Knitted hood– a good alternative to a hat or beret. When winter comes, it's warm and creative model always handy.

Craftswomen crochet hoods in different versions:

as a separate product;
continuation of the neck.

A detailed description helps beginning knitters figure out how to crochet a hood without making mistakes.

Types of hoods for crochet

Among the main models it is worth highlighting:

hood;
hood;
hood

The hood, knitted as a separate product, replaces a hat or scarf. Crocheted according to the pattern with different patterns and designs. When knitting from the neck, the manufacturing principle does not change, but it is necessary to correctly connect the elements.

Hood. It differs from the classic version by the presence of long ends, reminiscent of a scarf, which are wrapped around the neck. Traditionally, the bashlyk is made in a pointed form.

Hood. Initially it was considered a women's headdress. For models, crocheted characteristic details for connecting the lower ends of the product - ribbons, fasteners, a chain of air loops.

Such hats are knitted for children and adults, modifying the shape, pattern and color combinations.

Video: Hood with a button

Knitting techniques

Let's look at a detailed master class on crocheting a hood using the example of a women's hood. Let's start with a simple pattern that a beginner can master knitting.

Hood as an independent product

To make a women's bonnet, we will need:

Hook and yarn. The tool number is selected in accordance with the thickness of the thread.
Select a pattern. Dense model It is better to tie it with columns, and for the hood-finishing they select an openwork pattern.
Take measurements. For a knitted hood, record its depth and height. An adult and a children's hood are knitted using the same measurements. Depth is the distance from the tip of the nose to the middle of the head above the back of the head. Height is measured from the base of the neck to the crown.

Cast on a chain of air loops 50-60 cm long. Continue knitting in single crochets to a height of 25 cm (30-35 rows depending on the thickness of the yarn).

The resulting rectangle is folded in half and crocheted.

Separately, knit a chain 5-6 cm long and connect the ends of the rectangular fabric with it.

The lower part of the hood is tied together with a chain of air loops using single crochets. The height of the harness is no more than 7 cm. Each new row begins with a lift of 2 air. loops

This is the basis diagram for making the hood as a separate element. To link it together with the product, a different technology will be required.

Master class on knitting from the neck

For example, let’s take the option of designing a jacket for a child. If the boy is older, then the color is chosen in calm tones, and for the baby, the threads are brighter.

We count the number of loops that make up the neck of the product.

To make a hood, there are two ways - cast on the initial row of neck loops or knit a chain of air loops in the same quantity. For a comfortable fit, we will make a lapel. This will require increases along the edges of the row and in the middle. To accurately determine the middle of the row, fold the product in half. It is enough to make additions through the row. This continues until the height of the headdress is measured.

Now the fabric is visually divided in half, and the halves are knitted separately from each other. It is important not to make a sharp angle at the back of the head. This can be avoided by closing one loop at a time on the split side. 1 stitch per row is enough.

If the hood is knitted with a pattern, then it is necessary to correctly divide the motif. When you have to sew the parts together, you should get a whole picture.

The length of the parts is equal to the depth of the headdress.

We close the loops of the last row, fold the product in half and sew.

This concludes the short lesson on knitting a hood from the neckline.

Hoods for the family

A stylish men's cardigan or sweater with a hood looks complete and extraordinary. A separate MC for knitting the element is not needed; it is done using previous technologies. For a man, you shouldn’t settle for a strict look, because for the holiday you can knit a hooded hat in an unusual version.

It won’t be difficult to choose a bonnet model for a girl. Knitting - from columns to openwork flowers. The girl will be delighted with the hood romantic style or in the form of an animal. Examples of photos for selecting models:

Models for adults and children

To replace a scarf and complete the chosen look, hoods are knitted for the whole family.

Women's openwork blouse with hood

The creativity of the model is given by:

material for knitting – ribbon yarn;
loose silhouette - suitable for girls and women;
The hood is the highlight of the summer product.

The model can be knitted in two versions. For young girls, a shortened one is recommended - the length is above the waistline, and for older women, the length is kept along the hips.

