiling tile with an ordinary tailor's needle-pin. The crown is done in the same way. Ornaments can also be secured with tailor's pins. The author hung her old beads on the stylish beauty, and you must admit that everything looks very pretty!
So the builders have not only their own holiday, but also their own professional Christmas tree. To repeat the decorative idea, in principle, is not difficult, there would be a desire and the right ceiling tile! 😉 I do not advise taking cheap foam tiles, as they are very difficult to cut evenly, they crumble right under the knife.
Many thanks Olga Malinovskaya for such a great idea and permission to share the news on other blogs. When quoting the name of the author, indicate! And of course, an open hyperlink to the site from which you are quoting is required.
Well, friends, how do you like the idea? Who has already run for the tiles? 😉 You can freely write your opinion in the comments, because there is absolutely no need to register for this!
Enjoy your leisure time and the successful implementation of decorative ideas from the site and, of course, Happy New Year!
After renovation, a lot of residues from coating materials usually remain in the house. Many people think about where they can be used with benefit. The remnants of wallpaper, for example, are used to paste over furniture, interior items or to make a cover for homemade notebooks. What can be made of foam ceiling tiles? Some use them as a basis for DIY crafts.
Ceiling tile craft options
The simplest options for products that can be made from foam ceiling tiles are Christmas tree decorations or pendants. Children will love to spend time with you decorating such decorations. They are done very simply:
- the desired shapes are drawn on the foam residues: hearts, stars, snowflakes, little men, etc.;
- cut them out with clerical scissors;
- individual figures are decorated or pasted on them using PVA glue, drawings are sewn on, decorative elements are sewn on.
The composition of the paint used to decorate foam products should not include acetone and other active substances that can melt the foam. It is better to paint ceiling tile crafts with gouache, felt-tip pens or oil paints.
You can make a voluminous Christmas tree for the New Year, paintings on various topics, houses, cars, etc.
Ceiling tile paintings come in a variety of sizes and functions, such as postcards. They can be decorated in the form of a valentine. To do this, neat hearts are cut out of the tile and decorated with sparkles, beads, decorated, and appropriate inscriptions are made with felt-tip pens. You can make postcards in the form of a book: cut out two identical parts from polystyrene and connect them with a glued strip of decorative paper.
If you know how to draw well, create a masterpiece, paint a landscape, still life, or something else to your liking on the cut out piece of tile. The paintings can then be hung on the wall and shown to relatives and friends.
Another option is to hang photos of your loved ones on a foam base and decorate it with rain, sparkles, small toys or decorations. It all depends on your imagination, in this case there is an opportunity to show it to the fullest.
How to cut a glider from a ceiling tile
The most popular foam product that kids love is the ceiling tile glider. It is quite easy to do, you will need the following materials:
- ceiling tiles without a pattern;
- PVA glue;
- wooden lath, preferably pine with a section of 4x4 mm and a length of 1922 cm;
- buttons;
- pins;
- clothespins;
- templates;
- markers, felt-tip pens, pens;
- office knife;
- skin for sanding;
- plasticine.
First you need to cut the template. Drawings of various gliders can be found on the Internet and you can choose the model to your taste. The printed and cut elements must be glued to the cardboard, then attached to the tile, fixed with buttons or pins and circled. After that, they are cut out with a clerical knife with an allowance of 12 mm.
Now the workpieces are sanded to give smoothness and smoothness to the surfaces of the wing and the forward-backward motion stabilizers. The parts should be sanded smoothly and carefully so as not to spoil them.
The next step is gluing all the elements. The lath is coated with PVA glue on one side and the other and left for impregnation. Mark the middle on the wing and stabilizer and coat the bottom with glue along the middle line. Then all the details are fixed with clothespins, the keel is attached with pins to the wing along the midline.
After 68 hours, the mounts can be removed and the glider adjusted. To set it up, you should start the model from your hands and see how it flies. If the glider is rapidly gaining height, then you need to make the nose heavier by sticking a piece of plasticine to it. If the model dives sharply, then the tail must be heavier and the plasticine must be glued to it or the stabilizer must be bent down.
