Modern culinary books simply die as recipes for winter drinks, which will allow you to make it stops after a long walk in the frost. This includes all sorts of coffee cocktails, and hot mors, and shotgun, cooked according to traditional Slavic recipes. However, all the same can not be better than just a cup of well-brewed tea. Moreover, cooked according to all the rules, in a porcelain kettle, which was pre-leaked to boiling water so that tea leaves could reveal their taste and aroma. After all, tea bags or even pyramids will never be able to make a high-quality drink, yet this is an ordinary tea fastfood. In order for the brewing kettle longer to keep his warmth, and the kitchen looked more comfortable, we suggest you make a doll on the kettle in the best traditions of tea drinking with your own hands.
Mastery in step by step MK Doll on the kettle with your own hands
For the manufacture of dolls on the Dunyash Kettle, you will need:- 1,5 liter plastic bottle
- unnecessary stockings or tights from Capron (the color of the skin of our craft will depend on their color)
- scissors
- needles
- thicks
- filler (cotton or hollofiber)
- clothing fabric
- woolen Threads or Special Puppet Wig
- eyebreaks (you can do without them and just embroider face)
- paints
- brush
1) We start our master class with the preparation of the base for crafts. From a plastic bottle, cut off the bottom and put it in the direction - it will not need it. The plug is also twisted and removed.
2) wind the bottle of filler in one layer and fasten it so that it does not move anywhere. Next, cut a piece of stockhing suitable size and fix it on the bottle so that it does not move anywhere.
3) We lay the filler in the face area, while on the one hand we put a little more syntheps in order for the nose. With the help of several stitches, we form a needle a needle so that the bridge and nostrils are turned out.
4) We stretch a slightly synthescent inside the head blank to get cheeks. I form a small flagery of the synthetone and pushing it into the workpiece under the nose - it will be the mouth.
5) We take a needle again and continue to form a person - consider step by step, as is done. We make snacks on the cheeks, society and lips "Band". If the synthet board begins to roll somewhere not there, do not forget to correct it on time.
6) When the face is ready, you can sew eyes. They can be bought in a special store for creativity or take from the old doll. And it is possible to do without them at all and to embroider yourself.
7) With the help of paints and tassels, we make our doll make meikap, nourishing cheeks and tinting lips. In addition, be sure to draw long eyelashes.
8) The face is ready! Now the free ends of the stockhing on top and bottom are neatly sewn.
9) It remains to sew hair. They can be made from different materials: from ordinary woolen threads or an old wig. For beginners, the most convenient option will simply buy ready-made "hair" in the store for puppeteers.
How to make a doll on the Dunyash Kettle (Hands):1) The hands of our crafts will also be from tights. We take a long enough cutting line and cut it along in half - it will be blanks for the handles. Each of these billets stitched in half so that it turns out the tube. We recruit it with synthepsion.
2) With the help of a needle and threads begin to form brushes and fingers - for this we make several stitches where it is necessary. In addition, we additionally flash the workpiece in the elbow area so that your hands are slightly bent.
3) Send both hands on the sides to the body.
How to make a doll on Dunyash Kettle (Clothing and decoration):So that our pupa looked at home cozy, dressing her in a spacious sundress in an ethno-style. For beauty, the edge of clothing can be decorated with color braid or even embroider patterns on them manually. You can hang bright beads on the neck, and decorate earrings in your ears - the handicraft will look like you want. That's all, the doll on the Dunyash Kettle is ready, you can brew tea and sit at the table!
In the master class, we led only one of the many examples of dolls on the kettle, which can be made independently. For the manufacture of such crafts, it is not necessary to use the frame in the form of a plastic bottle. Lovers of knitting can make such a crochet work. In this case, the skirt of the doll will resemble a knitted hat, and the body and the head will need to be seeded onto her top.
"Classic" dolls on the kettle are performed from a dense felt. This material is not chosen - it retains the body well, but it is not particularly dumping, which is very important, because the handicraft will be constantly being near the products. The schemes of such dolls can be found easily on specialized forums, but it is much easier to come up with and draw them on their own.
Video on the topic
For more information with the art of making dolls on the kettle, we offer to see the following video. Experienced puppeteers will tell about all the intricacies of the manufacture of these cute crafts.