The hood is tied to the neck and is made in the same pattern as the blouse. Color and pattern are selected according to individual preference.

Bunny hood for adults and children

The technique of knitting a “hare” hood is performed in the classic version, but finished product tie on bunny ears. To design them, a ready-made diagram is used.

The wide end of the ears must be tied with thread before sewing. IN otherwise, the ears will not protrude above the headdress and will merge with it. The child will be happy if the mother wears the same model as his.

Owl model

Another original project is the “owl” hood. It will take longer to complete due to the number of parts. Shades of color are chosen so that the combination is harmonious.

The base is knitted in the traditional way, and then the details. For the owl we will need to knit the ears, eyes and beak. The parts are made separately and then sewn to the finished product. Tassels are made on the ears to make the owl's image look complete. If desired, the same tassels can be used to frame the bottom or sleeves of the product, if it is a blouse.

To reinforce the material, watch a video with detailed explanations of the technology of crocheting a hood.

Video: Hood knitting technology

Schemes for beginners

Everyone should have a warm blouse with a hood in their wardrobe, which will perfectly protect the body and head from the cold. Usually such a thing is worn in spring or autumn, when a hat is no longer needed, but gusts of wind force you to cover your head with something warm.

Decorate the neck beautifully knitted product can be done in different ways:

rubber band;
clamp;
decorative elements.

But only thanks to the hood, the product will be stylish, comfortable and practical. It can be knitted from the neck or from the top. It can also be made as an independent piece, combining a hat and scarf.

Let's consider how to knit a hood knitting needles according to the pattern from the neck.

How to knit a hood with knitting needles

In a knitted product, the front neck will always be deeper than the back neck. To prevent the hood connected from the neck from pulling up the shelf of the product, you need to try to equalize the depth of the neck. This can be done using shortened rows. For knitting, in this case, you will need knitting needles. The product can also be crocheted according to the scheme.

Knitting begins with a set of loops that need to be picked up around the neck of the sweater.
We continue the work with shortened rows: the first row after casting on the loops is knitted purl. Second row: knit 6 stitches after the placket and the knitting unfolds. Third row: purl all. The exception is the first two and last two knitting loops - this is the hood strap, which should be knitted in garter stitch. We unfold the work and knit the entire row with knit stitches. The new row begins with 2 stitches of the hood strap and 6 purl stitches. We unfold the work and knit 6 sts and a placket. The next row is completely purl.
We continue to work with shortened rows: knit a bar and 12 stitches. after the plank. We unfold the work and knit the same 12 stitches, only purlwise. loops, and at the end - a bar. The next row is all knits. On the other side of the knitting we continue to make shortened rows: we knit placket loops and 12 p. We unfold the knitting and knit 12 stitches again. and a bar. The next row is knitted completely purl.
We finish performing the shortened rows: knit the bar and 16 sts. We unroll the knitting and knit the same 16 stitches only with purl stitches, plus the loops of the strap. Next row: all knits. Next, on the other side of the hood, knit: placket and 16 sts. The work unfolds in a new row: 16 knit stitches and the bar again.
To expand the hood, you need to make increases after the first two loops of the strap and before the last two loops of the strap. Add one crossed yarn over every sixth row, starting from the first row of knitting the hood.
Knitting continues stockinette stitch, to the desired hood height.
Having reached a certain height, you need to close all the knitting loops.
Fold the knitting in half and, using a hook, connect both parts with half-stitches.
Steam the resulting product.

Having completed the work according to the description proposed above, you received a product with one seam on the head. The main thing here is to make a high-quality seam and steam it properly.

How to knit a hood in a different way- let's look at it in more detail. There is a detailed master class.

