Make a bulk snowflake from paper Using 1 A4 sheet. It will help in this proposed master class, in which everything is painted in stages with photos. We can say that this is a description for beginner masters.
A variety of snowflakes are relevant in winter on New Yearfor kindergarten and to school. And for children is an interesting pastime.
Here it is shown how to do.
For work it will be necessary:
- paper;
- scissors;
- pencil;
- line;
- pVA glue.
How to make a bulk snowflake from paper with your own hands - photo stages:
On the sheet, we place six squares with a side of 9.5 cm. This size is taken to fit all the squares on one sheet. If desired, the squares can be made more or less (respectively, the size of the snowflake will be greater or less).
Cut the squares, it is a blank of future snowflakes.
We fold the square diagonally.
We start making cuts on the one hand.
The cuts perform at a distance of approximately 1-1.5 cm. It is important not to reach the fold line. In our case, it turned out 6 cuts.
Deploy the square.
Now proceed to the creation of the workpiece. To do this, take two bottom strips and glue them with each other.
After that, we turn the workpiece to the other side and glue the following strips.
Thus, with the help of glue, we combine all the strips of the square.
We repeat these actions on the remaining five squares. In the end, we get six snowflake blanks.
Now you need to connect them to each other. Apply a drop of glue into the base of the workpiece and connect it on the other. So glue three elements.
Similarly, connect the remaining three blanks.
The resulting two elements (each consists of three blanks) glue with each other.
Now you know how to make a bulk snowflake from paper with your own hands. By this master class, you can perform snowflakes from paper of any color.
Such a bulk snowflake will decorate to a new year, which can be made with children.
Among the most common than our New Year's memories "Rod from Childhood" remain numerous paper snowflakes On the windows, adorned windows of houses, kindergartens and schools. Their carved rays even with the complete absence of real snow on the street gave everyone a feeling of an approaching holiday, forcing to believe in the coming miracles. But years are going, and now we are no longer, and our children cut out snowflakes, decorating school offices and their rooms. IN last years The fashion includes, the so-called, bulk snowflakes from paper. Their creation is definitely takes away a little longer than a simple cut. But it looks such paper creations much more effectively than flat counterparts. Yes, and they can be attached not only to the glass. Volume snowflakes can become christmas tree toys, and pendants that complement the festive tinsel and decorations for lamps in spacious cabinets under the New Year.
In order to make any of these snowflakes, you will need not so much:
- paper (office white, colored or wrapped);
- scissors;
- glue and (or) Stapler.
- In order to make such a volumetric snowflake with their own hands, you will need six paper squares of any sizes and colors. Of the ordinary office paper, it is better to collect a snowflake of medium sizes - 2 squares on a sheet A 4. If you still want to decorate the house of a large volumetric beauty (from the sheet A 4 is cut 1 square), then the paper is better to take more density, because the weight of 6 sheets of snowflake Will saving and lose in effect.
- Each square should first be added to the diagonal, and then - again to get a triangle.
- Now the pencil from the bend should be done parallel to the base of the triangle line, about 1 cm without reaching the edge. The distance between the lines is a centimeter of 1.5-2 (depending on the size of the future snowflakes).
- Cut out. By and large, the line can not be drawn, but immediately cut the workpiece to equal strips in the width.
- Collapse the tube and grind the first strips to the stapler. Of course, the staple brackets look not very elegant, but they will significantly save the time who makes the volume of snowflake, because it is not necessary to wait for the "grab" adhesive.
- Turn over the part and bind over the next two (nearest to the center) strips.
- Continue to turn over the workpiece until all the billet strips are fastened. There should be such a ray.
- Now you should do the same 5 times. It turned out 6 rays.
- With the help of the same stapler, it is necessary to connect races at the bottom. First three pieces, and then combine two large details.
- Finally, it is necessary to connect rays in places of contact with each other.
Volume snowflake with their own hands ready! Of course, it is possible to produce such a decoration not only from white, and from colored paper. If the cuts are not ordinary, and figure scissors, the bulk snowflake will look even more elegant.
Volume snowflake carved with figured scissors (near)
Volume snowflake. Option 2.