Since Russian people love to drink tea, it is very important that the teapot remains hot as long as possible. Here is a wise Russian and invented for these purposes to use dolls on the kettle. They appeared in Russia at the beginning of the XVIII century and serves as a kind of heating. Their skirts are made of dense material, which allows you to maintain heat, and some of them are made of porcelain and are manually painted. Now, when time for long tea drinking is not enough, the doll is more like a kitchen interior decoration.
.jpg)
I'm on the kettle one
In insulated sundress -
Husband faithful wife
Support it should.
Tea, brewed in a glass,
Not tolerate. In him the spirit is not
And there are no color nor the fortress.
Tea without a kettle - absurdity,
Kuppeva overrun.
Charming dolls warmers on the kettle for the coziness of your home
As a gift or for yourself, your beloved: We will make a kitchen tea with a cozy, make a doll warmer on the kettle!
The comfort and the warmth of each house begins with the details. Stylish kitchen accessories created by their own hands will become an excellent addition to any interior or excellent gift. Bright and funny characters, such as the original heater on the kettle in the form of a doll, bring a little home comfort in your kitchen design, especially since she is not difficult to sew a cockpit on the kettle. Even novice craftsmen will cope with this.
Long sincere conversations for a cup of delicious heating tea became traditional in many families. For a long time, in Russia, the heating dolls used the tea in the samovar longer remained hot. Modern hostesses still do not forget about these cute heart dolls, because thanks to them, tea in the brewing kettle does not cool down and happy with its saturated taste and aroma for a long time. Such an original heater for the kettle will raise the mood to guests and create the atmosphere of heat and harmony in your kitchen.
There are a large number of characters that can be taken as a basis when creating a doll warmer on the kettle.
.jpg)
These are charming dolls, good grandmothers, lush ladies in national clothes, characters of Russian fairy tales (Snow Maiden, Baba Yaga, Home-Kuzya and others), funny cats and cows, and even such exotic animals, like parrots and giraffes. In general, the fantasy of the needlewoman does not have borders.
Once the Norwegian needlewoman Tony Finanger came up with the design of the Textile Doll Tilde, which later became incredibly popular. Since then, masters of all over the world create magnificent dolls based on the very first Tilda. These cute funny girls "tildel" (as affectionately they call them the needlewomen) are very positive and cheerful. They wear bright dresses, funny pigtails, create an atmosphere of comfort and fun, serve as an interior decoration.
Tilde The heater on the kettle will become a stylish accessory in your kitchen and will give joy every day and a positive mood every day.
Baba on the kettle - an indispensable attribute in the kitchen of every hostess, which is easy to do with a step-by-step master class. Possessing the useful property of keeping heat, this product is also an original decor element in the kitchen interior. This fact motivates needlewomen to create all new original fittings.
This article will also be described and shown how to make an unusual Baba on the kettle from various materials.
Learning a step-by-step tailbone on a kettle: step-by-step master class
Very simple performed master class, with even beginner craftsmen, not possessing special cuts and sewing skills.
It will take:
1) old small doll;
2) multicolored and white fabric;
3) Filler (Singrytegone or Vata).
Procedure:1) We prepare a doll, cutting off part of the body. If necessary, type face and carefully combat.
2) Then, from white cloth, we cut a shirt, pre-measuring the toy. Sewing from clothes can be any, the main thing is that later it could be put on a doll. You can sew to the rumper sleeves and arrange them with the same fabric from which the skirt will be sewn. Shirt should be sewed in length more than the remaining part of the doll body. Under it a natber sealer to increase the volume of crafts.
3) We make a skirt. First of all, we cross the scuffer made of white fabric. The pattern will be slightly more than the size of the kettle, so that the guy can easily sit on it. It should be taken into account and allowances for seams.
4) Now we proceed to the manufacture of the widest part - the upper skirt. She is made from multicolored fabric. The pattern will be more than the previous one by the width and several cm in length. The upper edge is flashing with one thread and we are tightened so that the width of the upper skirt is equal to the bottom.
5) Then we sew a blank to the inner side of the bottom skirt. After turning it over it through the edge of the script and we flash again. There should be a distance for gum between the edge and seam. Rubber do.
6) To secure the skirt on the body of the doll, we make straps for sundress, which are sewn to clothing. Now we wear a sundress on a doll. Cut the screech and put on your head, pre-kented.
Doll-heater on the kettle is ready!
We make a babo on the kettle in Tilde technique do it yourself
Distinctive features of the pupae, made in Tilde technique, are similar features of the face, recognizable color gamut and pear silhouette. The same details have a babe on the kettle, which is invited to do in the next master class.