So, if you decide to decorate your ceiling with foam tiles, remember from the remnants of the material you can create useful products or make toys for your children.
Irina Kononova
Such christmas tree can be done with a child at home in a few evenings and without high costs
You will need the following materials:
Smooth white ceiling tiles;
Acrylic paint;
Light green tinting paste. dark green, blue colors;
Universal polymer glue;
Stationery knife;
Thin elastic wire;
A set of beads or old beads.
We make patterns for parts Christmas trees made of paper.
Cut out four symmetrical details:
1 - top Christmas trees(bottom part,
2 - top Christmas trees(top detail);
3 - bottom Christmas trees(bottom detail);
4 - bottom Christmas trees(top detail)
and one detail - "snowdrift".
Laying out the details on the sheet ceiling tiles on the back and outline with a ballpoint pen.
Using a clerical knife, we cut out the details herringbone ceiling tiles
Let's start coloring.
Dilute some green paint (no more than a teaspoon will be needed)... We will paint over the front side of the details with it.
First, paint over the sides (thickness tiles)
Then we paint over the front side of the parts.
Now we breed light green and blue paints (even less will be needed)
We paint the upper parts with light green paint Christmas trees
We paint with blue paint "snowdrift"... Let the paint dry.
We collect herringbone.
With glue (a small drop is enough) we connect the lower parts Christmas trees(top and bottom)... Let the glue dry a little.
To the bottom Christmas trees glue on the top part. We use a small amount of glue (one drop in the center of the part).
We glue the upper part on the upper part Christmas trees.
Glue herringbone on"snowdrift"... Let the glue dry well.
We decorate herringbone
We make small staples from the cut wire.
We pass the wire into the beads.
We pierce herringbone through with a staple with a bead.
Bend the ends of the wire from the seamy side
For Christmas tree garlands we put beads next to each other. You can string several beads on one wire.
We place balloons and other decorations all over herringbone in no particular order.
Now I'm ready Christmas tree.
Such herringbone can be attached to a wall or any flat surface. For this, it is enough to "snowdrift" on the seamy side, glue two strips of thin double-sided tape and glue Christmas tree in the place you need.
You can glue a small magnet and hang on the fridge
HAPPY NEW YEAR!
Related publications:
Teamwork "The clouds woke up with a sunny smile" from the ceiling tiles. Master class Cloud woke up With a sunny smile ,.
Good day, dear colleagues and friends! I bring to your attention a master class "Chicken for a walk" Before you start work.
Purpose: Transfer of experience by direct and commented demonstration of the sequence of actions, techniques, forms of pedagogical activity at.
Fall! Sweet smell of apples, Unprecedented harvest, Many of them under the canopy of apple trees, Bend over, pick. I really enjoy this wonderful time.
New Year is just around the corner to keep your child busy on cold winter evenings and get ready for the upcoming holiday. I propose a master class.
Ordinary foam ceiling tiles can be used to make unique decorations and crafts for the New Year. The article contains examples of such and a description of how to do them.
Often there is a desire to decorate your home with festive crafts. This ritual is especially important on the eve of the New Year. After all, it is for this celebration that people are waiting for some kind of miracle. Children expect magic in the first place, so they try hardest.
Crafts can be made from various materials, and there is a lot of information about this on the online spaces. Very original Christmas tree toys are obtained from ordinary foam tiles, which are glued to the ceiling. Next, let's look at examples of Styrofoam Christmas decorations in detail.
How to make a white fairy house from ceiling tiles: diagrams, descriptions, photos
To get started, first of all, stock up on free time. This process will require patience, skill, desire. And kids will be delighted with such work.
Prepare materials, tools in advance:
- scissors, marker, glue
- tile, sharp knife
- felt-tip pens, gouache, colored paper, foil
The house can be made in one plane, or rather, simply cut out the pattern of the roof, front panel with a window and a pipe on the roof from the foam. Or you can build a whole 3-D model of a real fabulous gingerbread house or Baba Yaga's hut.