This volumetric snowflake is made of thin paper strips. A4 sheet sheet should be cut into strips with a thickness of 0.6-0.8 cm. For a smaller snowflake, 12 paper strips will be required, and for greater - 20.
Work plan:
- Crossing the lattice strips among themselves, engaging the places of weaving with glue. This is a billet. Each snowflake will consist of two cruciform details. For a small snowflake, 3 x 3 lattice lattice, and for a large 5 x 5 strips.
- One lattice must be put on the other, shifting, as in the photo. Connection locations of parts again glue.
- Now rays. Two extreme strips of the lower part should be wrapped up and attach to the central strip of the upper part of the stapler. If the grilles are made of five strips, then with the following extreme stripes you need to do the same. If the grilles were spinning 3 x 3, then you can start creating the next ray.
- After 3 rays are ready, the snowflake must be flipped over and do the same with free stripes.
Complete snowflake made of paper strips
This looks ready for a little and big snowflakes.
Volume Snowflake "On Smell Hand"
Perhaps this is the easiest and fast way creating volumetric snowflakes from paper.
For a small snowflakes, a sheet of format A 4 needs to be cut in pressure and make a square from each half of its half. It should be folded in half, and then again to get a rectangle.
Now you need to cut "ears". It is better to first draw them with a pencil so that the item is symmetrical. Each "UCHO" must be cut twice, slightly not reaching the center, and expand the details.
The tip of the resulting central strip of each ray should be glued in the center. It is also necessary to go with all the rays.
Each snowflake consists of two parts glued together with each other. Crosscross the bulk side. In principle, it is possible to glue the details on each other, but this is how you like it.
Volumented snowflake is ready, and no more than 10 minutes left for its creation.
Update by 11/27/2015
It is extremely simple and at the same time, a very pretty thorough snowflake is obtained from two "harmonic winds".
Necessary materials:two sheets of paper, simple pencil, scissors, gum and stapler.
- Two sheets of paper of the format A 4 we fold the harmonic width of 2.8 cm. At this interval, the harmonica will consist of 10 bands. By and large, paper format and strip thickness do not matter. The main thing is that the strips have a clear amount (8, 10, 12, 14, etc.)
- At one half, the pencil draw a pattern and cut it out (you can do it with curly scissors).
- Bend the harmonica in half so that the edges coincide, and paint the pattern in the second half. So the drawing will be symmetrical. Cut.
- Since there are two accordions for this volume snowflake, we put the carved and cut-cut accordion on each other. Pencil duplicate the drawing and cut out.
- We fold the harmonica together one after another and in the middle we are tightened with a rubber band.
- With the help of a stapler, fasten the harmonica with each other to get a circle.
1. We fold the harmonic width of 2.8 cm 
2. It is necessary to make 2 the same accordion 
3. Collect harmonica 
4. Place the pattern of future snowflakes 
5. Bend in half and draw the same pattern 
6. Cut the pattern from the second side of the harmonic 
7. Must happen like this 
8. Transfer the pattern to the second folded harmonic 
9. Draw symmetrically from 2 sides 
10. Cut the pattern on the second harmonic 
11. Make sure both accordions are the same 
12. We fold together both accordions and tighten with a rubber band. 
13. Both harmonics after screed 
14. We connect the edge of the sheets 
15. That connection should be 
16. We connect the remaining edges of the sheets 
17. Gently fasten all the edges of the sheets. 
18. Play uniformly all bends 
19. Flip the resulting snowflake 
20. Volume Snowflake "Goroshop" is ready
Simple paper snowflakes can do many of us. It is much more interesting and more beautifully look at openwork bulk snowflakes that are made from the same source material. Despite complex and bizarre patterns, make such crafts are not entirely difficult. Below we give, as an example, four master classes in which are represented different techniques Making bulk snowflakes with their own hands.
Master class №1: bulk snowflake from colored stripes with their own hands
Openwork snowflake can be made by applying weaving technique. Combining paper stripes in color, you will get a very bright and interesting snowflake. The bands themselves you can prepare from double-sided colored paper or go easier and buy ordinary quilting strips.
Materials
To make a bulk snowflake from colored stripes with your own hands, take care of availability:
- paper for queening;
- pVA glue;
- tassels;
- clothespins.
