Size: 42
You will need: 1000 g of cotton yarn of medium thickness, yellow, 5 buttons in tone and 130 cm of tape 2 cm wide in tone. Spokes number 3; 4 and hook number 3.
Patterns: Garter knitting (boards, knitting): all items.
Front surface (person. Surface): persons. R. - persons. n., out. R. - out. NS.
Fantasy pattern: according to scheme 1.
Hook: Air loop (c. P.): In p. Insert a hook, put a thread on it and stretch through p.
Column without crochet (st. B / n): insert the hook into the item of the chain or the bottom p. and pull out a new st, grab the thread and knit 2 sts on the hook in 1 step.
Half-column with a crochet (half-crochet): make a crochet on the hook, insert the hook into the chain and pull out a new point, knit 3 points on the hook in 1 step.
Column with 2 yarns (st. With 2 / n): make 2 yarns on the hook, insert the hook into the chain stitches and pull out a new stitch, knit 4 stitches on the hook in pairs in 3 steps.
Finishing: according to scheme 2.
KNITTING DENSITY: 10 cm x 10 cm = 24 p. X 27 p.
Back: On needles number 3, dial 105 sts and tie 2 cm of boards, knitted. Continue knitting with needles number 4, distributing p. Trail. way: 1 chrome., 6 p. persons. stitch, 91 p. according to the scheme 1, 6 p. persons. satin stitch, 1 chrome. At a height of 4 cm from the beginning of knitting, for fitting, subtract on both sides in each 12th p. after 1 chrome. 3 times 1 p. = 99 p. After 16 cm from the boards. add knitting on both sides in each 16th p. 3 times 1 p. = 105 p. At a height of 34 cm, close 5 p. For armholes on both sides, then in each 2nd p. 4 sts, 3 sts, 3 times 2 sts and 2 times 1 sts = 65 sts. After 13 cm from the beginning of the armholes, close the central 41 sts for the neckline and knit 12 sts for each shoulder separately. At a total height of 55 cm, close p.
Front: Knit like a back. At a height of 40 cm, close the central 15 points for the neckline, on both sides of them in each 2nd p. 2 times 3 points, 2 times 2 points and 2 times 1 point. At a total height of 55 cm, close 12 points for each shoulder.
Assembly: Pin the details on the pattern, moisten and let them dry. Sew one shoulder. Along the edge of the neckline on the needles No. 3, raise 178 p., Tie 4 p. boards. viscous, performing in the 3rd p. in the corners of the neckline of the back, 3 sts together, and then close all sts. Sew the second shoulder. Along the edges of the armholes on the needles No. 3, raise by 114 p., Tie 4 p. boards. viscous and close p. Run side seams.
JACKET
Back: On needles number 3, dial 107 sts and tie 2 cm of boards. viscous. Continue knitting with needles number 4, distributing p. Trail. way: 1 chrome., 7 p. persons. stitch, 91 p. according to the scheme 1, 7 p. persons. satin stitch, 1 chrome. At a height of 4 cm from the beginning of knitting, for fitting, subtract on both sides in every 10th p. after 1 chrome. 4 times 1 p. = 99 p. Through 17 cm from the boards. add knitting on both sides in each 12th p. 4 times 1 p. = 107 p. At a height of 36 cm, close 2 p. For armholes on both sides, then in each 2nd p. subtract after 1 chrome. 4 times 1 p. = 95 p. After 21 cm from the beginning of the armholes, close the central 33 p. And on both sides of them in the 2nd p. 5 p. Simultaneously close for the bevel of the shoulders in each 2nd p. 2 times 9 p. And 8 p. Total height about 59 cm.
Right shelf: On needles number 3, dial 53 sts and tie 2 cm of boards, knitted. Continue knitting with needles number 4, distributing p. Trail. way: 1 chrome., 4 p. persons. stitch, 40 p. according to the scheme 1, 7 p. persons. satin stitch, 1 chrome. Knit, sewing on the side of the side seam, armhole and bevel of the shoulder, as on the back. At a height of 33 cm from the beginning of knitting, subtract the neckline from the opposite side to bevel, alternating in every 2nd and every 4th p. after 1 chrome. 11 times for 1 p. And then in every 4th p. 10 times 1 p. The total height is about 59 cm.
