Jacquard knitting schemes for men. Male jacquard pattern sweater

Annenen Sibburn connected the old Norwegian method circular knitting With a simple graphic design, and he looked very modern. It was proposed to knit the body with two details and join together while toning round coquette.

Such patterns are comfortably fitted vertically in the design, forming a round coquette.

Jumper or sweater with round coquette Knit completely in a circle, and body, and sleeves.

Although the sweater or jumper with a round coquette looks difficult, it is not difficult to knit it.

For calculations The percentage method of E. Zimmerman is very good, that is, all sizes are calculated as percentages from the main measure - the volume of the chest, which is taken for 100%.

The housing and sleeves knit separately to the arm.

Then connected to long circular spokes And the coquette knives. The simplest way Set its form - it is to place three rows of outbreaks between the strips of patterns.


For a person of medium addition, the height of the coquette from the armpit to the neck is 25% of the gripping of the chest. You need to divide the depth of the coquette into 3 sections. Until the middle, the coquette does not fit without grazing.

The first recess is made in the middle of the coquette.

A number of grades fit as follows: 2 facial, 2 together in a circle to the end of the row.

The second outflow is at the height of the coquette 2/3-3 / 4. In this row it is necessary to reduce 33% of the loops in the rhythm 1 facial, 2 together.

And the last, the third grade - for 2-3 cm from the neck, in the rhythm 1 facial, 2 together, 2 together.

Refractation This way is convenient to do if the pattern is located in the form of color strips, then the rows of lows need to be adjusted between them.

If the pattern consists of tapering segments, you can use the following method.


In any case, the number of loops of the neck should be 40% of the circle of the chest.


In traditional sweaters, they usually do not touch the sprout. It is not difficult to recover it, especially since it significantly improves the landing.


After combining the housing and sleeves on circular needles, it is necessary to do for the formation of a sprout: a few additional shortened rows and only after that proceed to the patterned coquette. If it allows the pattern, then you can make several shortened rows between the patterned stripes in the middle of the coquetki.

Jacquard pullover Nordica by Amy Gunderson


Pullover female in the style of "Gzhel"

Master class from Svetik NN.


Size 46-48. Yarn: White 4 Mike Aliza Alpaca Royal (100g / 250m) and for ornament 1 MOTK Children's Caprice Two threads and Alise Bebi Vul in two threads.


Spokes socks and circular on line № 3 and 4.

Knit a sweater from the bottom on circular and sash spokes.


Sleeves: Visited Italian set on the knitting needles №3.5 44 loops.

Italian set is well shown on these schemes from the Internet

Knit cuffs to a height of 6-7 cm.

Then we move to the knitting needles No. 4 add 12 loops evenly and knit in a circle of 4 rows front stroke white threads. Then begin to encourage the pattern in Fig.1.

At the highest point of the sleeves, we have 72 loops on the spokes. The armpit remove 11 loops on the pin.

Also knit and the second sleeve. Both sleeves postpone.

Knit torso part on circular spokes. We recruit on the knitting number 3 172 loops (Italian set). Knit a gum 2x2 to a height of 6-7 cm. Then go to the knitting needles No. 4 and evenly add 4 loops for matching the pattern. Knit 4 rows of facial stroke and then in Fig.1 ornament.

Then we need to connect all three details of the whole.

By connecting into the circle, we start knitting a circular ornament on a coquetka.

After the ornament there is an openwork.

She staped with a cortical seam shot with an armpit loop.

That's what happened

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

XS-S-M-L-XL-XXL
Chest girth (finished product): 100 cm
Length: 63 cm
Sleeve Length: 49 cm

Materials

NOVITA 7 Brothers yarn (75% wool, 25% polyamide, 150 g / 300 m) 300 g. White color, 300 dark blue, 100 g of red and green colors; Circular spokes 3.5 mm and 4.5 mm

Knitting density

20 loops and 32 rows \u003d 10x10 cm jacquard pattern according to the chart on the spokes 4.5 mm

Description of pullover knitting needles for men

Back

Thread of a dark blue color to type 102 p. On the knitting needles of 3.5 mm and knit with a rubber band 1x1 (1 persons., 1 izn. The same time in the 1st row add 1 p. Next continue knitting according to the pattern scheme, repeating the rapport of the pattern of 24 hinges horizontally and 1-18 rows vertically (in the scheme marked the beginning of knitting for each size). After 32 cm from the set of the edge knit 4 rows of white thread and then perform 19-52 rows according to the scheme.

