Huge popularity in the world of needlework gained Rainbow Loom gum. They especially loved children. From rainbow gum, you can weave anything: decorations, key rings, clothes for dolls and even phone covers. Enough to buy necessary materials, Choose a suitable video, master several techniques and weaving from small and bright gums on a special hook for work will be a completely easy occupation for beginners!
Of course, if you first try yourself in this kind of needlework, you do not want to spend money on special machines, slingshots and other tools. Fortunately, we can weigh the beautiful figures without them. Therefore, this article contains weaving lessons from rubber on hook.
We study a detailed weaving from elastic bands for beginners
We try to make a rainbow bracelet as a decoration for every day.
Among children and adolescents, bright bracelets made of silicone rubber bands became very popular.
To weave such a bracelet, you will need:
- Metal or plastic hook;
- gum all rainbow colors;
- S-shaped clip.
This is a basic set of materials that can be found at any needlework store, and it will be not expensive.
We begin weaving. Take a yellow gum, we will be squeezing in the middle and put one part of the clips on it.
We put the rubber band on the hook, selling it to the tip first into one hole, and then to another. Clip must be located in the middle and hang out freely.
We put on the hook 2 green gum and have them at its end.
Green gum stretch with your finger, so that they catch the hook and remove yellow rubber bands on them.
We put on green rubber bands on the hook, as in the photo.
Now we put 2 blue gum and do the same with them as with green.
We repeat the same actions with elastic bands of all colors until we get a bracelet needed long.
In our case, the latter was used blue. Therefore, we take 1 purple gum and put it on the hook.
We stretch this gum down and remove the blue on it. Then we put on the purple on the hook. After that, I wake a loop in the free end of the clips.
Ready! We got a beautiful bracelet without machine and slingshot.
Create a stylish bracelet "Scandal" from rubberry
Materials:
- hook;
- elastic bands of two colors: orange (40 pcs) and black (32 pieces);
- S-shaped clip.
Weeping the bracelet first the same way as in the paragraphs 1-5 of the master class about the rainbow bracelet.
Now on the hook we have 4 hinges, from which you need to remove the left left.
Take a black gum, put it on the hook, stretch and shifted through it the first orange loop from the hook.
We hold the rubber band with your fingers as shown in the picture.
Then you wear an orange gum on the hook, which we shot from the hook, and then black.
Holding your fingers all the loops so that the bracelet does not blush, remove them completely from the hook. Then we enter the hook on the other side.
We put on a black gum on the hook and remove the first 3 gums on it.
And we put on the hook, the black gum remaining in your hands.
We put on the hook two orange gum and sell them through all the loops. After that, we enter the hook into the orange loops remaining in your hands.
We continue to weave according to this scheme until you want the length you need.
We disassemble the master class on weaving volumetric owls
Thanks to the increasing popularity of Rainbow Loom, a new direction in the needlework - Lumigurumi was included. This is weaving various figures from rainbow gum. You can weave as small flat figures and large volumetric toys.
We suggest you try to absorb the bulk owl. Make it quite under the power and state.
To create such an owl, you need:
- 500 elastic bands or 250 elastic bands of two colors, if you want your owl to be a two-color
- 13 white and 8 black rubber bands - for eyes
- 9 orange rubber bands - for beak
- material for stuffing toys
- hook
It is time to replace your old silicone case on the phone to the original case made of Rainbow Loom rubber. To create such a cover you will need more time than for bracelet or key fob. But this may be a case with an interesting pattern, monophonic or multicolored, strip or rhombick. In general, what you want.
You can create accessories for phones using a hook. To do this, you will need a knitting hook and elastic bands (about 110 of the same color and 330 other) so as not to be mistaken with the size you can measure your mobile or weigh the chain, circle it around the phone and leave the required length connecting the edges.
How to weave the phone case, look in video lessons.
Video lessons on the subject of the article
But the selection of video about weaving the case for the phone and all kinds of bracelets. Pleasant learning!
Rubber for weaving have gained great fame. They are most in demand among the younger generation. You can link different phenoshes from rubber bands on a special machine, or slingshot, with a hook. The advantage of such sets is in their practicality, you can make any item, at least a small toy or some key chain in the form of a deer, at least weave a whole backpack. To make a figurine from the rubberry enough, study a pair simple ways Weaving and acquire the necessary materials. Weaving - light and interesting occupation. Silicone handles bracelets become well known among the younger generation. A scheme for weaving bracelet on a slingshot is very popular - an arrow of love. You can make such bracelets with pairs to wear together.