Hood knitted according to the heel principle

Beginners can also master knitting such a product, but to do this they need to try very hard and be extremely careful. It is advisable to try knitting your own socks before knitting a hood. In this way, you can understand the principle of knitting a heel, and knitting a hood, and have a good understanding of it. Let's record a detailed master class:

We put loops on the knitting needles along the edge of the neckline and knit the first row with a 1x1 elastic band.
Then we carry out the work in short rows, as in the previous case.
When performing step No. 2, do not forget to add loops to expand the hood.
Continue working with a 1x1 elastic band all the way to the back of the head.
Divide the number of loops on the knitting needles into 3 equal parts. If this cannot be done, then the extra loops that remain after dividing, and there can be no more than two of them, need to be added to the middle part of the knitting. Label the parts with markers.
Further knitting resembles the design of the heel. The loops of the side and middle parts are knitted, while the last loop of the middle part, at the end of the row, should be knitted with the first loop of the other side part.
The work unfolds and the knitting continues on the wrong side of the hood: the middle part is knitted, and its last loop is knitted together with the first loop of the side part.
The work continues in this way until all the loops on the side parts are finished, and only the middle part of the loops is in work.
Try the product on. If its depth suits you, then you can finish knitting - the loops can be closed.

This form of hood, although knitted like a sock, is shaped like a head. And this means that in bad weather the wind will not blow under such a hood - this is important.

Hood with ears

This product is knitted just as simply as the previous one, using the heel principle. The loops are cast on along the edge of the neck of the sweater, knitting begins with shortened rows. The work uses face knitting. If you wish, you can choose any other knitting, with a diagram and description.

The product is knitted with facial loops on the front side to the back of the head. The loops on the knitting needles need to be divided into 3 parts, and it would be better to use 4 knitting needles for work: three of which will have loops, and one will be working.

Further knitting resembles knitting a heel on a toe, with decreasing loops in each row. When only the middle knitting needle with loops remains in work, and there are no loops on the other two, then the knitting can be closed.

In this model, you can tie the hood with a strip of braids - it will turn out simply cute.

Ears are knitted separately and then sewn onto the finished product. To work, you need to cast on 15 stitches on the knitting needles and knit 12 rows in purl stitch. To make the curves characteristic of the ears, you need to decrease one loop twice on both sides.

You need 4 parts for the ears. The finished parts are connected in twos using a hook. The cavity between them is filled with padding polyester.

Beautiful ears are sewn to the finished bonnet, and the hood, in turn, is sewn to the jacket.

Varieties of pattern and knitting

You can use any pattern to knit a hood.. The product looks good if it is knitted in the same knitting pattern as the sweater. If you want to highlight the hood itself, you can knit it with a different pattern, or use threads of a different color or hook for knitting.

Using a hood as an example, you can knit a separate hood-hood product.

The job is the same, but it's much easier to do. After all, you don’t have to knit shortened rows, and you don’t have to pull all the knitting while working. There are only hood loops on the knitting needles and in work.

A knitted sweater can be complemented with another hood option: scarf - hood.

The threads for such a product are chosen to be wool or half-woolen, and the size of the hat is taken as the basis, only when knitting it needs to be increased so that the fabric does not fit tightly to the head.

Another option: scarf - collar or scarf - pipe

The modern name for such a knitted product is snood. It cannot be said that it is similar to a hood, but its functions are the same: to provide comfort and give warmth to the body in the cool season.

Snood– a modern and stylish wardrobe detail. If you tie wristbands to it, you get a fashionable set.

You can crochet the hood. You can find a lot of information on this issue on the Internet. In addition to the description and diagram, you can attend a master class using a crochet hook.

Conclusion

If you decide to update your wardrobe, then you definitely need to knit a model with a hood. The item will not only be warm, but also original.

Beginning knitters are often faced with the question of how to knit a hood. Firstly, this is a very convenient decorative element. Secondly, it protects from wind and cold, so it performs many functions at the same time. Also, it allows you to create a unique style and add individuality to your image. There are many models of knitted hoods that you can easily knit with your own hands. The hood not only combines practicality and comfort, but also gives the product originality. The hood can be combined with any clothing, so it is often used as a decorative element. There are several ways to knit a hood from the neck, according to the principle of the heel and hood. You can knit a snap-on hood or combine it with a snood, whatever your imagination allows. We will tell you further about how to knit a hood, what methods and techniques exist.

