I present my author's master class - a balloon with a basket with your own hands. Such a composition will be an excellent room decoration, or it can be given to someone in memory. I will tell step by step, how to make it, and the ladies have several ideas on the design of such crafts from the existing girlfriend. We will need any flowers from corrugated paper, artificial greens, ribbon, penplex, wire, decor and simple air ball. Many of my MK can find on this site.
How to make a balloon from threads?
1. Inflate the ball.
2. Prepare a solution for threads: we take 50 ml of water and we are dragging 3 teaspoons of sugar in it, add plow glue - the more, the better.
3. And begin to wind our ball threads across the area in chaotic order.
Of the fasteners, cut out the workpiece of such a form.
Tearing a thin ribbon and make a bow.
In three places with the help of a wire we connect the ball from the glued thread and the basket of the fastener. Decorating flowers and greens.
Our decorative balloon with a basket is ready!
How to make a real balloon from papier-mache with your own hands so that he can then fly? What will take for such a craft, how much is the process? In reality, most of the products such a plan do not require long time and special knowledge.
Thanks detailed master class Any newcomer will cope. But the finished handicraft will damage all others. You can make bright multicolored balls, provide them with baskets or paint to get laughing faces. Whatever, only your fantasy limits you.
To make a pier-mache ball on an inflatable ball, the following materials will be required:
- stack of unnecessary newspapers;
- liquid holter;
- ordinary rubber ball;
- several brushes.
Detailed instructions:
- Prepare Clauster, collecting it in some unnecessary container of decent sizes.
- Brush the newspaper sheets on the 2.5 cm band. Each width.
- Inflate the ball, looking so that he does not exceed the dimensions of the dimensions of the finished craft.
- Carefully cross the finished ball with paper stripes, pre-dipped in the honesty.
- IMPORTANT: Watering paper, immediately remove all excess fluid, having done with your fingers. It should be done in advance before sticking.
- By gluing strips, diligently paint the fingers of the folds. It is more convenient to do it with a tassel. Act step by step, then the toy ball will work out beautiful and smooth.
- Having finished, leave the product to dry. Now carefully pour the ball inside the newspaper strips and remove it through the small left hole at the bottom (it must be left in advance, even before sticking the newspaper).
If the ball is needed white, just paint the dried preparation of paint the desired color.
Globe or Moon from Papier Masha
How to make a ball - Planet from Paper Masha? I want to create something special. For example, the planet Earth or the moon. Here the basic principle of the manufacture of a ball will remain unchanged.
Step-by-step instruction:
- Make a newspaper ball, trying to work out if possible smooth (without folds) and medium sizes. Inflate the usual rubber ball, then styardly plunder with a newspaper strips in glue. Wait until the product dry, then blow the ball. The preparatory part is completed.
- Now for example you will need a real globe. It is more convenient than flat pictures. In order for the earth's ball to look the most plausible, it is necessary to redraw the outlines of the continents, the individual islands and the oceans of the Earth on the finished paper ball. To do this, arche with acrylic paints.
- Is it convenient to paint the newspaper or it is worth additionally placing a ball from above with white paper? You can first paint with white paint and then apply the outlines of the Earth. Or poison paper A4, cutting it also, stripes. The technology seems more difficult, but in practice everything is coped, even newcomers.
In this way, you can create any planet from the solar system and hang later together by creating a composition. It is important to observe the size, remembering that Jupiter is big, Mars small, and the Earth is average.
Balloon with basket - master class
Here you can choose the technique of manufacture.
Option number 1. Beautiful ball. If you want to create a cradle quickly, then look a beautiful colored ball with small sizes. Preferably round in shape. We glow to it from a dense thread or take a ready-made grid. See that the ball is calmly placed inside, and the edges of the grid remained free. Carefully cut, if necessary.
Creating a basket. You can cut it from a conventional plastic cup and shock outside. Or glue from a sheet of cardboard. If there is a finished basket even better. Tie it using the free ends of the thread to the ball. Ready.
Option 2. Volumetric balloon with a basket of fabric. Great New Year's surprise, who can make a child if you prompt.
Required:
- unnecessary newspapers;
- normal rubber ball;
- divorced Clauster;
- brush;
- segments of multi-colored fabric (preferably one type);
- cardboard;
- motion rope or braid.
Phased instructions:
Such a papier-mache air ball will turn out to be beautiful, large and it can be suspended to the ceiling.
- Making a paper (newspaper) ball. Following the instructions described above, inflate the ball, then consistently puncture it with thin newsstands, dipping them to the holter. Do not stick the space below, around the tail. Leave holes.
- While the workpiece dries, you can make a basket. To do this, take the cardboard and step by step glider a basket of small sizes, focusing on the ball.
- Gently do 4 small identical holes at the top of the finished basket. See so that they are symmetrical.