Left shelf: Knit symmetrically to the right shelf.
Sleeves: Knit 2 separate pieces. For each piece on knitting needles No. 4, dial 34 sts and knit, distributing p. Trail. way: the first 34 p. knit - 1 chrome., 2 p. persons. satin stitch, 28 p. according to the scheme 1, 3 p. boards, viscous; track. 34 sts to knit - 3 sts of boards, knitted, 28 sts according to scheme 1, 2 sts of persons. satin stitch and 1 chrome. Knit, adding from the outside of each detail in every 6th p. 4 times 1 st. At a height of 6 cm, combine sts of both parts, continue knitting, performing average 6 sts of boards. knit for 4 r., and then knit all sts with a pattern according to scheme 1. At a height of 15 cm from the beginning of knitting, close 2 sts for the okat sleeves on both sides, decrease in each 2nd r. after 1 chrome. 22 times 1 p. And close the remaining 28 p. The total height is about 32 cm.
ASSEMBLY: Pin the details on the pattern, moisten and let them dry. Sew seams and sew sleeves into armholes. Along the edges of the shelves and the neckline, raise 364 p., Tie 5 p. boards, viscous and close p. On the strap of the fastener of the right shelf, make 5 holes for buttons (sweep 1 p.): the first - about 2 cm from the bottom edge and the last - at the beginning of the neck bevel, distribute the rest evenly. Sew on buttons. Crochet the lower edge of the sleeves with a trim according to scheme 2. Cut the tape into two pieces of 65 cm each, thread them along the lower edge of the sleeves in the 2nd p. trim and tie with a bow.
Dimensions:
You will need: 200/250/300 g of Gedifra Riana melange yarn (50% wool, 45% acrylic, 5% viscose, 120 m / 50 g); 100/100/150 g of Gedifra Riana Big melange yarn (50% wool, 45% acrylic, 5% viscose, 30 m / 50 g); knitting needles number 4.5, number 10, circular needles number 10.
Density of knitting. Needles number 4-5: 18 p. And 25 p. = 10 x 10 cm; knitting needles number 10: 9 p. and 14 p. = 10 x 10 cm.
Back: on needles No. 4.5, dial 90 (104) 118 sts with Riana yarn and knit out. 1st out. R. and 11 p. persons. satin stitch. Next, remove the item of the lower edge on the auxiliary. knitting needle, fold the piece out. sides and knit 1 person. p. from the front knitting needle together with 1 p. from the back knitting needle. Continue to knit out. satin stitch. After 18 cm, close on both sides to fit 1 x 1 p., In each 16th p. 4 x 1 p., 80 (94) 108 p. Will remain.After 53 (51) 49 cm, close for armholes on both sides 1 x 3 (4) 5 p., Then in each 2nd p. 3 (3) 4 x 1 p., 68 (80) 90 p. Will remain.
Next, knit out on the needles number 10. satin stitch with Riana Big yarn, and in the 1st p. perform chrome. n., then 2 out. item together until the end of the river, chrome. p., 35 (41) 46 p. will remain.After 68 cm, remove 15 (15) 16 p. in the middle on aux. knitting needle and knit both parts separately. Close from the inner edge of the cutout in every 2nd p. 3 x 1 p. After 72 cm, close for the shoulders on both sides in each 2nd p. 1 x 3 p. And 1 x 4 (2 x 5) 2 x 6 p.
Front: knit like a back, except for the neck. After 64 cm, remove 9 (9) 10 sts in the middle on the auxiliary. knitting needle and continue each side separately. Close from the inner edge on every 2nd p. 1 x 2 p. And 4 x 1 p. After 72 cm, perform the shoulders in the same way as the back.
Assembly: Sew shoulder seams. For armholes on needles # 10 cast on 46 (50) 54 stitches with Riana Big yarn along the edge of each armhole, then close all stitches at once. Sew side seams. To cut the neckline, transfer the loops from the auxiliary knitting needle, dial an additional 18 sts on both sides between them, in total 60 (60/62) sts. Knit faces. 1 circle. r., then close all p. as persons.
Jacket
The size: 32/34 (P1), 36/38 (P2), 40/42 (P3)
You will need: 500/600/650 g of Gedifra Riana Big melange yarn (50% wool, 45% acrylic, 5% viscose, 30 m / 50 g), 200/250/250 g of Gedifra Riana melange yarn (50% wool, 45% acrylic, 5% viscose, 120 m / 50 g), needles No. 4.5, No. 10.