How to knit a hood with knitting needles: techniques with descriptions and photos

Exist different ways how to knit a hood with knitting needles. They differ in the technique of execution and the place where the knitting begins. The most common way to knit a hood is from the neckline. This method involves separately knitting the jacket, and then the hood from the collar. This is one of the most simple techniques. But there are many other methods on how to knit hoods correctly. The method of sewing on a hood is very popular, when it is knitted separately and then attached to the main product with a needle. By analogy, a snap-on model is made, which can be attached to the collar with buttons or a zipper, performing a decorative function. Very often, hoods are used in knitting for children. Which method to choose depends on the purpose for which the work is being done. For sweaters and jackets, the neck technique is better suited, and for decorative purposes - a hood or a sewn-on model. They are all easy to knit, so it will be easy for a beginner to master how to do each one.

This technique consists of making a hood from the neckline by lifting it up. First, a product is created, for example, a jacket, then using Art. s/n or st. b/n you need to dial the required amount nearby to rise up. By simply adding and subtracting loops you can control the depth and width of the product. There are several ways to knit a hood from the neck with knitting needles.

How to knit a hood from the neck with knitting needles step by step: master class method No. 1

Depending on the model, the depth of the front and back may vary. To prevent the hood from pulling down the front of the product, it is necessary to equalize the depth using a shortened one. rows. For work it is better to use circular knitting needles. We carry it out according to the scheme:

Cast on sts around neckline in circular sts;
Shortened r. knit 1 rub. purl p. 2nd r. — 6 persons. n. Expand. elm. and in volume eg purl p. up to the first 2 p. 2 first p. and 2 last. p. each r. knitting handkerchief elm to form slats. Expand elm. and in volume eg Track. R. – persons n. Expand. elm. and in volume eg and knit 6 p. p. after plan., unfold. elm. and in about. eg 6 persons. p. Next p. - purl n. Rather. elm. and knit 12 stitches after the knit stitch. p. Elm. deployment and knitting 12 p. p. in arr. eg Trust. elm. and knit R. persons n. Expand. elm. and knit 12 p. after plan. purl p. Elm. deployment and knitting 12 persons. p. in arr. eg Trust. elm. and knit R. purl n. Expand. elm. and knit 16 p. after plan. persons p. Elm. deployment and knitting 16 p. p. in arr. eg Expand elm. and knit 16 p. after plan. purl n. Expand. elm. and in volume eg and knitting 16 persons. P.
At the same time, perform increases: after the first 2 points of the plan. and before the last 2 stitches, decrease by 1 cross. Yarn over every 6th r.
Knit faces. satin stitch the entire remaining height;
In the last r. close the item;
From inside Art. crochet 2 tsp. b/n;
Wash the product, dry and steam.

You will get the simplest version of a hood from the neck, which can be applied to absolutely any product. Often this technique used for children's sweaters, but the technique is also perfect for women's jackets, cardigans and coats knitted.

How to crochet a hood from the neck step by step: master class method No. 2

This method is also performed from the neck. This scheme The simplest one is how to crochet a hood. Before starting work, knit the neckline 1st r. Art. b/n. Next, follow the scheme:

Knit 1 rub. Art. s/n from the edge of one shelf. to another. Fold the product in half and mark. center on spin. Mark.;
Knitting Art. s/n, performing 2 sk. across the river 1 tbsp. s/n together, note. Mark.;
Complete 18 p., find the middle. and put a mark;
Next, knit. 1 half to the mark, performing decreases (3 tbsp. s/n vm.);
Unfold the elm. and the first 3 tbsp. s/n knit vm. Do 6 p.;
By analogy I will connect. 2nd half;
Connect 2 floors. Art. b/n;
Tie the edge with a border according to cx. 2.

You will get a simple crochet hood that can be used for children's and adult patterns.