For bracelet weaving, it is necessary:
- plastic hook;
- multicolored gums;
- S-shaped clip.
Such materials can be purchased absolutely in each store for embroidery, the advantage of such a bracelet will be lowWhat is important for a beginner.
First step to start - choose colors Of which we will weave the bracelet, for example, green and blue. We connect the gum in the center and tensioning on the clip. In the first passing first in one pass, and after another. The clip is obliged to be in the middle and with the easiest to swing.
After that, take two elastic bands of blue and stretch them on the hook by placing them at the end. The same gossip from other colors, continuing to weave the bracelet the length you need. To finish the bracelet you need to wear last elastic band purple color On the hook, stretch below and remove the rubber band. Now you need to turn purple through bends to a free clip. Decoration for your hand is ready.
Unusual scheme "Scandal"
We are wearing a bracelet called "Scandal". It is necessary to create it:
- hook;
- rubber two colors in a ratio of 40 to 32 (for example, red and blue);
- S-shaped clip.
This set differs from the standard only with the obligation to use exactly two colors.
Initially, we repeat the same 5 stages as in the scheme of our first bracelet. When we have four bends left, you need to remove the extreme on the left. We prolong down a green gum, stretching the yellow rings through it. Fix the product with hand. Now we stretch back the yellow elastic band (which we shot from the hook) and only then green. Holding a hand loop to make the bracelet, removing them from the hook.
Introduce the hook from the reverse side. Wearing green on the hook we remove the first 3 gum. We stretch the remaining green gum. Supporting the hand of the loop, so that the bracelet is not unleashed, we remove them all. After that, we set the hook from the reverse side. We join the black rubber on the hook and remove the first 3 ring from it. We stretch the remaining black gum. Now it remains only to wear two yellow and turn through the loop, introducing a hook to the remaining yellow loops. For this principle wept the necessary length.
And also there is knitting through the so-called magic Ring . This species implies knitting through rings, initially the circle is 6 loops. To start knitting need to unscrew the ring 3 times. After that, you should hurt the end of the hook of the gum, and to hold the opposite side with your hand. Then we rearrange the wound elastic over the second stretched elastic band. The point is held by the hand, you need to put on the hook, in the end 2 loops appear. An extreme left gum should be carried out through the right, forming a bundle.
We carry the hook from which they screwed at the beginning of knitting, in the loop. Insert the second gum as like last time. Under the rest, stretch the most extreme left gum. It turns out the first loop of the rings. We repeat this procedure until 6 loops come out. It is necessary to pay attention to that in any case 1 loop should remain on the hook, re-need to wear a clip. So we can understand that the series is over. This is the ring, you can combine, reduce or increase the dimensions. Everything rests on your fantasy.
Weep the phone case
An unusual and bright case, color depends only on you, want to weave the stars? No problem! For such a cover, we need approximately 900 rubber different colors. For comfortable knitting follows provide yourself with a schemeYou can draw at least any paper format. This will help not get confused in such a volume.
So, knitting will be built on the so-called chain. The link is 1-2 cm, immediately calculate the size of the phone, to accurately calculate the number of rubber bands. The construction of the chain starts with an embedding on the hook of the first gum, fresh eight. The subsequent element passes through double loop, getting four loops. The extreme loops pass through new gum throughout the process, returning each time. It was the entire algorithm of knitting. The process is long and heavy, but the result will delight you every day.
What useful weaving?
Improving knitting skills, you can not only please yourself and surrounding toys and figures that just do. Perhaps you will have a unique opportunity to make money on weaving, selling more and more complex and practical products. Good luck in your work!
Essay the stages of the bracelet "Scandal" will help the lessons in the learning video.
Case made of rubber on the phone - the product that every little girl dreams. You will agree, this beautiful, interesting, and most importantly, a completely unique accessory will not remain unnoticed among people. Before the start of creating this cute accessory, it is worth learn some subtleties of weaving.
Subtleties of work
Case - the thing, of course, is great. But how to absorb the case for the phone from the rubber in such a way that he would come in a little princess? In fact, there is almost nothing complicated and unusual in this - for this purpose, any child will cope, if he, of course, is not quite small.
Learning to make covers on the phone is not at all difficult, here the most important thing is to have a desire and skills. Couple useful recommendations - And a delightful unusual accessory in your pocket.