Note: on every 1st p. with Riana yarn to perform chrome. p., then alternately 1 person. n., yarn; on out. side of the yarn knit out. This will double the number of sts between chrome. On every 1st circle. R. with Riana Big yarn, perform chrome. n., then 2 persons. n. together throughout the river. = initial number of p.
Density of knitting. Persons. satin stitch, yarn Riana Big, needles number 10: 9 p. and 14 p. = 10 x 10 cm; persons. satin stitch, Riana yarn, knitting needles number 4.5: 18 p. and 25 p. = 10 x 10 cm.
Attention: the jacket is knitted with one canvas across.
Work description: with a thread of a contrasting color on knitting needles No. 10, dial 55 p., then knit faces. satin stitch 20 p. Riana Big, 32 (38) 42 p. Riana (= 108 p.), 20 p. Riana Big, 32 (36) 38 p. Riana, 28 (30) 34 p. Riana Big (= middle of the back), 32 (36) 38 p. Riana, 20 p. Riana Big, 32 (38) 42 p. Riana and 20 p. Riana Big. At the same time, after 47 (49) 51 cm, after 16 p. with Riana yarn, knit from the right edge for the armhole 32 sts according to the pattern, then 32 (36) 40 sts according to the pattern and set aside these sts on the auxiliary. knitting needle, knit the remaining 44 (40) 36 sts according to the pattern, then set aside all sts on the auxiliary. knitting needle. On knitting needles No. 4.5 with a thread of a contrasting color, dial 44 (40) 36 sts, then continue all sts of the jacket, and on the 1st wear. R. enter the dialed items instead of those left on the auxiliary. spoke. Through 81 (87) 93 cm, after 16 (20) 22 p. Riana, perform the 2nd armhole in the same way. Through 128 (136) 144 cm, after 236 (258) 274 p. close all p.
Sleeve: on knitting needles No. 10 with a thread of a contrasting color, dial 38 (42) 46 p., then knit faces. satin stitch 30 p. yarn Riana Big, and at the same time close on both sides in each 14th p. 2 x 1 p., 34 (38) 42 p. Will remain. Then knit 32 p. Riana, 28 p. Riana Big and 6 p. Riana, then remove all items on auxiliary. knitting needle = product height 57 cm. Remove the thread in a contrasting color, dial p., then close as faces.
Two size: 38 (42).
You will need: 650 (750) g of "Futura" yarn (54% cotton, 46% viscose, 110 m / 50 g), of which 250 (300) g for the top and 400 (450) g for the jacket; knitting needles number 2.5 and number 3.
Knitting density: 29 p. Persons. smooth surface = 10 cm; 32 p. With openwork patterns = 10 cm.
Garter stitch: persons and n. rows - LP.
Front surface: persons ranks - LP, out. ranks - IP.
Openwork pattern 1: knit according to scheme 1. To perform one crossover, postpone 1 st. before work, lowering the yarn overs of the previous row, postpone 6 sts at work, knit a LP trace. loop, lowering the yarn overs of the previous row, knit the PL of the deferred 6 sts, knit the PL of the deferred loop before work. Run 1-10 rows 1 time according to the scheme, then repeat from the 3rd row.
Openwork pattern 2: knit according to scheme 2. In even rows not indicated on the scheme, knit loops according to the pattern, knit yarn overs for PI. Run the 1-26th rows 1 time, then repeat from the 3rd row.
TOP
Front: On needles number 2.5, dial 110 (122) sts and knit in garter stitch. At a height of 2 cm, switch to knitting needles No. 3 and continue working, distributing the loops as follows: 16 (22) sts of persons. smooth surface, 21 sts with pattern 2 according to the corresponding scheme from A to B, 47 sts with pattern 1, 21 sts with pattern 2 from C to D, 16 (22) sts of persons. smooth. At the same time, in the 1st row, add 11 sts evenly.At a height of 5 cm from the beginning, subtract on both sides, after the first and before the last loops, 5 times 1 st in each 8th row (at the beginning of the row, knit 2 sts. together LP, at the end perform a simple broach). At a height of 15 (16) cm, add on both sides, after the first and before the last loops, 7 times, 1 point in each 8th row. At a height of 30 (32.5) cm for armholes on both sides, close 4 sts and continue to close 8 (9) times 3 sts in each 2nd row. At the same time, for the neckline, close 7 sts in the center and continue to close on both sides of them 9 (10) times, 3 sts in each 2nd row. At a height of 35 (38) cm, close the remaining 4 sts on both sides for each shoulder.