It will take:
1) various types of fabric;
2) filler;
4) decor elements, fittings;
5) needle;
6) scissors.
Pattern:
1) The first thing is measuring the kettle to make the pattern, the size of which should be slightly more than the size of the dishes.
2) From the fabric (it is better to take flax), cut out two blanks on the pattern of the body. Do not forget to leave a centimeter on the seams. We fold the details of the front side inside and stitch along the contour, not touching the bottom. In the place of folds make cuts. Then turn the part.
3) Put the filler in the head and the hands of the pupa to the level of the armpits. Next, we flash the workpiece to prevent falling out.
4) From another type of fabric (for example, Boszya), we cut two lining details, not forgetting about allowances. The same billets are made from Singrytegone. After that, we sew them with each other, leaving a small hole, to then turn the item.
5) Now we flash the resulting part and linen blank. After turning up the face up. And we are manually sewn hole.
6) Fat layer of bosiest and synthesis corrected inside the torso, while engaging with multiple stitches for reliability.
7) Now we proceed to the decoration of the workpiece. To do this, the first thing is sewn cotton skirt just below the center of the pupa.
8) Then we cut the dress and collar from the fleece fabric, put on a doll.
Original Baba Tilda is ready!
Master class on the manufacture of women on the kettle from Capron
Flooring on the kettle can be done even from thin materials, for example, from cardboard.
It will take:
1) bodily stockings;
2) filler;
3) wire;
4) various types of fabric;
5) Velcro;
6) needle and threads;
7) scissors;
8) Ready eyes and eyelashes, as well as other decor elements.
Production Stages:
1) From the wire we form a carcass of the torso and weching the syntheps, creating a volume. Then we put on top of the categorous stocking and make the craft seams on the shoulders and then down. In the same way, we form the palms that are attached to the hands.
2) We manufacture a frame in the form of a bell for a skirt, which is then coated with antenna dense material.
4) From the filler we form a ball, tighten it with cardboard. This is a doll head. With the help of seams, we perform the features of the face, stick your eyes and eyelashes. From yarn make hair, we wear a golk on your head. Freak item to the body.
It turns out a doll on the kettle, as in the photo below.
Video on the topic
Below are the training videos that will clearly demonstrate the process of making the heating on the kettle in various ways, including knitting.
Master class: "Gloor - Tilda" on the kettle
Ayupova Zuhra Maryzhanovna
Lecturer of the Item Technology, SS №29 Kazakhstan Almaty region Talgar district village Besagash
Description:This material is intended for children 8-9 classes, teachers of additional education, parents.
Purpose:for comfort at home and a gift to relatives and friends.
Purpose:Tailoring with your own hands.
Tasks:
- Form the skills of working with tissues of different textures;
- to use the sewing machine;
- develop creativity and aesthetic taste;
- aware of the desire to sew a beautiful thing with your own hands;
- award interest to the upcoming holiday on March 8;
Materials and equipment used:
-sewing machine;
-kin -3 species;
-scissors;
- with a needle;
-Hellifier;
-Kruzheva;
-yarn;
-What;
-color pencil;
Pattern:
Safety Rule when working on a sewing machine:
1. Preced work hair to remove under the store.
2. Site on the entire surface of the chair, slightly tilt the housing and head in front, before the needle.
3. On the plotformation of the machine should not be foreign objects.
4. Hands during operation should be at a safe distance from the driving details of the sewing machine.
5. Prefee that there are no bags, packages next to the pedal, to remove from the pedal if the work is temporarily suspended.
6. When the work is completed, remove the workplace.
Safety Rule when working with scissors:
1. Observe order on your workplace.
2. Before working, check the health of the tools.
3. Do not work with scissors with a weakened fastening.
4. Work only with good tools: well-adjusted and sharpened scissors.
5. Work with scissors only on their workplace.
6. Watch the movement of blades during operation.
7. Blank scissors rings to themselves.
8. Apply the scissors to the rings forward.
9. Do not leave the scissors open.
10. Keep scissors in the case of blades down.
11. Do not play with scissors, do not bring scissors to face.
12. Use scissors for the purpose.
Helpful information:
" Warmer"
Tea Matryoshka "," Dolls-heating "All these names have long had one meaning
- This is decorative dolls that dress on top of the woodland. They are sewn from several layers of dense fabric and have inside the pad from the wool.