For the second option, do the following:
- Cut four sides of the house out of foam
- Two identical roof pieces
- Two isosceles triangles for the front and back of the attic part of the building
- Then carefully make openings where there will be windows, doors
- In the future, they can be decorated with colored paper, curtains can be made inside
- Glue all finished parts of the product
- Cut the pipe and glue it to the roof
- To make the house more fun, you can still make a whole courtyard
- There, make a Christmas tree in the yard (again, from foam)
- With felt-tip pens, paint it and draw toys on the branches.
How to make snowflakes from ceiling tiles: templates for cutting, photos
What a New Year's holiday without beautiful white snowflakes of different shapes. They are cut not only from paper, but from ceiling tiles. But it should be borne in mind that the foam cannot be folded like paper so that the snowflake turns out to be strictly symmetrical.
To create neat products, you need templates (templates that you can make out of cardboard). Subsequently, such templates are not difficult to transfer to the material using an ordinary felt-tip pen, it is enough just to outline the contours.
You will see a number of such examples of patterns in the image below.
They can be printed on a printer, and then carefully cut, glued to more durable paper. Again, cut out, after which you can safely transfer them to the foam tile.
Now cut the intricate patterns of snowflakes with a sharp knife on the foam. Hang the finished products on the Christmas tree or decorate them with garlands, chandeliers in the house.
IMPORTANT: When you cut snowflake figures from ceiling tiles, keep in mind that the material is brittle and the process should be done carefully, with maximum accuracy.
How to make a Christmas tree from ceiling tiles?
If the tree is already in the house, then the children know that on New Year's Eve gifts will appear under it. But there are unexpected situations when adults did not have time to buy the most important symbol of the New Year. In this case, do not be upset, a pretty tree will turn out from various sizes of ceiling tiles.
True, for the product you need a thicker tile. In addition, the number of squares must be collected more, then the artificial beauty will come out in a large size.
Fold the squares in the form of a pyramid, as in the picture below. Glue a small top at the top.
Christmas tree - do it yourself IMPORTANT: Any decoration for the Christmas tree will do. Silver rain, garlands, beads will come in handy.
How to make Christmas tree decorations from ceiling tiles?
As Christmas tree decorations, you can use a variety of figurines for a suitable New Year theme.
Santa Claus with gifts 
Deer - do it yourself 
How to make ceiling tile decorations?
From one ceiling tile, you can cut dozens of small decorations that are hung on the front door or in other places on the eve of the New Year's celebrations.
Those who can draw well will effortlessly decorate their products beautifully with felt-tip pens, gouache and other auxiliary materials. So that they hold on to garlands, a Christmas tree, tie threads to stars, bells, snowflakes.
Beautiful decorations for the New Year IMPORTANT: Observe safety rules. After all, the foam melts, easily ignites when exposed to high temperatures, fire. Therefore, it will not hurt you to explain to your child that you cannot indulge in fire, so that a fire does not happen.
How to make flowers from ceiling tiles?
Flowers, like snowflakes, must be cut out after you transfer the drawing from the template to the foam. To make them different colors, paint them with gouache. A varied ornament will turn out on the surface of the flowers, since there are interesting patterns on the ceiling tiles.
How to make a snowman from ceiling tiles?
Using the applique technique, make a snowman from a ceiling tile. Then place it under the tree on a small stand made of another tile so that it does not fall. A cheerful snowman will delight you and your children, charge you with positive emotions throughout the winter holidays.
Snowman for New Year's holidays from ceiling tiles How to make Santa Claus from ceiling tiles?
A cute Santa Claus on a Christmas tree in the form of a toy will turn out if you cut it out of a pattern from a ceiling tile. In addition, for a beautiful design, you can wear it in a hat, a fur coat made of red fabric. And paint your face with paints. Make a beard, mustache, edging of white plush. Progress:
- Cut Styrofoam Parts
- Start by collecting the bottom of the tank
- Glue all other parts of the craft
- Gently paint it with felt-tip pens, paint.
Styrofoam is a great material for this type of craft. If you have imagination, you will come up with various toys for the New Year yourself. Thus, please yourself and your little family members by making them together.
Video: How to make a plane from ceiling tiles?