Main inventory
Remember that for such an important thing as weaving, first of all, you need to stock up with tremendous patience. After all, this will require a lot of time - the result of labor will not appear immediately. After all, we will weave the product from the rubber band - the occupation is quite painstaking. What will be required for work:
Methods of weaving Czech
Weaving from rubber, telephone case. There are completely different methods of weaving rubber bands from Rainbow Looms - everything depends on the type of crafts and skills (also age) of the manufacturer. But if you want to make a case, then there are only two simple and interesting method of weaving:
Work on the machine
Many think about how to rinse from the rubber case for the phone on the machine. Having a set of materials, a machine and a little strength, you can create a unique thing. This thing to make on the machine is not difficult at all. On the columns of the machine (upper and lower row) is put on each in one eight.
The main goal is to ensure that crossings that have taken the entire perimeter of the instrument come out at the exit.
Stages of work:
The first lower column and the second top will fly away the first iris. The next, clings to the second lower peg and throws onto the first top. Then everything is simple - not twisted gums wear on suitable pairs of pegs in the bottom row.
The same is done for the top row. Using the hook, the lower rumbers are tightened to the center. Then all manipulations are repeated in accordance with the selected product length. Remember the technical holes - they are executed only with the help of skips.
To complete the work, all the loops are removed on the first row - and then on the iris, which is trapped. This is a completely general scheme, if you want it can always be improved by some kind of personal preferences - for example, to apply different variants of the color of gum, weave patterns and ornaments, you can even create letters in a word, to apply everything that your imagination will allow you without restrictions.
Crochet Phone Case
Of course, at first, it may seem to see what the case on the phone or the tablet from the rubber bands with the help of the hook is much more complicated and longer. In fact, it is not at all - both and the other method have their pros and cons.
To work a crochet, you need to get to the instrument of labor - crochet. Then everything is simple - weaving passes the "chain" method.
At the same time, remember that the chain link has about 1 cm, so it is quite easy to calculate, which length of the thing you need, and how much the amount of rubber band is needed. First you need to take the first elastic band, turn it over eight and put on the hook - this is how the first loop will turn out.
Next, you need to take the following item and turn through a double loop - there are already four loops. Extreme two hinges are always stretched through new iris and return back to the hook. Thus, we will have a whole case - beautiful and interesting. If you make such a product a couple of times, then everything will start to get automatically.
ATTENTION, only today!
Evgenia Smirnova
Send light in the depth of the human heart - here is the appointment of the artist
Content
Rainbow Looms Rainbow Looms Weaves Recently is becoming increasingly popular. For the first time, these materials for the needlework were greatly distributed in 2014, after that, almost every child, who likes to work with his hands, wants to know how to weave bracelets from rubber. There are many ways to make stylish baubles, as well as hundreds of weaving schemes.
From the simplest, however, it will cope even beginner, to complex, requiring experience. Below are several photos and video councils on creating beautiful, bright children's bracelets.
Instructions and schemes for weaving bracelets from rubber bands with step-by-step photos
Methods of weaving with the help of rubber bands were known for a long time, but a big push of this direction of needlework gave the invention of a special machine by American by American Chin Chong, who wanted to surprise her daughters. Over time, this product has spread across school institutions, and the creation of bracelets fascinated children: Benches became peculiar symbols of friendship. What is necessary:
- The machine is wonderful for a child with large fingers, allows you to participate in the process of creating jewelry even an adult, weave with it easily and pleasant.
- For those who have no machine, invented many other ways, how to weave bracelets from rubber: using a plug, plastic slingshot, only with a hook or on the fingers. And although a special device greatly simplifies the process of weaving, baubles, made with the help of other devices, look no worse. With the acquisition of experience, children learn to create bracelets from hearts, decorated with flowers, robes, stars, bows. Decorative elements Made by strict scheme using a thin hook.
- Elasmen are used as the main material, although, if desired, children can complement bracelets by beads, ribbons, other details. You can buy them in special multi-colored sets for weaving from rubber or rubber rings of the same color in the bag separately.
Thanks to this type of needlework, the child learns to better manage his body, develops small motor. Weaving bracelets contributes to improved concentration, as a result - better trainee. Several master classes with photos will help each wishes to weigh an interesting feathers in different ways.
On a rainbow machine
- To start, take the first gum of the desired color. The shades of the material may be somewhat, it is desirable to start with three. They will have to alternate. First, put on the first silicone ring on two columns: the middle and post next to it on the left side.
- Take the elastic band of another color, put it on the extreme left column, where there is one loop, stretch it to the middle column, as shown in the picture. Gum should be a zigzag on the machine.
- Continue similarly to place materials for the bracelet, alternating the colors that you like.
- Turn the machine so that the shooter is directed to you. So, during the time the bracelet will be placed, it will be easier to pick up rubber rings.