Back: On needles number 2.5, dial 110 (122) sts and knit in garter stitch. At a height of 2 cm, switch to knitting needles number 3 and continue knitting faces. satin stitch. At a height of 5 cm, to form a silhouette, perform subtractions and additions as described for the front. At a height of 30 (32.5) cm for the finishing edge, continue to knit with needles No. 2.5 in garter stitch. At a height of 32 (34.5) cm, close all loops on the seamy side of the work as a PL.
Top assembly: To finish the neck of the front on needles No. 2.5, raise 71 (77) sts along the cutout and tie 2 cm with garter stitch, then close all loops on the seamy side. At the same time, starting from the 2nd row, in the center, subtract 5 times 2 sts in each 2nd row, knitting 3 sts together LP. To trim the right armhole on needles # 2.5, lift 28 (31) sts along the armhole and cast on 135 new stitches for the tie. On the received 163 (166) sts, tie 2 cm with garter stitch and close all loops on the seamy side of the work. At the same time, starting from the 2nd row, after the first loop, subtract 5 times 1 st in each 2nd row (knit 2 sts together with the PL). Finish the second armhole in the same way. Sew side seams.
JACKET
Right shelf: On needles number 2.5, dial 55 (61) sts and knit with garter stitch. At a height of 2 cm, switch to knitting needles No. 3 and continue working, distributing the loops as follows: 4 (6) sts of persons. stitch, 47 sts with a pattern of 1 and 9 (13) sts of persons. satin stitch. At the same time, in the 1st row, add 5 sts evenly. At a height of 5 (6) cm before the last loop, reduce, carrying out a broach, 5 times, 1 st in each 8th row. At a height of 20 (21) cm before the last loop, add 7 times 1 st in each 8th row. At a height of 34 (36.5) cm for the neck after the first loop, subtract, knitting 2 stitches together LP, 22 (24) times 1 st. Alternately in every 2nd and in every 4th row. At the same time, close 4 sts for the armhole of the sleeves and continue to decrease before the last loop 4 (5) times, 1 st in each 2nd row. At a height of 51 (55) cm for the shoulder, close the remaining 32 (35) sts in 3 steps: 2 times 11 (12) sts and 10 (11) sts.
Left shelf: Knit symmetrically to the right shelf. For decrements on the side and armholes of the sleeves, knit 2 stitches together with the LP, for the neck, make simple broaches.
Back: On needles number 2.5, dial 110 (122) sts and knit in garter stitch. At a height of 2 cm, switch to knitting needles No. 3 and knit, distributing the loops as follows: 36 (42) sts of persons. stitch, 47 sts with pattern 1 and 36 (42) sts of persons. satin stitch. At the same time, in the 1st row, add evenly 9 points. At a height of 5 (6) cm on both sides, after the first and before the last loops, subtract 5 times 1 point in each 8th row. At a height of 20 (21) cm, add on both sides, after the first and before the last loops, 7 times, 1 point in each 8th row. At a height of 34 (36.5) cm for armholes on both sides, close 4 sts and continue to decrease after the first and before the last loops 4 (5) times, 1 st in each 2nd row. At a height of 51 (55) cm for the shoulders, close on both sides 29 (32) sts in 3 steps: 2 times 10 (11) sts and 1 time 9 (10) sts. Close the remaining 49 (53) sts for the neck.
Sleeves: On needles number 2.5, dial 63 (69) sts and knit with garter stitch. At a height of 2 cm, switch to knitting needles No. 3 and knit, distributing the loops as follows: 11 (14) sts of persons. satin stitch, 47 sts with a pattern of 1 and 11 (14) sts of persons. satin stitch. At the same time, in the 1st row, add 6 points evenly.Then add on both sides, after the first and before the last loops, 5 times 1 point in each 8th row (6 times 1 point alternately in each 6th and every 8th row). At a height of 13 (14) cm, close on both sides for armholes in 4 sts and continue to subtract sleeves after the first and before the last stitches 24 (26) times, 1 st in each 2nd row. Approximately at a height of 28 (30.5) cm from the beginning, close the remaining 23 (27) sts. Tie the second sleeve in the same way.