- Decoupage ball. He dried, now blow and remove the rubber base (inflated ball). Place it with strips of fabric / colored paper (which is preferable). Top neatly do 2 holes, placing them close. Bowl Papier Masha ready.
- Measure 2 pieces of rope. You take one, the tip merchants through one of those holes at the top of the ball, then pull it out through the second. Center so that you hung two identical ends down. Tie them by fixing in two opposite holes located in a basket. Also enclose with the second remaining rope. Take the ends alternately to two of the four holes (see picture).
- At the top of the children's toy can be made additionally a loop, through which it can be suspended later to the ceiling.
Complete the work of a small doll or a little man with "Lego", ready to fly.
Balloon - Smesharik from Papier Masha
Made easily. To create a pretty mixing, you will need:
- paint;
- several brushes;
- cardboard sheet;
- scissors;
- ready picture.
First of all, you need to make the usual paper ball.Pluging with newspaper stripes. Then, how it will dry, decorate the product, painting it as a mixture. Draw a smiling muzzle in front, and the missing parts like ears, hands and legs, attach separately.
Cut them from a sheet of cardboard or "blind" using a napkin moistened in glue. Some take plasticine. Paper ball Tight enough, so you can fix a variety of details without fear of its destruction.
Balloons are different: a flying balloon with a basket, rubber balloons, inflated helium or ordinary air, crafts in the form of balloons, etc. Today we will tell and show you how to make balloons in step by step lesson do it yourself.
Create your own hands balloons with a basket
Balloons with a basket were invented by humanity a long time ago and were used to move through the air. Now is the fascinating entertainment, suitable for both families with family and a romantic journey or excursion. Make a huge air balloon for flights almost impossible, but a small balloon for starting can be thought out.
The air balloon consists of a dome that is sewn from durable nylon materials, on the reverse side, the ball is covered with an airtight material. An inflation hole is stitched with a cloth resistant to high temperatures.
For the manufacture of a basket used vine and marine plywood, resistant to humidity. For the frame apply stainless steel cables and protect them with leather covers. The basket also attacks the accessories for a balloon.
Burners serve to incandes air and maintain the temperature in the dome. Fuel - liquefied propane.
For the manufacture of a decorative balloon, we will need: dense paper, fine cigarette paper, twine, glue, threads, and a triangle, long line, scissors, glue and pencil brushes.
The amount of materials depend on the ball size:
In order to make a ball with a diameter of 2 meters, you will need 16 strips of paper.
- To begin with drawing pattern on dense paper or cardboard, according to the above scheme. One template will be enough;
- Billets for segments are made from cigarette paper, which, with a lack of magnitude, can be glued together;
- While the segments are glued, cut out the blanks from the cardboard;
- Cardboard pattern apply to cigarette paper and cut out 16 segments, taking into account allowances for gluing one centimeter size;
- Cut segments first glue in pairs, forming a "boat", then glue the "boats", except for the last seam;
- Turn the shell and only then glue the last seam;
- Next, you need to close the base of the ball with two rectangular tight-paper stripes, which must be inserted into the twine, which will hold the ball when heated;
- To the top of the dome, so that the gaps remained, the circle is glued from the same material as the dome itself;
- After drying, the dome is painted by heating by a soldering lamp;
- We divor the fire, keep the ball over the twine.
When the air in the ball has a heated, the ball is ready for launch. Enough.
Very beautiful seeing crafts in the form of balloons. They can be made of paper, felt and even light bulbs.
We present you the master class on the manufacture of such decorations.
Balloon from the light bulb.We often throw away blinking lamps, but we do it in vain, as you can make stunning crafts.
Now we will tell how to make balloons from the light bulbs.
- Blinking lights;
- Paints for windows on glass;
- Screw materials for basket;
- Threads.
First of all, the light bulb needs to be deguted, so that the paint fell uniformly. Covered light bulb background. While it cools, you can make a basket. From paper, from traffic jams - what is your fantasy ready for what is ready. We glue the cable-threads of the size you need. When the dry background of our bowl, you need to draw parts. Connect the basket with a bowl. From above on superclauses or hot glue, you can make a loop to hang the ball.
Such balloons can also be made by knitting, stained glass windows and different other remedies:
Details of the manufacture of such crafts can be viewed in the video tutorial at the end of the article.
Fetra balloon.From the felt sew a balloon simply enough, and it looks very pretty and colorfully.
To do this, we need pieces of felt, pattern, cardboard for a template, thread and cardboard for a basket and, of course, sewing tools.
To begin with, we cut eight wedges according to the template, taking into account the allowance and one circle. Here is a template for three different sizes:
Balloon from felt ready.
Balloons confidently entered our lives. They decorate weddings and other holidays, they give them, with the help of their hands and heart offers.