How to knit hoods correctly: pattern of a knitted hood based on the heel principle

The essence of this method is to use a technique similar to that used when knitting socks. This model can be part of a pullover, coat or be an independent product. Very often this technique is used to knit a scarf-hood. This is an excellent option for a hood that fits tightly to the neck and protects from the wind. This model can replace a hat. Carry out the work according to the scheme:

Dial the required number of points (about 24 points). Knit 1 rub. elastic band 1x1, then 1 p. with a “hole” pattern (alternate 2 p. vm. double crochet). These will be buttonholes. If you want to knit a hood on a jacket, then you can skip this point;
Knitting the required length with a 1x1 elastic pattern (about 43 cm). Make a row of “holes” (alternate 2 p. vm. double crochet), another 1 p. elastic bands and close the st. Step back along the lengths. Art. 3 cm each for plan. and put a mark. Between them, type along the edge of the sp. p. from braids
Knit 1 rub. faces in satin stitch with double the number of stitches. For this, knit. 1 person n, cross. Yarn over, and so on until the end. R.;
Next, knit. all stitches with 1x1 elastic band at the back of the head. Chapter. number of items for 3 equals h. If the number of sts is not divisible by 3, leave more sts in the middle. Place markers.
Knit n. lateral and middle part. Last. p. Wed. h. knit vm. from item 2nd side. h. vm. persons Expand elm.
Knitting p. Wed. h. to last p. Knit. afterbirth. p. Wed. h from 1st p. side. h. vm. persons Expand elm. Repeat until on sleep only items will not remain. h.;
Close the stitch and hide the ends of the thread.

This is a simple pattern that will definitely come in handy for beginning knitters. This creates a tight-fitting hood. To get a tighter knit, use 2 threads at the same time. Great option instead of a hat for the winter.

Snap-on hood: diagram with description and photo

This pattern is ideal for attaching a hood to a sweatshirt, raglan or coat. It can be done with a thread of a contrasting color or to match the tone of the main product. Before starting work, measure the circumference of the neck where the fastener will be. hood. This is the length you need to dial the initial chain. Further according to the scheme:

Dial the flail. from air p. (for example, 47 cm). Knitting Art. s/n. to the height of the back of the head = 10 rubles;
Divide the elm. for 3 hours (10 cm for the central part, and 17 cm for the side parts). Knitting center. h. art. s/n. = 18 cm;
Conn. cr. Art. b/n. one b. hours from center h. Similarly conn. 2nd b. h.;
According to the bottom h. knit 1 rub. Art. b/n;
Track. R. perform step for buttons. Mark the places for the fasteners with a marker and sew the buttons onto the collar of the product. Attach the hood and mark the button holes. Perform 2 air. lifting, and knitting. 2 r. Art. s/n. Close the item and fasten it to the product.

The result is a functional and practical hood that can be easily removed and attached using buttons. A very interesting solution, especially for children's knitting.

Knitting a hood step by step: master class on knitting a hood

A bonnet is a headdress that is a combination of a hat and a hood. The hood fits snugly to the face and neck, thereby protecting against cold and wind. The hood pattern can be used to create a patterned hood or to pair it with a jacket or coat. We knit a hood with knitting needles, diagrams and descriptions.

Knitting a simple hood: step-by-step master class

This is one of the most simple circuits for beginners. To complete the work, you need to cast a chain 60 cm long and tie st. b/n. =24 cm in height. Connect both halves and crochet st. b/n. Connection additional flail from air p. in length and connection. bottom ends. Knitting on the bottom part 7 r. Art. b/n. Every r. finished conn. Art. and perform 2 air. lifting point. A simple hood is ready!

Knitting a hood with ears: diagram with description and photo

Bonnet with ears - very interesting model, which can be tied by both an adult and a child. It is not difficult to do, so even novice needlewomen can safely get down to business. Density of elm. 13 p. x 20 r. On the sp. cast on 92 sts and knit. 6 rub. with an elastic band. The main pattern is stockinette stitch. After 18 p.m. close with 2 tbsp. 4 rub. x 6 p., 3 r. x 5 p. Remaining. 14 p. knitting decreases every other 5 cm, 1 p. Knitting. 2 Wed. p.vm. After 27 r. remaining Remove 10 sts with a pin and connect the medium. side detail

The ears are made separately. Connection 4 children Dial. 15 p. Knit. 12 rub. purl satin stitch To round off, decrease. from both stations 2 r. 1 p. Conn. crochet details. The ears can be stuffed with padding polyester so that they stick out. Sew to the hood.