In total, 20 bands will be needed for the manufacture of one snowflake. The snowflake itself needs to be done, the masses of her halves.
Step 1. Cross-closet put on the desktop strips of blue.
Step 2.. At the edges from them pairly lay out the strips of light blue and cream flowers.
Laying out stripes, twist them with each other.
Step 3.. Lubricating the tips of the pnewing bands, glue them with each other. At first, as shown in the photo, glue the strips of light color.
Step 4.. Light rays glue blue strips. Blue do not touch yet. It will be half the snowflakes.
Step 5.. Similarly, make a second half of the snowflakes. Fold them together.
Step 6.. Stick the tips of the blue stripes, inserting them into the rays of snowflakes. The strips of one half must be traded and glued to the rays of the second half. Fix the gluing places with clothespins and wait for the glue to completely dry.
Step 7.. Remove the clothespins. Openwork bulk snowflake ready!
Master class # 2: 3D snowflake with her own hands
Despite the seeming complexity, make a 3D snowflake with their own hands very simple. Especially like this occupation for children. Ornaments for snowflakes you can do a variety of, showing your fantasy.
Materials
To create this craft you will need:
- sheets of paper;
- pencil;
- scissors;
- stapler.
Paper will be needed in the form of small squares 10 x 10 cm. For the manufacture of one snowflakes, they will need 10 pieces.
Step 1. First you need to cut a snowflake from a simple sheet of paper. Take one sheet and fold it twice in half.
Step 2.. The resulting square bend diagonally.
Step 3.. Pencil draw the ornament that you need to cut.
Step 4.. Cut the triangle on advanced lines.
Step 5.. Spread the snowflake.
Step 6.. Make similar blanks from the rest of the paper leaves.
Step 7.. Fold five flat snowflakes in the form of a circle. Build them with each other with a stapler.
Step 8.. Make the same half of the bulk snowflakes from the remaining five blanks.
Step 9.. Both half the stapler join each other and gently straighten them with your fingers.
Your large bulk snowflake is ready. You can bind a tape or thread to it and decorate the snowflake room.
Master class number 3: bulk snowflake from one sheet of paper
Most bulk snowflakes are made of several sheets of paper, but you can cope with such a task, taking only one sheet as the starting material.
Materials
To make your own hands a bulk snowflake from one sheet of paper, you need to prepare:
- sheet of paper A4;
- scissors;
- glue;
- pencil;
- eraser.
Step 1. Paper sheet to fold diagonally, the bottom excess strip do trust so that when the paper turns you, you have a square.
Step 2.. Folded on the diagonal square fold once again in half as shown in the photo. As a result, you have to get a triangle.
Step 3.. Cut the petals from the triangle. If you want the petals to come out even, you can pre-draw them with a pencil and after unnecessary lines erase.
Step 4.. Repeat the contours of petals around the edges and make cuts along these lines. Do not cut the end of the petals.
Step 5.. The resulting workpiece will expand.
Step 6.. The tip of the middle part of the petal lubricate the glue and stick it to the middle of the workpiece, slightly giving the finger.
Step 7.. Similarly, glue the average parts of the rest of the petals.
Step 8.. Browse snowflake ready. You can make it bilateral. To do this, make a similar snowflake from a sheet of paper and glue both parts with each other by attaching them one to the other tile sides.
Snowflake ready!
Master class №4: bulk snowflake made of several sheets of paper
From ordinary office paper sheets, you can make the original bulk snowflake. If you take a whole sheet of standard A4 format, the toy will get very large. To make it less, the sheets need to trim a little, but, remember, all of them must be the same in size, otherwise the snowflake will not be symmetric.
Materials
Before making a bulk snowflake from paper with your own hands, check if you have available:
- sheets of paper A4;
- scissors;
- slim tape;
- stapler;
- satin ribbon.
Step 1. You have a piece of paper do you cut, so that you have six equal squares.
Step 2.. Fold the square diagonally, then maintain it again, folding in half. As a result, you must have a triangle with a single fold one by one edge, two on the second and several sheets below.
Step 3.. Put the triangle to the work surface and carefully do three cuts. Cut the strips from a dual fold to single. They must be parallel to the lower side of the triangle. Cuts do without reaching 1 cm to the end.