Assembling jacket parts: Sew shoulder seams. For front strips and neck tape on needles No. 2.5, raise 104 (112) sts along each side of the shelves, 56 (60) sts along each front neck and 40 (44) sts along the back neck. On the received 360 (388) sts, knit 2 cm with garter stitch, then close all loops along the inside. side of work. At the same time, at a height of 1 cm, make holes for buttons (on the right plank), the first one - stepping back 4 points from the bottom, the rest with an interval of 20 (22) points from each other. For each hole, knit like this: 2 sts together LP, 2 yarns and 1 simple broach; in the next. in a row of yarns, knit 1 PL and 1 crossed PL. Sew side seams, sleeve seams, sew sleeves, sew buttons on the left placket.
Two: a model from the magazine Mani di Fata
Translation: Magazine Craftswoman
32/34 (36/38) 40/42You need
For a jacket: yarn (48% sheep wool, 32% camel wool, 20% polyamide; 180 m / 25 g) - 175 (200) 225 g light gray; knitting needles number 5.5; 5 buttons with a diameter of 26 mm.For the top: yarn (50% sheep wool, 30% alpaca wool, 20% polyamide; 110 m / 25 g) - 175 (200) 225 g light gray; knitting needles No. 4.5 and 5; circular needles No. 4.5.
Patterns and schemes
Front surface
Knit in rows in forward and backward directions: front rows - front loops, purl rows - purl loops.Knit in a circle: knit only.
Purl surface
Front rows - purl loops, purl rows - front loops.Cross ribbed pattern
Knit (needles number 5.5): alternately 4 p. out. smooth, 4 p. persons. smooth.Structural pattern
Knit (needles # 5): the number of loops is odd.1st row: chrome, * 1 out., 1 person., From * repeat, 1 out., Chrome.
2nd row: knit all loops.
Repeat the 1st and 2nd rows in height.
Knitting density
23 p.x 41.5 rubles = 10 x 10 cm, connected with a transverse ribbed pattern (do not stretch the sample when measuring!);22.5 p.x 36 p. = 10 x 10 cm, knitted with a structural pattern (knitting needles - see pattern description).
Pattern
Completing of the work
Jacket
Back
Dial 115 (125) 135 p. And 1st p. (= out. row) knit with the front ones (in further calculations, this row is not taken into account).Knit with a transverse ribbed pattern.
Through 33 cm = 136 p. from the typesetting row close on both sides for armholes 1 time for 9 p. = 97 (107) 117 p.
Through 47.5 cm = 198 p. (49.5 cm = 206 p.) 51.5 cm = 214 p. from the typesetting row, close on both sides for the shoulder seams, first 1 time for 5 (6) 7 p., then in each 2nd p. 2 more times 5 (6) 7 p. and 2 times 6 (7) 8 p.
After 50 cm = 208 p. (52 cm = 216 p.) 54 cm = 224 p. temporarily postpone the remaining 43 points from the dial-up row.
Left shelf
Dial 63 (68) 73 p. And 1st p. (= purl. row) knit.Make the armhole and shoulder bevel from the right edge, as on the back.
When the length of the shelf is equal to the length of the back, temporarily set aside the remaining 27 points.
Right shelf
Knit symmetrically to the left shelf and with 5 button holes.Through 13 cm = 54 p. from the typesetting row for the 1st hole, the 3rd and 4th stitches, knit the front together and make a yarn over. In out. knit a row of yarns with a purl. The remaining 4 holes are made in the same way after each 32nd row.
Sleeves
Dial 61 (63) 65 p. And 1st p. (= purl. row) knit.Then knit with a transverse ribbed pattern.
Through 19, 5 cm = 80 p. (20 cm = 82 p.) 19 cm = 78 p. from the typesetting row, add on both sides for bevels 1 time by 1 p. and 4 more times in each 22nd p. (8 times in every 12th p.) 12 times in every 8th p. 1 p., add loops to include in the pattern = 71 (81) 91 p.