Capor “Mysterious Stranger”: master class with photos

An interesting model that can be used as a hood or a removable hood. To work you will need circular knitting needles. Top = 90 p. 1st r. alternate k1, p1. Divide into 3 hours, 30 p. 2nd and 3rd p. K1, p1 before last 2 stitches, wrap the stitch and turn the elm. 4th and 5th r. K1, p1 before last 2. Before last obl. p. 1 persons., turn the elm. Further according to the scheme:

Knitting a sweater with a hood with knitting needles: a selection of women's patterns

Women's sweatshirts with a hood are current models that are also very practical. There are many sweater patterns that are easy to knit even for beginners. We offer a selection of models for your collection:

Yellow cropped sweater

Pink sports pullover

Warm jacket and mitts

Jacket with Irish motif

Coat with knitted hood

Cardigan jacket with hood and braid

How to knit a sweater with a hood for a child: a selection of patterns for beginners with patterns

IN children's knitting the hood is used often. Using simple techniques and patterns, you can create a cute and practical blouse for a child using knitting needles. A selection of ideas on how to knit a hood with knitting needles for children.

Knitted sweater with hood

Jacket with hood for boy

Jacket with hood for girls

Coat with a hood for a boy

Coat with a hood for girls

Men's knitted jackets with a hood: a selection of patterns with photos

Men's knitted sweaters with a hood are a popular category of clothing, especially in the cold season. A self-knitted sweater-jacket will not only keep you warm, but will also provide the opportunity to actively engage in your own business. The hood can be both a decorative and functional detail. Particularly popular are models of men's sports-type sweatshirts with a zipper. We offer a selection simple models for beginners with photos.

Raglan on the lock

Jacket with knitted sleeves and hood for men

Pullover with collar and hood

How to knit a hood with knitting needles: video master class

Every novice needlewoman has at least once encountered the question of how to knit a hood. This is a really pressing question, because with the onset of cold weather, you can’t think of anything more practical than a product. There are many variations, methods and techniques for performing it, so every craftswoman will be able to find the right one. Our patterns and master classes will be useful not only in knitting women's clothing, but also to create a practical raglan, sweater or pullover for a child. Look for more useful articles on the site and learn to knit with us! How to knit a hood video master class for beginners with a detailed description:

In contact with

There are several options for how to beautifully design the neck of a knitted product: elastic band, collar, decorative elements. And only a hood manages to combine convenience, practicality, and style to make a sweater, cardigan or dress original. Therefore, for some craftswomen, the topic is relevant: how to knit a hood from the neck with knitting needles? You can make a new thing with your own hands for the off-season period based on knitting patterns - from simple to unusual.

Methods for knitting a hood from the neck

Even for beginners, knitting this part will not be a stumbling block, since there are several options for how to knit a hood from the neckline on knitting needles. Simple stipulates that the functional part of the product must be knitted separately, in the shape of a rectangle, and then sewn on one side, and then connected to the neck. Another way is to pick up stitches along the neckline, lift them up to the desired level, bind off the knitting and sew the edges. There are other options: classic (like the heel of a sock), hood or hood-collar. Choose any method and get down to business.

Step-by-step instructions with diagrams and job descriptions

Some have just yet to master the basics, while others already have considerable experience in needlework, but for each category of craftswomen the basis of their work remains step by step instructions with diagrams. They describe in detail, step by step, the sequence of actions that will lead to the creation of a beautiful, comfortable, original thing, knitted with your own hands. The description of the work - from color, thread thickness to assembly - eliminates the possibility of errors when there is a desire to complement a knitted item with a functional detail.