Step 4.. Expand the workpiece, you must have a square with cuts.
Step 5.. Paper stripes for cuts, those closer to the center, wrap towards each other, forming the semblance of a cylinder. Build them, sicking with the inside of a thin strip of Scotch.
Step 6.. Square turn over. Bend the next pair of bands in the same way, but wrap them in the opposite direction. Continue to fix and alternate stripes and further. As a result, you should get this figure. This is one of the rays of bulk snowflakes.
Step 7.. From the squares of the paper, take another five of the same billets.
Step 8.. The rays of the snowflakes attach each other side of the sides and at first cover them from the bottom, and then at the top.
Pull the ribbon through the snowflake and make it in the loop. She's ready!
Hello, dear friends! How does a meeting with the new year usually begin? Of course, with the decoration of your nest. We put the Christmas tree, we dress on them Christmas balls and tinsel. And also deal with your favorite from childhood cutting and making crafts for the holiday, including paper.
Today we will talk about how to make beautiful bulk snowflakes. Consider the templates I. phased instructionsthat you will help make this beauty.
In one of the previous articles, I already told and imagined, I recommend to familiarize. And now we will continue to make it only with the help of paper, scissors and glue. Connect your children to it, they like this very much. However, adults are not inferior to them and the process itself is very capturing everyone.
Well, let's start with this beautiful snowflakes. It can be suspended for a string or attach to the wall. For this, we will need 6 sheets of paper, scissors, glue and patience. Paper can be taken any color, even to combine colors in one craft.
Phased instructions:
1. Take an ordinary sheet of paper, fold it with an equally challenged corner and cut off the scissors. There should be a square. Make such squares 6 pieces.
2. Then the square fold the corner, and once again fold the corner. Then with scissors cut strips, not coming to the end (see pictures). Make such 4 cuts. After that, deploy the square and see what happened.
3. Next, begin to glue the cut corners. Start from the middle. To help yourself, take a handle or pencil. Put it on the middle of the square along the fold line and wrap around it two inner corners around it, pre-slip one corner with glue.
4. The following corners glue, wrapped in the other direction. Next, alternately glue all the corners, constantly changing the parties. So you will have the first part of our snowflakes. Make six such blanks.
5. Now it remains only to glue all the workpieces. Then, from Veser, our craft is made round, just bending paper, and we will have a very beautiful bulk snowflake. On one of the rays, make a hole on top to turn string and hang it.
Master class on cutting bulk snowflakes
Consider another way of making our jewelry. I do not know how it is called scientific, I call this method "Harmoshka". Why? You litter it now and yourself.
So, proceed:
1. Take two identical sheet of paper and fold them with a harmonic width of about 3 cm.
2. Draw on one of the workpieces the pattern that you will think of yourself and cut it out. Then attach the first template for the second billet and circle a pencil along the contour so that it turned out the same. Cut it too. After that you can deploy the harmonica.
3. On one of the workpieces, wake the edge edge and stick the second workpiece. Similarly, do with the second edge and get the second blank on the other side.
4. And now just put it on the table and give us the shape of the snowflake. Due to the fact that we folded the paper by the accordion, you will easily work.
On the same principle, you can draw templates and cut with different patterns. They will still work very beautiful.
Here is another example. The template is made from one sheet of paper, it just needs to be bent in half and cut on two halves the same pattern:
Schemes for cutting volume 3D snowflakes for the new year
You can make bulk 3D snowflakes. It is also not difficult at all. Cut 3 templates, glue and it is ready. To begin with, make one workpiece, and on it already cut the remaining patterns. Then fold them in half and glue one half with a half of the second blank, and the second half glue with a half third blanks. Well, the second half of the third blank, glue from the remaining half of the second billet (I hope I did not confuse you).
Here are some more patterns for cutting and gluing. And in fact, it is very easy and to fantasize it. The main thing is that the templates are the same.
First template:
Second template:
Or even like this:
The same can be done with 4 templates, and even five. Snowflakes will get even more voluminous. In general, fantasize and invent different patterns so that your home becomes even more beautiful for the holiday.
Video about how to make big bulk snowflakes with their own hands
Here is another way to cut the bulk snowflakes. Simple and affordable. Preparation for the new year is always fun and promising. Babes love to decorate the house for the holiday.