The original way to congratulate a person is pretty simple. We will need a large box, wrapping paper, balls, inflated helium. It is advisable to have a gift at the bottom of the box. There is such a surprise shortly before the presentation. A certain number of balls is inflated and closed in a box. When the box opens - the balls take off!
Balloons can be made with their own hands for both launch and decor of premises in everyday life or for holidays.
Video on the topic
We offer you to familiarize yourself with the selection of video tutorials on the creation of balloons quickly and easily with your own hands:
Own balloon is a children's dream of many. Today it may not only be purchased, but also to do it yourself. How? Read more!
Buy balloon
Today, several shops both abroad and in Russia offer to buy balloons, shells for them. New thermal aerostats (thermal balloons) of Russian production cost about 700 thousand rubles with all necessary components - shell, basket, burner, fan, air intake, etc. Most of the price accounts for the shell - 300-400 thousand rubles. The cost of the Czech Prevention Basket begins from 30 thousand dollars, England - from 40 thousand euros.
Used aerostats can be purchased from 400-500 thousand rubles for a complete set. In addition to the value of the device itself, the owner of the balloon will have to spend on:
- gas consumption;
- registration and certification in Rosaviation;
- annual extension of the certificate indicative of airworthiness;
- pilot remuneration (perhaps and on his training);
- remuneration by the ground service brigade, etc.
Balloon with a basket do it yourself: dome
If you decide to construct your own balloon, first of all you should do the dome. For him, it is necessary to purchase a robust nylon - polyester or polyamide. It is important that the material does not pass the air - cover the fabric from a rolombatic side with liquid polyurethane or silicone.
The next stage of nylon is cut into segments of the desired size, which are sewn particularly durable threads. A hole for an air balloon with a basket with their own hands, we are trimmed with a protective layer of material, resistant to high temperatures.
In order for the dome to be more durable, it is additionally shed vertically and horizontally tissue tapes. Fix them on the top of the dome, and the lower edges of the tapes are attached to the casket-suspension basket.
How to make a balloon: basket
Traditionally, the basket walls weave from the grape vines, and the bottom is made from the so-called sea plywood, which is resistant to temperature differences and other extreme moments. The frame is steel cables made of stainless material. They basket attached to Dome. On cables are put on special leather coversleaving them from damage.
It is also necessary to construct special suspensions, where baggage and accessories for aeronautics will be stored.
Important element: burner
Before making a balloon, you need to carefully think over the burner design. Fuel for it is currently liquefied propane. The average power of the device is 4.5-6.0 thousand megawatts. It is necessary to acquire special burners for balloons, which are made of durable stainless steel according to a special technology that allows the device to withstand large temperature differences.
Own balloon: instruction
Passenger aerostat at home, of course, make it difficult, but to make a test paper balloon with a basket with your own hands it is very possible. You will need:
- dense paper;
- thin paper (the so-called cigarette);
- glue;
- threads;
- twine;
- scissors;
- pencil;
- long line;
- triangle.
Now for work:
- From the diameter of your ball will depend on the number and size of cut strips. If it is 1.5 m, then you need 12 bands, 2 m - 16, 2.5 m - 20, 3 m - 24.
- To draw a smooth pattern, first spend a vertical line on paper equal to the length of the future strip. Through it, some perpendicular segments, equal to the width of the segment at some distance. The end points of the segments are connected by a smooth line, which will be the loop loop.
- In the carton template, circle and cut out the contours of the segments on the tissue paper. It is most convenient to put on each other several of its layers, forming a pack, and cut out several segments.
- Segments first glued together with "boats". Then already these "boats" need to be glued one to the other. Before taking the last seam, remove the design so that it has the shape of the ball.
- The base of the bowl is bonded by the glittered strips of paper with the twine - this design will hold the ball when heated.
- The top of the dome swipe the circle from the same tissue paper.
- After the glue dries, straighten the dome, holding it above the soldering lamp.
- To the design on the same twenter you can attach a basket for special cargo.
To start the ball, turn on the burner or raise the bonfire, hold your ball over the heat source, without releasing the Bacchow from the hands. As soon as the air inside your homemade aeronautic drug is heated, it can be released in flight.
So a balloon with a basket with your own hands can be done at home. But Passenger Aerostats is possible only to buy or rent.
The ball is a geometric body. His description: - "The set of points of space from the center at a distance is not more than specified. Get a ball with the rotation of the semicircle, or the circle around its diameter. But, such is the scientific scheme. We will consider practical. We will make balls of all kinds, destinations and sizes. So, let's begin.
Manufacture aerial ball
At home, it is easier to make samples that Michael Faradays did. It is known, as well as the discoverer of the law of electromagnetic induction. However, the scholar's balloons came up before, in 1924. As a material, the Englishman used in sheets.
Two of them were superimposed on each other and glued along the perimeter. In order not to stick between the formations between the formation, their exhaust was missed by flour. Naturally, the modules in the form of circles were cut.