Next, knit the thread of dark blue and at the same time at the height of the back detail 42 cm for the arm of the sleeves to close 3 p. At the beginning of the trail. 2 rows and further make a reduction of 1 p. On each side in each 2nd row 7 (7) 7 (9) 9 (9) p. \u003d 83 p. After 19 cm from the arm of the sleeves for the shoulder bevels and cutout The neck continue: close the center. 29 p. For the neckline of the neck and then knit both parts of the back separately, after having completed another 2 row, in the next. Row close 2 p. On each side in the line of the neckline. At the height of the sleeves, 21 cm closure to the remaining 25 p. On each side.

Before

Knit as a back to the height of the sleeves of 12 cm. In the next. To transfer the center. 19 p. On extra. Spice for the neckline, continue knitting separately. Close in the neckline of the neck in each 2nd row 2 p. 2 times, 1 p. 3 times. Finish knitting on the height of the details as for the back.

Sleeve

Tread thread of dark blue color to dial 52 p. On the knitting needles 3.5 mm and perform 6 cm with rubber band 1x1, go to the knitting needles 4.5 mm and white thread, penetrate 4 rows of a cycle knitting, adding in the 1st row of 1 p. Continue knitting according to the pattern scheme Repeating 1-18 rows. After 7 cm from the set of the edge, add 1 p. On each side, repeat the number of adds every 3 cm 13 (15) 16 (18) 17 (18) times \u003d 81 p. (New loops add to the pattern). After 39 cm from the set of the edge, finish knitting 4-row white thread and then perform 19-52 rows according to the scheme, further continue the thread of a dark blue color. At the same time at the height of the Sleeve Sleeves 49 cm for the Oak Sleeves, close 3 p. At the beginning of the trail. 2 rows further make a reduction of 1 p. On each side in each 2nd row 6 (6) 6 (7) 7 (7) times. Close the remaining loops.

Assembly

Perform shoulder seams. On the edge of the neck of the neck, the thread of a dark blue color lift to the knitting knitting of 3.5 mm (incl. Pending loops of the transfer) 98 p., Knit 10 cm with a rubber band 1x1, close the loops, turn the collar and sew it. side.

Insert the sleeves and perform the side seams and seams of sleeves.

Materials:

  • a total of 850 g of Vita yarn "Harmony" (45% wool, 55% acrylic; 110 m / 100 g), of which: 700 g of beige colors (6304), 150 g of brown color (6305);
  • a total of 80 g yarn NAKO "Arctic" (40% wool, 60% acrylic; 100 m / 100 g), of which: 50 g of burgundy color (6071), 30 g of color of the extract (6053);
  • spokes number 5 and number 6;
  • circular spokes number 5.

On the spokes: facial loops (Persons. p.), Pouring hinges (ez. p.), facial smooth (Persons. Person. P., Iz. r. Oz. p.), Gum 2/2 (alternately 2 persons. p., 2 izn. p.); Jacquard pattern: knit according to schemes number 1-3.

Knitting density: 14 p. X 19 r. \u003d 10 cm. X 10 cm, is associated with knitting spokes No. 6 facial stroy.

Description of knitting sweaters with jacquard

Back

Vita yarn "Harmony" brown color on the spokes number 5 to dial 80 p. And knit 2 rows of 2/2 rubber band. Cut thread. Attach the Vita "Harmony" yarn of beige and knit 12 rows with a rubber band 2/2. In the last row evenly add 5 p. On the spokes \u003d 85 p. Go to the knitting needles No. 6 and knit facechair.
To decorate the lines of the PrUMY in the 83rd row from the beginning of work, close on both sides of 3 p., Then in each 2nd row 2 times 2 p. On the knitting. \u003d 71 p. In 43rd from the beginning of the prugi lines Close on both sides of 2 p.
On the spokes \u003d 31 p. Work to postpone.

Before

Vita yarn "Harmony" brown color on the knitting needles number 5 to dial 80 p. And knit 2 rows of 2/2 rubber band. Cut thread. Attach the yarn Vita "Harmony"
beige color and knit 12 rows of 2/2 rubber bands. In the last row, evenly add 5 p. On the spokes \u003d 85 p. Go to the knitting needles No. 6 and knit according to the jacquard pattern number 1 and the scheme of Jacquard pattern No. 2.
To decorate the lines of the PrUMY in the 83rd row from the beginning of work, close on both sides of 3 p., Then in each 2nd row 2 times 2 p. On the knitting \u003d 71 p. For the design of the neckline in the 31st row from The start of the lines to close the average 15 p. and on both sides of them in each 2nd row 1 time 2 p., 3 times on 1 p. on the spokes \u003d 20 p. In 43rd row from the beginning of the lines. Close in one row. Left shoulder perform an alousy.