Cut and glue this beauty with them. It is very interesting and fun. For clarity, I picked up for you a suitable video, thanks to which you will not have difficulties in the manufacture.
Now, looking at this video along with your children, you can easily with scissors and glue can make a beautiful bulk snowflake.
Light templates and description of the New Year's snowflakes of paper
Make a beautiful bulk snowflake is not at all difficult. Let's look at a couple more options with detailed description. Making them with their children, you will get great pleasure. Still, this is preparation for all your favorite holiday.
So, the first option:
1. To begin with, make the first workpiece from the paper square. Then the square fold four times the corner, as shown in the figure below.
3. As a result, we turned out the first blank for a bulk snowflake literally in 5 minutes.
4. Now make exactly the same billets, but each time the size is less than the previous one. In total, it should be like this - 1 is the largest, two others are slightly smaller, and two more fewer. In total, there should be five pieces. Then impose two smaller sizes to a large blank and stick to the center. Similarly, do on the other side.
At the same time, for beauty, you can take paper of different colors, as well as increase the number of blanks. This is not fundamentally.
Now consider the second option:
1. Take a sheet of paper landscape size (A4). Fold it in length three times. Then fold the resulting strip in half in width.
2. At the edges, cut small corners with scissors. Then in the middle tie the string, desirable the same color as paper.
3. Now on the folding lines, cut the paper to the center, so that there are separate strips from both sides.
4. Bend each strip in half and glue from the center of the future snowflakes. Then make two outbreaks on each of them. Next, on both sides, each strip bent and straighten the wings (see pictures).
Expand and edit the product in the shape of a snowflake. That's how it should work.
5. In the center you can stick a shiny ball or circle. As a result, it turns out very beautiful 3 D snowflake. You can make such beauty how much you want, use different colors And decorate your home.
Well, my dear friends, we looked at a few interesting ways The manufacture of very beautiful bulk snowflakes that you can decorate your home and office (or other workspace). After all, when it comes to holidays, adults behave no better than children, and we also really want to wait for some miracle. Therefore, we, adults, are also carefully preparing for this magical evening.
Best wishes to you! Until!
White, sparkling, gentle snowflakes are not at all like each other in nature. With coming winter holidays People try to repeat the shape of lace beauties. The basis of silver stars can be a variety of materials: felt, paper, napkins, iron tubes, wooden sticks, etc. This fabulous kingdom in the interior can be created using volumetric beauties. Such paper snowflakes can be done even to children.
As you can guess from the name, this element came to us from Asian countries. Such original lanterns used to celebrate the arrival of the Chinese New Year. We have changed a little, but their beauty from this elegant decor did not lose.
Decoration on braid / thread
Aerial decoration element is suitable for any room. He is suspended on the Christmas tree or hang around the room in the form of garlands.
Lanterns are made of colored paper or cardboard. The principle of cutting is very simple. At the beginning, the sheet is folded in half (in length). On the side of the bend make uniform cuts, not reaching 1.5-2 cm to the edge. The finished sheet is folded into the tube, the edges glue. Top through holes pass the thread or braid, and then the bulk flashlight suspend.
Striped decoration
The festive flashlight is very similar to christmas ball. Its size can be any, it all depends on the length of the strip.
For one decor element, you will need 15 bands (width 1 cm). The flashlight will better look if you make it from cardboard with a New Year's pattern.
On both sides of the strip, retreating from the edge of 3 mm, it is necessary to make holes. For this, the details are folded into the stack and fasten the rivet. Then gradually in a circle push each of the strips, forming a ball. For hanging at the top of the lantern tie a loop, and the threads from the threads are attached to the decoration. 
In the form of drops
For air decoration, you will need 13 identical billets. They are easiest to do with help.
Billets are cut out of a sheet of colored paper, fold in half and glued to each other in a circle. At the top do it for hanging the thread.
By the same principle, you can make a round decor of a given form, it all depends on the template.
Flashlight harmonica
Winter decoration makes colored paper. To start the sheet, the length is folded by the harmonica, and then spread. The edges are connected and glued. 
In each face at the top and bottom make holes holes, where then skip the thread. At the end of the work, the workpiece is bend. Festive decoration Ready.