In the 21st century to the question " how to make a balloon»They answer otherwise. Modern versions Make out latex. The first option was created by Niel Tiloton. Under hand, the man turned out to be liquid latex and cardboard. From the last inventor undertook to cut the cat's head.
Then, for the sake of fun, looked at Latex layout. That quickly froze. Tiloton removed the ball with a cardboard and realized that Michael Faraei's models were taught. In the factory setting, dwarves serve, of course, not cartons. Let's see the plot of industrial production.
Remember the children's dream fly away at the balloons? So, scientists calculated how many inflated latex forms will be required for this. Before, how to make a balloon with your own hands, find out your weight. Now, calculate the number of balls from the calculation, which one raises no more than 10 grams.
We are talking about standard samples, inflated helium. Balls can be greater and less. Therefore, their carrying capacity is better to find out the experimental way. It is better to be restrained and take a little more elements for your aircraft.
While someone takes off on the balls of the wind, others, they are ground objects. Masters are known how to make a digit from the balls, how to make a figure from the balls and how to make an arc from the balls. The latter, for example, can be used at the marriage ceremony.
In the same place, inflatable garlands can be useful. As a rule, they decorate banquet halls. Especially like children. Therefore, a rare birthday, a teenager is without the invention of Tillestsons. The most popular square garlands. They will learn them.
In addition to volumetric, there are flat models. How to make a garland from the balls, Everyone decides himself. Possible, for example, options from modules. In this case, individual elements are formed. Let it be flowers about four petals. Herein they do not bind, but are attached at a distance of the fishing line, or satin ribbon. If you surround the core of the Buds Mishur, it will turn out to be excellent for the new year.
Some garlands with flowers from the balls. They can be fixed on top of the main design, or to be its modules. But, buds are valuable and by themselves. This is an excellent alternative to live plants. Instead of the oha of daisies, you can give, for example, a bouquet of balls. How to make flowers from balls See next video.
The only minus from the balls is their briefness. It is not even that product elements can burst. The catch is to helium. If the balls are filled with them, after a few days they are blown away. At the same time, no external damage is needed. The fact is that gas molecules are less than the distance between the strained latex molecules.
Gelium little girl leaks into an external environment. By the way, consider it, and going to the flight on balloons. 11-inch will lose volatility in 12-18 hours. If you plan a longer journey, it is better to choose a greater caliber balls, or a standard aircraft. About its creation and talk.
Production of a balloon
Make such an aircraft very troublesome. First, the scale of the product is impressive. Secondly, it consists of diverse elements - the ball itself, baskets, cables, burners. Thirdly, government standards require the manufacture of only quality and safe aggregates. For the use of each of them a special permission is obtained. All wisdom of the process will tell the following video "How to make a balloon".
How to make a ballunderstandably. It is also clear that it is better to use the industrial version, to order a product of professionals. The Spanish company Zero2Infinity makes even space balloons. The form they are familiar. True, instead of a basket, a rounded module with portholes is attached. Passengers are placed in it. They feel a sense of weightlessness, admire the landscapes of the Earth from a distance of hundreds of kilometers.
Making a ball of threads
How to make a ball from threads? It is formed on the basis of a conventional balloon. His form, later, repeat the wrapped around, the twine, ribbons, yarn. Usually, the threads are applied manually. But the industry does not stand still. A couple of years ago came up with a device for more uniform winding yarn. It, as a rule, acquire those who expanded their passion to business. We will show the standard version. So, - video "How to make a ball".
Balls made of threads are used not only as decorations, but also find them practical application. So, artificial, or dried plants can be put in the product. Some balls become lampshades. There are those that decorate the Christmas trees.
Making a paper bowl
How to make a ball of paper with your own hands? Several options. Slices of sheets, like threads, can be placed latex forms. You can fold the origami figure. Japanese equipment allows you to get a spherical shape without using scissors, glue, a ruler. But we will show how to make a paper ballusing stationery sets different colors, stapler and glue. So, proceed.
If desired, you can refine the product. For example, instead of colored can use newspaper, or music sheets, without changing the schemes " how to do" On the photo ballappeals in another embodiment, with an enlarged number of cells. Such toys are even sold in stores.
Here are the real balls. But how to count virtual. They cut down, for example, in the Micraft computer game. Here, the object is instead of a fire, grown twicear longer, and after, disappearing from the inventory. How to make a ball in minecraft Interested in and to put it in a distributor.
In this case, the incendiary projectile is obtained. The subject and as an asterisk for the formation of a large ball. To get 3 of its modules, you need 1 gunpowder, 1 coal and 1 powder. Powder, as a rule, fell out of killed cries. Behind the powder go to hell.
Coal is not a deficit. So, for each balloons. Someone thinks how to make a bell from the ballsput it in the vase, and someone - how to kill with the help of the spheres of demons.