Description of knitting a sweater with a hood from the neck

Along the edge of the neck of the finished assembled product from the front side, cast on the required number of loops. Using a knitting needle, fasten the working thread at the beginning of the row and make a knot.
The next 2 rows are knitted in stockinette stitch.
Continue knitting in short rows to create a classic hood. The pattern is simple: when knitting the front row, do not bring it to the end, leaving the last loop. At this point, the knitting must be turned, yarn over, then knit a purl row, and unfold again without finishing one loop. This creates two side parts that are knitted one after the other.
The side loops close when the piece reaches the desired length.
When knitting the middle part of the hood, you need to pick up the side loops and finish decorating the hood with an English elastic band.

The uniqueness of this knitted item is that it combines a scarf and a headdress that will protect your head, ears, neck from the cold wind, and your hair from precipitation. A scarf-hood will add a fashionable touch to your everyday look, but before you start needlework, it’s worth knowing a few nuances. It is better to knit such a product with a lapel so that it fits better on the face; The loops should not be too close to each other, and the loops on the hood should be added or decreased smoothly.

For the scarf-hood, choose warm threads (wool), and use the size of the hat as the base, but you will have to increase the measurement a little so that the product does not fit so closely.
Cast on the knitting needles the required number of loops, based on the calculation on the knitted sample (use a 10 x 10 square for convenience). Next, knit an elastic band 3-5 cm wide, and then a rectangle, choosing any pattern, alternating the front rows with the back rows.
When finishing the fabric, you need to divide the edge into three parts, two of which are knitted in a mirror like a scarf, and the third is closed with a safety pin.
The final stage involves assembling the parts of the hood, the seam is made with the same threads using small stitches. You can decorate the ends of the scarf without any problems; tassels, pom-poms, fringes are suitable for this - anything to make the edge look beautiful.

Women's pullover with a hood tied from the neck

In this case, the work will not be difficult, see for yourself:

First, the main parts of the product are knitted: back, front, sleeves.
Then they start tying the neckline from the front side, the loops are cast on circular knitting needles.
Knit the fabric according to the pattern, not forgetting to smoothly decrease one loop in every second and fourth row.
A few centimeters before the end, they begin to knit the elastic, and when the height of the hood reaches the desired level, the loops are closed. The fabric is folded in half and the edges are carefully sewn to complete the knitting.

How to knit a snood on your head and wristbands with knitting needles

Among knitted items, the snood represents the most original category. By appearance it resembles a scarf-collar or a scarf-pipe. A convenient accessory provides comfort and warmth in the cool season. The snood remains a stylish wardrobe detail, and together with matching wristbands, a fashionable set is created. If it is intended for winter, then the yarn should be warm, and for the off-season, acrylic or thread containing wool (20-30%) is suitable.

To work, you need to take circular knitting needles, cast on the required number of stitches, knit the first row to close the knitting.
Next, knit the fabric according to the pattern and close the last row.
The edge on both one and the other side of the snood is knitted separately. To make the top of the scarf-collar look attractive and frame the face beautifully, it needs to be slightly narrowed when tying it.
Then they proceed to the wristbands, which are knitted on stocking needles, closing them into a ring. Following the pattern, first make the right and then the left wristband for the original set.

Fashionable cardigan jacket with knitted hood

The basis of a fashionable cardigan jacket is knitted according to openwork pattern from yarn in which the wool content is from 70 to 100%:

First you need to knit the back, where, alternating the front stitch with a woven pattern, knitting the armholes and bevels, leave the required number of loops for the hood.
Next, according to the diagram, you need to knit the left, right shelves, and sleeves.
The assembly of the jacket is completed by knitting the hood circular knitting needles from the neck based on the left loops. Knit it, close the loops and sew the edges.
A completely fashionable jacket is ready when the trims are made, holes in them for buttons, and the remaining parts are sewn together.

Vest with hood for women

The vest is a well-known item from women's wardrobe, through the efforts of the craftswoman, can turn into a creative outfit for the cold season. By choosing the proposed knitting pattern, you will soon be able to show off an original new thing. This version of the sleeveless vest, knitted, worn under a jacket or can become the basis for creating a jumper, for which the needlewoman only needs to tie up the sleeves.