Fluffy bulk snowflakes with their own hands from paper, stepdown
Paper and cardboard are the cheapest and affordable materials for creativity. They are always at hand and even children can make any decorations from them.
For the formation of a lush ice beauty will be useful:
- office paper sheet;
- glue stick;
- scissors.
For a start form a square, which is neatly folded on the diagonal.
Paper triangle bend several times until it turns out the workpiece, as for ordinary snowflakes.
Gently cut off the bottom corner up.
Then go to the formation of lateral branches, due to which the decoration will acquire fluffiness. Without reaching the central bend, at a low angle, uniform cuts produce.
Now it's time to deploy our snowflake.
For a larger volume of several multicolored blanks form one shaggy snowflake. They are connected to each other glue. It is desirable that the blanks are different sizes.
These are fluffy models in the end should turn out.
An example of a monotonous shaggy snowflake
Volumetric 3D snowflake step by hand with a photo with a photo
3 D decorations are distinguished by its originality. From ordinary paper, real masterpieces can come out, it is worthwhile to stock fantasy and patience.
For work it is necessary:
- colored paper of two colors (white and blue);
- scissors;
- glue stick.
Sheets fold along three equal parts and cut into rectangles.
After folding the first part in half, they make two long sides on the sides and two short in the middle.
Deploy each of the outcropped strips in the opposite direction.
Similarly come with other details. Then parts are connected, alternating shades and forming 3 D of them with snowflake.
Volumetric snowflake made of paper strips with their own hands, in detail with photos
Such a model looks a bit confusing, but it is quite simple to make it.
To work, you will need:
- paper for scrapbooking or sheet paper sheet;
- scissors;
- glue stick;
- braid.
Original look ice beauty from colored cardboard.
12 paper or cardboard strips are cut out, each of which is a length of 15 cm and 0.7 cm wide. Of course, their size can be scaled, making it more or less.
Two strips are folded in half to decide on the center for the next step.
One of the details are vertically on the table, a little glue is applied in the center.
Put another strip across the first at right angles. If the paper has a color and pure side, make sure that the parts lie color up.
The glue is applied to the surface of the horizontal strip in two places. (see photo)
Nearby, two more strips are placed vertically, glued them with a horizontal detail.
A little glue is applied on new strips, in places marked in the photo.
Top of glue is placed horizontally two lanes.
On the photo close-up, showing the details.
The basis of the invalid side is turned over. Then put the glue on the tips of the extreme horizontal strips. (see drawing)
The upper right strip bend down.
The lower strip is glued with the top to form the petal. Repeat actions for the remaining four angles. At this stage, the snowflake should look like this.
Then proceed to the manufacture of a similar workpiece.
Place one half a star to the top of another, shifting it at 45 ° so that the "petals" of one half lay on the line of the lanes. "Petals" of both halves must be addressed to each other.
Side view showing how the details are located.
The tip of one of the "petals" is applied glue.
Apply the protrusion to the "petal" and glue, as shown below. The band should go to 1 cm above the rounding, depending on how long strips.
Make similar steps for all other pairs of "petals" and strips. Side view when the snowflake acquired the original 3D view.
Optionally, you can cut protruding strips. This is what 3d snowflake looks like on the Christmas tree.
Festive decoration can be suspended on a tape or braid.
Variations of the model when the paper uses thinner strips from cardboard or office paper.
Unusual bulk snowflake with their own hands, in detail
Decor is polymer clay Very durable and practical, because it can be hung in the form of garlands, on the curtains and by the fireplace.
Consumables:
- a piece of blue polymer clay;
- rolling pin or rolling machine;
- form of snowflakes. After use for polymer clay, it does not apply for food products.
- rhinestones, beads or beads;
- shilo / big needle;
- shine;
- ceramic tile;
- hook.
After softening clay, the foundation is sent to the rolling machine. If there is no such unit in the economy, you can use the old grandmother's method - a rolling pin or a glass bottle.
The rolled bed is placed on the tile and covered with a piece of polyethylene film. Apply the shape of a snowflake and pressed down. The film will help create bevelled edges.
Carefully remove excess clay, leaving a snowflake on the tile. Its remnants can be applied to another decoration.