Tea Baba - a stewed wool or tissue fabric, died on a brewing kettle to preserve tea temperature. Baba enjoyed much popular in the XIX century. Currently, more often used as a decorative element of the kitchen interior.
The name "Tea Baba", or simply "Baba" happened from the shape of the nozzle-rag doll female in the sundress. Later, various options for animals, fairy-tale heroes, etc. appeared later. In the European tea tradition, women are most common in the form of hats and covers for the kettle. The heater on the kettle was an essential attribute of tea drinking. " The guide is a cap from warm fabric, which was put on the kettle to preserve welding in the hot condition. The heights were made in the form of roosters, women or chicken, dolls, bears, etc.
Often the heights were a masterpiece of needlework and were proud of every good mistress. The tea party in families was wore the character of a real "tea ceremony", collecting around the samovar the whole family, guests, good neighbors.
To perform the heating of the dolls, natural materials are used - cotton fabric of sitheria and batting, which ensures the hygiene of the model. And for the manufacture of national dresses, artificial fabrics are mainly used - they are more decorative, beautiful, since the doll-boat is more decoration of the table.
Gedings for dummies gave friends to different holidays. Dolls on teapots in Russia appeared at the beginning of the 18th century, when tea entered the life and became a national drink.
"Tilda"
When the Norwegian Tonne Finanger (Tonne Finanger) made his first doll - Tilda, she could not come to mind that this pretty Scandinavian toy would unite the needlewomen from around the world in finding new plots, materials and ideas for a whole world called Tilda.
Collective "title" began in 1999 after the release of two books of the author - "Tilda Christmas" and "Tilda Easter".
After almost ten years, the brand has become so popular that thousands of adaptations for needlework (fabric, threads, buttons, patterns, etc.) are sold under the brand of "Tilda" around the world. In a similar technique, other designers (in particular, the Russian woman Oksana Yarmolnik), but still the dolls from Tony (so the name of Froyang Finanger Tilddank) differ in person inherent in individuality. Each figure has its own - and fairly inappropriate - character and prefers to be called by name.
Progress:
1. Remove cloth with insulation.
2. Insulation to fit into the fabric.
3. To stop
4. The edges are combined with each other.
5. Note the top edge, tighten leaving a place for the body (it turned out the ground).
6. Cut the torso, hands using a template.
7. Start on a sewing machine.
8. Turning - fill with cotton.
9. Long torso sew.
10. Cut the skirt, sleeves, blouse.
11. Start sleeves, blouse, put on hands and torso.
12. Connect hands and torso.
13. Start the sides of the skirt.
14. Top edge of the skirt collect assemblies.
15. The lower edge of the skirt to handle zigzag.
16. Skirt to connect with the heating floor.
17. Connect the skirt with the torso.
18. Sew lace on sleeves and neck.
19. Sew black threads.
Tradition to invite friends to a cup of tea exists long. There are people for whom it is absolutely normal on the running of the infusion of something out of the bag, but the true connoisseurs of the drink assure: only the sheet-brewed on all rules can give present pleasure. To preserve heat, it is necessary not a banal towel, but the heater to the kettle. Do it yourself a pattern to do, sew and arrange - it's quite easy.
The easiest version performed. But it does not mean that it should be no - several decorative elements will turn the craft to an interesting kitchen accessory.. You can make a heating on the kettle with your own hands, the master class will help to cope with this task even beginners.
If the boards fully touches the brew, in this case you can do without a complex pattern. The inner surface of the cap is better made of cotton fabric, as a heating material, you can take a synthet, batting or even felt - the main thing so that it provides thermal insulation. The outer layer can be anyone, everything depends on the desire of the author and his creative design.
Wrapped around the kettle sheet of paper, you can determine the width of the tissue cut. Now it is necessary to set the height for which it is necessary to connect paper from the side of the nose and from the handle side.
The resulting rectangle is and will be the size for the inner layers of the cap. The outer cut is made a little large: the fabric should not "pour" the insulation and squeeze it. All layers need to be painted with letters on the seams in four sides, centimeter or one and a half will be enough. After that, you can start an assembly of details:
- First, it is necessary to put the insulation, to adjust 1 cm and flash the bottom edge to the cotton fabric (front side down).
- Top to wrap at 2 cm and also stroke, putting the lace in advance in advance.