After 50 cm = 208 p. (50 cm = 208 rubles) 48 cm = 200 rubles. from the typesetting row, close the loops in one row.
Assembly
Sew shoulder seams.For a stand-up collar, transfer the left loops of the shelves and back to circular knitting needles = 97 sts and continue knitting with a transverse ribbed pattern. Through 6.5 cm = 28 p. from the beginning of the collar, close all loops with purl.
Sew on the sleeves with a slight fit. Run side seams, leaving the lower sections 8 cm long = 32 p. for open incisions. Sew sleeve seams.
Top
Back
Cast on 87 (95) 105 sts and knit for the lower plank 1.5 cm = 5 p. front satin stitch, starting with out. row.Continue the work with a structural pattern.
Through 15 cm = 54 p. from the bottom bar, add on both sides for the side bevels, first 1 time for 1 p., then 3 times in each 14th p. 1 p., add loops to include in the pattern = 95 (103) 113 p.
After 30.5 cm = 110 p. from the bottom bar, close on both sides for the armholes, first 1 time for 3 p., then in each 2nd p. 1 time for 2 points and 4 times for 1 point, after that in every 4th p. 3 more times 1 p. = 71 (79) 89 p.
Through 48 cm = 172 p. (49.5 cm = 178 p.) 51 cm = 184 p. from the bottom plank, close on both sides for the shoulder bevels, first 1 time for 4 (5) 7 p., then in each 2nd p. 3 more times 4 (5) 6 p.
Simultaneously with the 1st shoulder decrease, leave the middle 33 points of the neck temporarily and finish both sides separately.
To round off the neck, close from the inner edge in every 2nd p. 1 time 1 p. And 1 time 1 p.
Through 49.5 cm = 178 p. (51 cm = 184 p.) 53 cm = 190 p. from the bottom bar, all loops will be closed.
Finish the second side symmetrically.
Front
Knit like a back, but for a deeper neck after 40 cm = 144 p. (41.5 cm = 150 p.) 43.5 cm = 156 p. temporarily leave 17 points of the neck from the bottom bar.To round off the neck, close from the inner edge in every 2nd p. 1 time 3 sts, 1 time 2 sts and 3 times 1 loop.
Assembly
Sew shoulder seams.On the circular knitting needles, transfer the left 33 sts of the back, along the left edge of the neck (between the open loops of the front and back), dial 35 sts, attach 17 left loops of the front and dial another 35 sts = 120 sts along the right edge of the neck. circle 1.5 cm = 5 p. persons. satin stitch, then close the loops with the front ones.
Sew side seams (in the area of the lower plank - on the front side).
On the edges of the armholes, dial 86 (94) 104 sts on circular knitting needles and execute the strips like inlay.
Photo: Verena Podium magazine # 2/2017
A knitted jacket and top make up a comfortable set for cool evenings.
The description of the deuce by designer Pat Menchini is translated from Simply Knitting magazine.
Dimensions:
8 (10, 12, 14, 16, 18)
Chest circumference - 81 (86, 91, 97, 102, 107) cm,
Jacket chest circumference - 89 (94.5, 100, 105.5, 111, 116.5) cm,
Jacket length - 51 (53, 54, 55, 56, 57) cm,
Sleeve length - 32 (32, 32, 32, 32, 32) cm,
Top chest circumference - 83.5 (89, 96.5, 102, 109, 114.5) cm,
Top length - 49 (50, 51, 52, 53, 54) cm.
Necessary materials:
Sablime Cotton Silk DK yarn (75% cotton, 25% silk; 125 m / 50 grams per skein) - 8 (9, 9, 10, 10, 11) skeins for a jacket and 5 (5, 5, 6, 6, 7 ) skeins for a top, 6 buttons.
Instruments:
Knitting needles # 3.25 and # 4.
Knitting density:
22 loops and 28 rows = 10 x 10 cm of front stitching made with needles # 4.
Drawings used:
A panel with an openwork pattern is made according to the scheme:
Knitting a jacket
Left shelf:
Knit as right front to ***.
Change knitting needles to number 4 and knit with front stitch, positioning the panel with an openwork pattern as follows.
1st row (front): 16 (18, 20, 22, 24, 26) front loops, tie 1st row of the panel, 7 (8, 9, 10, 11, 12) front loops.