- Next work with a pillar that is closest to you. With the help of the hook, pick up that gum from the middle row, which is below. Take it from above, by changing places from the next loop.
- Put the removed elastic band on the next row, connecting the eight. Repeat similar actions with all the lower rubber rings. Weaving while working with the machine should leave left, regardless of how you turn the tool to yourself.
- Board beginners: If you fail to work with a hook for the first time, do not despair, this technique requires some skill. Over time, the creation of the bracelet will be much faster and more pleasant. As a result, you should have two rows with color circles, as shown in the photo.
- To be able to wear a bracelet, attach to the future decoration special S-shaped fasteners from two sides. They can go bundled with a set of gum or purchased separately.
- Crochet Carefully remove all the loops from the machine columns.
- Connect with clips two end of the bracelet. Simple and beautiful feathers ready! Based on this technique, you can create original, more complex weaving.
On forks
The plug is a device that is found in everyone's house. With it, you can create a beautiful, unusual decoration. Place 3 rubber bands on its teeth as follows:
- Tension the first to 3 teeth on the left, then twist eight, put on the 3 right teeth. On the two middle columns, the loops will intersect.
- The second put on 4 teeth, and stretch the back to 2 medium.
- The third one is similar to the previous step. See how such a weaving happened in the photo:
- Take the hook. Hold them first the left loop of the lower gum, remove from the fork and the grove between the two medium rows. In the same way, do with the second loop.
- Next, put on the rubber ring in the same way as you did in the first step on last stage: Place it on four teeth, stretch the back to two middle. With the help of a hook, keep pulling the loops first with one one, then on the other hand - so you will weave the bracelet of the fishing tail.
- The length of the baubles requires that periodically the future decoration was filmed from the fork. Do it, as shown in the photo, picing the crochet extreme gum, then gently spend on the tooths upstairs.
- Remove the future bracelet completely.
- Gently put on only extreme loops, continue to determine how they did before.
- Cook on the edges of the fastener decoration. Beautiful bracelet. Ready!
On fingers
- Choose a few gum, contrasting colors - so the fuenus will look more beautiful and brighter. If desired, you can use one-photo materials. For, use the middle and index finger: take the rubber ring, twist the eight on them. The following 2 rings are open without twisting.
- First, remove the bottom left loop, place it between your fingers, then do it with the right loop. They should be in the middle, as you see in the photo.
- Add the following rubber ring. With hinges, which turned out to be the lowest, do similarly to the previous step.
- Remember that when you are weeping baubles, you must see three rubber bands at the same time. Loop the bottom lift up, let go, wear the next gum. So continue to spill until you get the desired length of your product.
- If the bracelet comes out uneven, do not worry. After the completion of manufacture, baubles take the necessary form.
- When you splured the decoration of the desired length, leave 2 loops, do not wear the following. Gently remove them from the fingers. It will take a fastener to fasten the sides.
- Beautiful, multicolored Fenochka ready!
With hook
- If you have a hook, gum, but you can't weave baubles exclusively on your fingers, take advantage of this way. First fold the eight of 2 rings of gum.
- Next, firmly squeeze them between big and index fingers. So that no twisted edges were free.
- Slit tool for free rubber rings.
- Hook the edge of the hook with a gum, stretch it so that it is located approximately in the middle between the free rings, compressed between the fingers. Act carefully, do not pull too much, otherwise there is a risk that the material will fall out of the hands.
- Finger slightly move closer to new rubber bands, grab them.
- Again, thread the hook, as in step number 3.
- Stretch the next gum of contrasting color. Continue as long as you can get the desired length of your product. It can be a finger ring or bracelet.
- Fix the ends of the clasps. The work is over!
With the use of slingshot
- Speed \u200b\u200bas follows: Take the slingshot, put on its edges of 3 gum: the first, twisting the eight, the second just hooking for both edges, the third is similar to the previous one. Must happen, as in the photo.
- Looping the right lower gum. Grab the crochet, grind on top and place between the columns. In the same way, do with the second loop, which is located on the left.
- Put the next gum (it can be a contrasting shade or the same thing that was used before). Lift the hook on the right, which turned out to be lower, remove from the columns, then do the same with the left.
- Put the following rubber ring, not forgetting alternating colors, follow the technique of previous steps. Continue to weave until the bracelet turns out the length that you need.
- Next, you need to fix the bracelet on both sides so that it does not crumble. To do this, fasten the fastener, as shown in the photo, remove the bane from the fork, and then get extra elastic rubber.
- How should it happen:
