Do-it-yourself sundress without a pattern. How to sew a sundress: patterns and master classes

Beach dresses, sundresses will help you to be irresistible on vacation by the sea. You can sew an evening or casual outfit without a pattern in just an hour.

Quick knit dresses - 2 ideas

There are very simple options for creating a summer wardrobe. For beginners, this is just a way out. After all, it is easy to sew a dress using a T-shirt or T-shirt instead of a pattern. You can use this item of clothing as the top of a new thing.


If you like this idea, get started right now. To keep everything at hand, put next to it in advance:
  • T-shirt;
  • knitted fabric;
  • scissors;
  • thread with a needle.
The idea is to sew 2 frills of knitted fabric in the same tone to the T-shirt. To sew a dress with your own hands without a pattern, measure your hips, multiply the resulting value by 1.5 or 2.

If you have wide hips, it is better to make the flounces less lush and multiply the hips by 1.5. If they are narrow, then feel free to multiply by 2.


Stitch each strip of the future shuttlecock on the side, hem the bottom. Collect the top of these parts on a thread with a needle. Distribute the shuttlecocks evenly. Cut out a strip from the same fabric, the length of which is equal to the circumference of the bottom of the T-shirt, and the height is 2/3 of the height of the shuttlecock, also stitch this auxiliary part on the side (let's designate it as "H").

Fold the gathered flounce right side with the face of the bottom of the T-shirt, put a strip of fabric just cut out (“H”) between them, pin it with pins. Sew back 7 mm. Finish all 3 edges of the seam with one overlock stitch or overlock.

Now you know how to quickly sew a dress and you can make another one. This is it.


To do this, cut the T-shirt at the waist, if it is wide, then first sew it in on the sides.


Measure your waist, add 5 cm, divide this value by 2, denote it as "A". Now multiply "A" by 2, you get the number "B". Draw on the wrong side of the fabric, folded in half, a trapezoid, the top of which = "A" and the bottom = "B". Connect the sides of this figure with straight lines. Cut out, leaving an allowance of 2.5 cm at the bottom, and 1 cm at the top and sides. From the same fabric, cut out a wide belt equal to your waist plus 3 cm for a loose fit.


Sew up the side seams. Sew a belt to the top of the skirt, slightly shirring it. Then sew the top of the waistband to the bottom of the T-shirt.


Hem the bottom of the skirt. Open the pockets, sew them in place, after which the dress is ready.

Evening dress per hour

A T-shirt will also help create it. If you want to make a dress that is colorful, then choose a t-shirt in a vibrant color.


Put it in front of you, cut off the top of the bodice, rip out the sleeves. For now, put aside two large canvases, which will soon turn into the back and front of an evening dress. As you can see in the second photo of the collage, each sleeve needs to be turned into a rectangle. To do this, cut off their rounded shoulder lines and side parts, expand.

As a result, you have 2 rectangles: front and back yoke. How to arrange them can be seen in the third photo. The fourth shows that you need to sew the yoke to the front, slightly stretching it. So that when you let go of the details, the top of the front is slightly gathered. Do the same for the back.

Take an elastic band, stretch it a little, measure the top of your chest with it. See that the elastic fits well - does not press and does not fall off. Stretching, stitch it to the top of the product.

To spread the elastic evenly, fold it in half. Pin one piece to the shelf and the other to the back. It can be divided into 4 parts with pins and chopped off not only on the sides of the dress, but also in the center of the front and back.


Useful and pleasant work is over. If you want to learn not only how to sew a dress with your own hands without a knitwear pattern, but also other light outfits made of silk, chiffon, crepe de chine, then check out another idea.

In the first model, the well-known T-shirt acts as a pattern. Attach it to the fabric folded in half across. Pin with pins, mark the center line. From above and armpits outline the fabric on the T-shirt, make the bottom flared. To do this, put a large ruler from the right armpit obliquely, and from the left to the left side, directing the ruler in the same way.

Make the bottom arched. For a large chest, this line should be more curved outward than for a small one.


Cut out, leaving a seam allowance on all sides. Along the neckline and armpits - 5 mm, for shoulder and side seams - 7 mm, for the bottom - 2 cm.

If the shirt stretches and hugs the body when put on, make the top slightly larger than it. Then the dress as a result will not be small.


Stitch the side, shoulder seams, tuck and hem the bottom. The neck and both armholes are processed with an oblique trim or strips of fabric cut diagonally. Here is such a wonderful summer sundress you can make.