Row 2: Purl 7 (8, 9, 10, 11, 12), knit 2nd row of panel, purl to end of row.
3rd row: as 1st row, but knit 3rd row of the panel and subtract 1 loop at the beginning of the row.
Continue to knit in the prescribed order as the right shelf, knitting 4-28 rows of the panel rapport. At the same time, decreasing 1 st from the side in every 8th row after the first reduction - on needles 48 (51, 54, 57, 60, 63) sts.
The panel is fully connected.
Go to the main picture:
Next row: Knit 25 (27, 29, 31, 33, 35), knit 1, knit 3 together, knit 1, knit 20 (21, 22, 23, 24, 25).
Next row: purl loops.
These two rows make up the rapport of the main drawing.
Continue to knit like the right shelf from **** to the end, decrease for the neckline as follows: knit up to the last 3 loops, knit 2 loops together with the front one with a tilt to the right, 1 front loop.
Shelf strapping:
With 3.25 needles cast on 7 loops.
1st row: K 1, - to the end of the row.
Repeat this row until the length of the harness is sufficient to stretch it slightly along the entire edge of the left shelf to the middle of the neckline of the back.
Close the loops.
Mark with markers on the harness the location of the 6 for buttons. The first top button should be level with the beginning of the bevel of the neckline. The next button should be 9/10 rows lower.
The bottom button should be 8/10 rows higher than the bottom edge, the next button should be 9/10 rows higher than the previous one.
The other two buttons should be in the middle of the remaining space with 8 rows between them.
Knit the second harness for the right shelf as the first harness, making holes for the buttons on it as follows:
1st row: knit 1, purl 1, knit 2 loops together, knit 2, knit 1, purl 1, knit 1.
2nd row: knit a row to the end, knitting yarns only 1 time behind the back wall.
Jagged Border (Pico):
The teeth are tied to the lower edge of the back, shelves and sleeves.
With needles number 4, dial and knit each loop of the dial-up row. Then close these loops with a picot: * close 2 loops, return the last loop from the right knitting needle to the left knitting needle, cast on 2 loops, close 2 loops, knit 2 loops together with the front one, throw the 2nd loop on the right knitting needle onto the 1st loop; repeat from * to the end of the row.
Completion:
Do not steam. Sew shoulder seams, side seams and sleeve seams. Sew sleeves into armholes. Sew on the harnesses by joining their ends in the middle of the neckline of the back. Sew on buttons.
Front part:
Knit like a back to ***.
Change knitting needles to number 4 and knit with front stitch with panels:
1st row: 10 (12, 15, 17, 20, 22) knit stitches, knit 1st row of the panel, 14 (16, 18, 20, 22, 24) knit loops, knit 1st row of the panel, 10 (12, 15, 17, 20, 22) knit.
Row 2: Purl 10 (12, 15, 17, 20, 22), knit 2nd row of panel, 14 (16, 18, 20, 22, 24) purl, knit 2nd row of panel, 10 (12, 15, 17, 20, 22) purl.
Rows 3-28: Repeat rows 1-2 13 times, but knit rows 3-28 panels respectively.
Go to the main picture:
1st row: Knit 23 (25, 28, 30, 33, 35), 1 yarn over, knit 3 together knit, 1 yarn over. 40 (42, 44, 46, 48, 50) knit sts, 1 yarn over, knit 3 stitches together, knit 1, knit 23 (25, 28, 30, 33, 35) knit loops.
2nd row: purl loops.
These 2 rows make up the rapport of the main pattern.
Knit in the prescribed order until the knitting height reaches the height of the back to the beginning of the armhole, finish with the purl row.
Armhole shaping:
Run as for the back.
Jagged Border (Pico):
Perform as for a jacket.
Neck trim:
With 3.25 needles and stitches on, cast on and knit 66 (68, 68, 76, 78, 78) sts along the edge of the neckline, including the stitches on the spare needle.
Knit 2 rows with knit stitches.
Close the pico loops, like on a jacket.
Tie the neckline of the back in a similar way.
Armhole strapping:
Sew shoulder seams. With 3.25 needles and on the front side, cast on and knit 91 (99, 104, 112, 117, 125) sts along the edge of the armhole.
Completion:
Sew side seams. Gently steam the jacket and top.