Take your measurements and, according to them, calculate how many stitches you need to cast on for the sleeveless vest.
Following openwork pattern, knit the back, left and right fronts, setting aside the loops for the hood.
A convenient detail is knitted with a bevel according to the pattern, with loops pulled from one part of the hood to the other.
The decorative braid is knitted separately, then sewn on, the edges of the vest are joined with a seam, and the bottom and armhole are decorated.

Men's jumper with hood from the neck

Jumper with a hood from the neck for men is created on the basis of yarn containing wool and acrylic. An openwork pattern is knitted together with the main pattern, and to create the product it is necessary to resort to special decreases. So look:

Start knitting men's jumper from the front, then make the back, followed by the left and right sleeves.
When starting to assemble, knit the hood from the neckline, before closing the loops, do not forget about the elastic band, which will give the shape of the hood, after which the edges are sewn. All that remains is to connect the other parts together so that the men's jumper is ready to wear.

Knitting a hooded sweater for a child

Warm knitted item For a child, it is a must-have wardrobe item. The hood, which protects the child from drafts, helps to make it even more necessary. An addition to a knitted item will be a guarantee of comfort, and for kids who do not like to wear hats, such models are a good find.

Knit the details of the sweater, making sure that the back neckline will become the basis for the hood.
Sew the pieces together, leaving the neck loops open.
Knitting the hood begins from the front side; traditionally, garter stitch is used for the fabric.
As you work, you need to periodically add loops along the outer edge. Tie to the desired height, close the loops, sew the edges of the finished hood.

I’ll try to explain how I knit hoods.

I cast on the required number of loops around the perimeter of the neck,I knit 1-2 rows completely, then shortened rows:first one half of the front neckline,then I move along the back neckline to the second part of the frontand again I knit shortened rows

You can see shortened rows

then I just knit an even fabric

This is what shortened rows look like - side view (marked in green)

Sometimes I knit decorative rows of 2-3 stitches in garter stitch,The width between the decor stripes is equal to 2/3 of the loops cast on at the back neck. I hope I wrote it clearly

Sometimes I make increments occipital part(very rarely).
Next I knit to the desired length. I close the loops of the side parts of the hood, leave the middle ones open, you can not close them, but pick them up as you go, but I like them better with closed loops.

When the hood is ready, I tie it with an elastic band or some other strip.

Sometimes I knit a hood on topI knit a rectangle of the required length and width. Then I pick up the loops on the sides

Then I knit the desired length of the hood, in the lower part I knit in short rows

I'm sewing on the hood. I'm doing the tying.

http://www.magiya.com.ua/master_class/mk_spokes/288.html

"Sew-on" strip

then I stick the hook under the edge loop of the main fabric,I pick it up removed loop strip and stretch it under the edge loop of the main fabric.
I put the loop back on the needle. This results in a connection between the plank and the product.

I unfold the fabric and knit a purl row.

I knit the first and last edges.

Wrong side

Face

Short rows

Short rows are used:
- when you need one side of the product to be longer than the other;
- or when you need to make the length of a product the same when connecting two patterns knitted fabric, giving different heights;
- when knitting horizontal darts;
- when knitting a round neckline;
- when lowering the armhole to obtain a smooth line along the edge of the fabric.

When knitting in short rows, each next row is shorter than the previous one.

The pattern is knitted in stockinette stitch with 40 stitches.

Without knitting 10 loops to the end, let’s turn the work to the other side.

In the next front row we do not knit 5 stitches to the yarn over,Let's turn the work to the other side.

Yarn over and transfer the outermost loop from the left needle to the right one.

We knit the row in the opposite direction.

In this way we knit as many short rows as you need.

The number of loops in shortened rows may vary. And also shortened rows can be knitted on both sides (on the wrong side and on the front side of the product). It all depends on what you are knitting and what result you want to achieve.
In this example, I knitted 4 such rows.

Let's now move on to the general row.Those. We knit all the loops in one row. We knit the yarn overs together with the subsequent loop (with the loop that goes after the yarn over).