Patterns also help to sew a sundress with your own hands. For the next model, a very light blueprint is used. It consists of three parts:

  • hem;
  • straps;
  • belts.
Based on the presented pattern, you can vary it as you wish, for example, by increasing or decreasing the length of the sundress.


Redraw the pattern, put all its details on the wrong side of the fabric, outline. Cut with allowances of 1 cm, and for the bottom - 2 cm. Cut out all the elements, here's how many of them you should get:
  • hem - 1 detail;
  • straps - 4 children;
  • belt - 2 details.
To determine the size of the hem, place the beginning of the centimeter in the center under the chest, lower its back edge down, see how many cm the desired length is. Wrap the hips with a centimeter tape, make an allowance for the smell. So much see will be the width of the hem.

You will determine the length of the straps if you put the zero mark of the tape at a point under the chest, then direct the centimeter to the neck and stop it at the back of the neck at the vertebra. The length of the belt should be such that it is tied at the waist, and at the back - with a bow.

To make it easy for you to sew a sundress with your own hands, follow the step-by-step recommendations.

  1. Turn and hem the first and second sides of the hem.
  2. Lay 2 pieces of the belt on the front side, wrap the edges inward by 7 mm, iron in this position.
  3. Insert the top of the hem panel between the two parts of the belt, slightly gather the hem in front. Sew.
  4. Fold the 2 parts of the first strap with the front sides, stitch on all sides except the bottom, turn the part through it. Make the same double strap for the second strap.
  5. Insert the straps between the two parts of the belt from above, baste, stitch.
  6. Sew fasteners to the thin edge of one and the second straps, which will fasten at the back of the neck.
  7. Mark the bottom, hem it on your hands.
Now you know how to sew a sundress for the summer according to a pattern. A vacation wardrobe should not only consist of these things. To complete it, read how to quickly sew a pareo. At sea, these clothes are simply irreplaceable.

Pareo for the beach

Coming out of the water? it is nice to put on such a tunic or go for a walk along the sea coast in it. To sew a pareo for the beach, take a light fabric.

Measure your hips, multiply this value by 2. Let's designate it as "C". Now determine the length of the product. It starts under the armpits. Transfer these measurements to the fabric, cut out a rectangle along them, adding 1.3 cm on all sides. That is how much you will bend it and stitch all 4 sides.


Cut out 2 strips for the straps. Sew them to two corners that are on the same large side of the rectangle.

To sew a strap, a strip of fabric is folded in half with the wrong side up, stitched from one small and large side. Next, a pencil is inserted into the remaining hole. Pulling the strap on it, it is turned out on the face.



You just have to put on the right pareo. To do this, throw one strap over your right shoulder. Next, pass it in front, under the left hand, bring it back. Move forward again and drape the strap over your left shoulder. The lightweight fabric drapes well and the beach pareo will look great on you.

You can quickly turn a large scarf into this piece of beachwear. To do this, it is enough to wrap it around the body, tie it in a beautiful bow in front at the top. If you do not have a scarf, sew a rectangle out of light fabric, process its edges and tie in the same way.


In the same way, you can sew beach dresses of other styles, for example, this one. For needlework use:
  • the cloth;
  • braid;
  • scissors.


Take a fabric 1.5 m wide. Cut a rectangle out of it over the entire width, its length is the length of your new thing. Find the middle of the rectangle, in this case, it is 75 cm. Make a straight cut for the neckline.

If you want such a beach tunic to be even more magnificent, then you can take a wider fabric or sew two of its fabrics.


And in this example, you will need to make only 1 seam, which will be located on the back. Create it by connecting the canvas.

Hem the top of the dress so that 2 drawstrings form here - to the right and left of the neckline. Thread a string through them. With it, you will tie the tunic around your neck. Use the rest of the braid as a belt.


Now you have beach dresses, pareos, so you can pack your suitcase and go to rest on the sea.

To consolidate what you read, you can see how you can quickly sew beach dresses or for a country holiday and also bring these ideas to life:

The styles of summer simple sundresses with an elastic band are varied - depending on the quality and pattern of the fabric, the elastic band used (thread or regular underwear), the presence of straps, additional details (pockets, belt loops, applications ...)

We offer to quickly sew the simplest and easiest sundress with an elastic band; even a beginner needlewoman will cope with such work.

More than 100 ideas for sewing summer sundresses and dresses can be found.

To sew a simple sundress you will need:

  • the cloth;
  • sewing machine;
  • threads;
  • elastic thread

Pattern of a simple sundress

The sundress pattern consists of three parts - the main part and two straps.

The main part of the sundress is a rectangle.