Left sleeve

Vita yarn "Harmony" brown color on the spokes number 5 to dial 40 p. And knit 2 rows of 2/2 rubber band. Cut thread. Attach the Vita "Harmony" yarn of beige and knit 12 rows with a rubber band 2/2. In the last row evenly add 1 p. On the spokes \u003d 41. Go to the knitting needles number 6 and knit according to the jacquard pattern circuit # 3 and the scheme of jacquard pattern No. 2.
To expand the sleeves in the 8th row from the beginning of the jacquard pattern, add 1 p., Then in each 8th row 7 times 1 p., In each 6th row 3 times 1 p. On the knitting \u003d 63 p. For the design of the OKAT sleeve line in the 91st row from the beginning of the jacquard pattern, it is closed on both sides of 3 p., Then in each 2nd row 5 times 1 p. On the knitting \u003d 47 p. In 113rd From the beginning of work, all loops close in one row.

Right sleeves

Knit like a left sleeve.

Assembly and finishing

Perform side and shoulder seams. Perform seams on the sleeves. Sleeves to sew in the armor.

Gate.

The backing neck loops move to the knitting knitting number 5. Vita "Harmony" yarn "Harmony" beige color on the knitting needles No. 5 to dial up the neck of the groove 41 p. On circular spokes \u003d 72 p. Next to knit 36 \u200b\u200brows of rubber band 2/2. In the 37th row from the beginning of work, all loops close in one row.


Size: 50/52.

You will need: yarn (100% sheep wool, approx. 85 m / 50 g) - OK. 750 g anthracite melange
howl, 150 g of a wine-red and 100 g white; Spokes number 4,5 and 5; Circular spokes No. 4.5 with a length of 40 cm.

Elastic: alternate 1 facial, 1 wrong.

Jacquard pattern: knit according to the scheme in jacquard technique (see page A2). In the wrong rows knit the feeders of the corresponding color of the previous row. Each red rhombus knit from a separate ball. When changing the color in each row of the thread to intersect on the wrong side to avoid the formation of holes. White rhoms are embroidered with loop stitch according to the countable scheme. Loops distribute as described in the instructions. In the height, the 1-60th rows are constantly repeated. Detailed accurate: the right edge: the edge, 2 loops to stick together face. Left edge: 2 loops to stick together with the slope to the left (\u003d 1 loop to remove, as with the face knitting. 1 front, then removed the loop to stretch through it), edge.

Knitting density: 18 p. X 25 r. \u003d 10 x 10 cm, associated with jacquard patterns No. 5.

Back: On the spokes number 4,5, to type the anthracite thread 102 of the loop and for the plank, starting from the wrong row and after the edge 1 of the invalid n., bind 4 cm \u003d 11 rows of rubber. Further, knitted with knitting number 5 on the counting scheme, while the rapport is 50 p between the A-B arrows between the edge 2 x. After 43 cm \u003d 106 rows from the plank C close on both sides for the bevels of Rellan 1 x 7 p., Then in each 2nd p. Reduce 28 x 1 p. \u003d 32 p. After 23 cm \u003d 58 rows from the beginning of the bevels, Rellan closure the remaining loops.

Before: knit as a back, but for the neck to close the average 12 p. Already at an altitude of 18 cm \u003d 46 rows from the beginning of the Rlanlan Skosov and first finish left. By the inner edge for further rounding in every 2nd p. To cover 1 x 3 p., 1 x 2 p. and 3 x 1 p. After 5 cm \u003d 12 rows from the beginning of the neck, close the remaining 2 p. The other side is finished symmetrically.

Sleeves: On the spokes number 4.5 anthracite thread to type 62 loops for each sleeve for each sleeve, starting from the wrong row and after the chr. With 1 wrong, bind 4 cm \u003d 11 rows of rubber band. Then knitted with knitting number 5 according to the counting scheme, while the hinges are distributed as follows: chrome, 30 p. Between the Arrows C-B, therefore 30 n. Between the arrows a and d, chr. For the bevels on both sides in the 9th p. From the plank add 1 x 1 p. and then in each 8th row 11 x 1 p. \u003d 86 p. After 43 cm \u003d 106 p. From the plank, perform zones regleag, as described for the back.

After 23 cm \u003d 58 p. From the beginning of the skuses to close the remaining 16 p.

Assembly: Embroidery by loop stitch over white lines in the diagram. Perform the seams of the reglan, then the side seams and sutures of the sleeves. For the collar golf on the neck of the back, to type 30 p., Through the neck of the transfer 40 p., According to the upper edges of the sleeves of 14 p. \u003d 98 p. Loops closure in the circle and tie 26 cm \u003d 72 circle. Rubber. Then the loop freely close.


Knitting scheme geometric pattern Legend Pattern