- Now turn over the side seam. The main thing is not to flash the laughs, because they need to maximize the top of the bell. The basis of the heating was ready.
How to decorate the outer part of the cap, solve the author of the work: decorate embroidery, beads, appliqué or drapery. And you can take a waffle towel with your like ornament or use the technique of patchwork sewing. The upper "blade" of the heating pads can be both removable and sewn to the bell. The principle of assembly is the same, but the cords of the base and the facial layer must be associated so that the fabric does not shift during operation, and in the "painshoe" the heights need to be sewed to make a loot for convenience.
If there are trimming of fabrics used for the outside, it will be very useful to make several napkins under the cup.
Sew a heap on the kettle in the shape of a chicken is not as difficult as it may seem. Preparing a fabric for the indoor and outer layer, insulation (batting, syntheps), threads, scissors, sewing machine and needle, you can start working:
Many are called the harrant on a brew in another name - Dunyasha. From the dolls made by their own hands on the kettle on the patterns, which were used in the Tsarist Russia, creating self-friendly grandmother, buys comfort and warmth. The difference is perhaps only in the selection of materials. As for the doll itself, there are many options:
- russian beauty with a porcelain man;
- funny tilda;
- krugliti rag toy.
The upper part is old, but in good condition, the plastic doll is also suitable. Working part of the product - the skirt, which is made on the principle of the cap. Dimensions for the pattern of dolls on the kettle in full size are performed using paper wrapped around the wood.
If the upper tissue along the bottom edge is not connected to the insulation and the inner layer, it is worth it to make the functional part: the insulation is decomposed between two rectangles of cotton fabric and set. The resulting billet with a size of 29x74 cm and will become the heat-insulating bell after the side, lower and upper seams are stitching. With the help of elastic bands in Kulisk tighten the basis.
Downturn Dunyasha
To make a head for self-worn woman, it is better to take a beige, but you can also be white, square with parties 29 cm. In the center you need to put a lump of filler (wool, syntheps), wrap it with a tissue and firmly wrapped with a solid thread. Now you need to reliably fix the head, sewing it to the heat insulating bell, stitched from rectangular blanks with a size of 55x23 cm.
The upper removable skirt can be arranged in ethnic style, but it is quite acceptable to create a fantasy suit in accordance with the external data of the selected model.
From the same fabric as the skirt, or one color with a shell tied to the head, you need to sew the sleeves - a tube with a length of 20 cm, not very tightly fill it with a holofiber or syntheps, sew edges. The central part of the blank is attached to the head and skirt, the ends are also fastened with several stitches to the base.
The warmer is ready, it can be executed as an overlap, that is, without certain features of the face. But if there is a desire, then eyebrows, eyes, nose and mouth can be embroidered or draw.
To make a woman on a samovar, except for the head and hands, created as for the Dunyushi, will need a torso with signs of antencoated person. From a colored piece of fabric and foam rubber makes a torso, sew two cotton balls in fabric covers - it will be a lush bust. Functional part of the heaters (heat insulating dome) It is necessary to sew from rectangular and seated billets in size 58x27 cm. All parts are stitched by a secret seam.
But you can complicate the task: make a frame for the product from the wire. Three cuts of 80 cm each should be folded twice, and then start twisting them between themselves in one harness. After 15 cm, at the level of the shoulders, between the segments insert a piece of 20 cm long - it will be hands. Continue twist "torso" to the belt (more centimeters 10), and then dilute the ends on the principle of sparse paws: in different directions and with an arcuate bend outward.
The frame must be installed on the basis and sew on top of the dome, and the excess wire can be carefully cut. The torso is also made on the frame and immediately connects with strong threads with a secret seam of bell. For hands, you can take a ribbon from the residuals of the syntheps and wrap the framework. The head is satisfied with the twist and sewn to the trust of the secret seam. To make hair or braid braids, you can use Moulin or woolen threads for hair.
Now the doll needs to be worn and decorated. Everything will like the author: Mary Ivanovna costume can be even silk or guipure on lining, with beads, embroidery, lace or braid. It is important not to lose a sense of measure and choose the optimal combination of decor and color gamut.
Ways to make a height of the kettle in different techniques a lot, but it's even good: You can choose the option that you like. Any of these dolls will add comfort in the kitchen and will help to make a conversation over a cup of friendly tea sincere and unforgettable warm.
ATTENTION, only today!