On the clay snowfish needle the pattern is applied, and then insert rhinestones in the form of a picture. Everyone will have their own ornament.
The surface is sprinkled with glitter, which is slightly rubbed into the clay.
At the top of the billet fasten the hook.
Then the snowflake is sent to the furnace and bake in accordance with the manufacturer's instructions. After cooling, the work is degreased in soapy water. Ready decor hang.
An option decoration made of white clay.
Garland of white and green snowflakes.
Openwork snowflake fan
Beautiful bulk snowflake with their hands from paper step by step with photos
It is no secret that the patterns of ice beauties are striking with their magic and originality. Before you bulk white-blue snowflakes covered with shiny snow.
To work, you will need:
- white and blue paper;
- glue;
- scissors;
- silver sequins;
- cardboard white;
- pencil and ruler.
Lists to divide on rectangles: blue (5x6 cm) and white slightly smaller (3x4 cm). From the cut parts to wind the killes. One snowflake will take 8 parts.
Then go to cutting circles: cardboard blanks must be in diameter 5 cm, paper - 2 cm. For one snowflake, one circle will need.
The cardboard base is glued in a circle first blue, and on top of white ulles.
Paper circle decorated with silver sequins and close the center of the snowflakes.
When the edge of each blue belg is decorated with sequers, work is ready.
Bulk snowflake made of napkin with their own hands master class
Especially exquisite and sophisticated with ice beauties from napkins are obtained. This is a universal base that is ideal not only for snowflakes, but also for garlands, pumps, and angels.
Shaggy decoration
To work, you will need:
- red large napkin (2 pcs.);
- white medium napkin (1 pc.);
- scissors;
- glue stick.
Formed three squares of different sizes and color.
One square fold is standard several times.
A slightly rounded tail, make frequent small cuts around the edge.
Similar steps are done with the rest of the squares.
Then all three parts are connected by glue, slightly shifting each element. In the center you can put a bead or a brilliant circle.
Snowflake Bowl with their own hands step by step
Felt - very soft Materialwhich visually resembles snow cover. Its combination with a metal shiny thread will make the magic magic in the interior. A similar ball can be made of paper or cardboard.
For 6 large decorations or 12 small, you will need:
- square felt or felt (45 cm);
- metal thread;
- 100% cotton white thread;
- circle pattern.
Gently cut 8 large or small blanks.
Each of them bend in half, making neat folds in the center.
Begin the connection of two circles.
The thread knot is trying to hide inside the product. Details are stitched by small stitches, without leaving the fiftie line.
Then the stitched parts are folded and placed on top and from below two additional figures, trying to accurately accommodate them in the center.
New parts are sewn through the center line in the same way. The thread on each site does not cut off.
The stitched parts are folded again and the remaining circles are added in the same way.
The ball of 16-pets is ready.
Cut off the long shiny thread and form a double hinges for hanging from it.
Work starts from the bottom edge of the center and gradually climb up. The end of the thread is twisted several times and tie the knot near the bowl base.
Petals straighten to the sides to decorate the desired volume.
Large bulk snowflake made of paper with their own hands, scheme with explanation and photo
Large volume decoration looks good in a spacious room, such as living room.
To work, you will need:
- scissors;
- scotch;
- stapler;
- 6 paper squares.
Standard office paper is suitable for decor. Folding the leaf in the form of a triangle, form a square.
Then the triangle is again folded in half.
Holding the long edge of the shapes in the hands, on the one hand, three parallel lines are cut out. They should go from the open side to the direction of the fold. Paper roll over the face down and capture the following ends of triangles.
Little bulk snowflake made of paper with their own hands, step by step
Instead of flat boring snowflakes, we offer to make a three-dimensional decoration. Winter decor is suitable for home interior and decoration hall in preparation for winter thematic events.
Materials:
- snowflake pattern;
- color or white paper;
- glue;
- sequins / sequins; Open the template and cut along the dotted line towards the center. Thus, there are six separate triangles interconnected in the middle. On each tip of the snowflake applies glue and sprinkle with sequins or sequins.
We wish you inspiration and creative success. Rejoin loved ones festive garlands With snowflakes and other New Year attributes.