The sides of the rectangle are calculated as follows:

width\u003d hip circumference + 25-30 cm for freedom of fit (this measurement depends on the quality of the fabric) + 3 cm for seam allowances; length\u003d measurement from the armpit to the desired length of the sundress + 5 (2.5 + 2.5) cm for hemming the bottom and top of the sundress + 6 additional centimeters that are necessary for freedom, because after attaching the elastic, the fabric will shrink (because e. the length of the sundress will decrease).

Straps for sundress:

two strips of fabric 8 cm wide, and the length will be determined during the fitting.

How to sew a simple sundress with an elastic band

  1. We grind the rectangle along the long sides, iron the seams. The seam will run down the back.
  2. We bend the upper cut by 1 cm, iron it, then we bend it by 1.5 cm, we iron it. We thread the elastic thread into the bobbin of the sewing machine, the finishing thread into the needle and sew a line at a distance of 1 cm from the fold. More details about the elastic thread can be found in the article. We leave the ends of the threads about 20 cm.
  3. We do a sample. Depending on the fitting - release or tighten the elastic band. (You can practice on an unnecessary piece of fabric, sew a few lines and calculate the assembly factor). We tie the ends of the threads or fasten with a machine line.
  4. Further from the first line-gum we sew a couple more parallel lines at a distance of 1-1.5 cm.
  5. Let's try again. Depending on the fitting - release or tighten the elastic band. We fix the ends of the elastic bands with a line or tie with knots.
  6. Let's do the third one. We outline with soap on the front side of the sundress a line of hips or a waist line (or you can outline a line under the chest - you get a sundress in the Greek style).
  7. We carry out a line with a finishing thread and a thread-elastic band along the intended line. If desired, you can lay a few more parallel lines.
  8. We put on a sundress, outline the line of hemming the bottom.
  9. We bend the lower section of the sundress by 1 cm, iron it, then we bend it by 1.5 cm, iron it, sew the usual line without an elastic band (hem seam with a closed cut).
  10. We iron the sundress. We do a fitting, and if everything suits, we fix the elastic bands with lines or knots.

Note! You can arrange the bodice of the sundress in different ways - for example, stitch from the top of the sundress to the waist of the line at a distance of 1.5 cm from each other (with an elastic thread in the bobbin case), like this:

Or do it like this:


Straps for sundress

A sundress with an elastic band is almost ready and you can do without straps. But if you still want to make straps, then you will need a length measure, which is very easy to determine - measure the distance from the top edge of the back to the front with a centimeter tape. To this measure, add 3 cm for hemming. Optionally, you can make straps with an elastic band. Then the length of the straps must be multiplied by 2.

We cut out the details of the straps, iron along the fold along (4 cm) with the wrong side inward, then bend the sections 1 cm inward and sew a line (the strap in finished form is 3 cm). We iron the straps, sew one short side of the straps to the sundress, do a fitting, then the other. Overlock the open sections of the straps on an overlock or zig-zag.

For straps with an elastic band, we outline two parallel lines in the middle, sew with a rubber band and then sew to a sundress like ordinary straps.

Another option for straps for a sundress is to sew small loops and loops and sew on the wrong side at the locations of the straps. You just have to buy silicone transparent straps with hooks.

A simple summer sundress with an elastic band is ready! Beautiful in appearance and simple in execution - it will take its rightful place in your summer wardrobe.

And in this she is helped by good makeup, neatness and beautiful clothes. Very often, female representatives cannot buy beautiful and high-quality things for themselves because their cost is too high. In this case, many women begin to sew them on their own. However, the process of constructing a pattern and sewing often requires some basic knowledge. Nowadays, you can easily find schemes for the manufacture of certain products. For example, every woman will be able to sew a summer sundress. A do-it-yourself pattern is very easy to do, since summer things are quite simple in a schematic construction.

Is it possible to sew a sundress without a pattern?

Every woman will be able to sew summer sundresses with her own hands. It is very important that in some cases, to create a beautiful and high-quality product, you do not even need to build a complex pattern. If you want to sew yourself a beautiful summer sundress that will cheer you up, then get down to business, as it will not take much time. To do this, you need to purchase the fabric you like, take threads, needles and start creating the thing of your dreams.

What is needed in order to sew a simple sundress without a pattern?

In order to sew a chic sundress without a pattern, you need:

  1. Any shirt.
  2. Threads.
  3. Needle.
  4. Sewing machine (if desired, you can do without it).
  5. Flowy fabric.

Do-it-yourself summer sundresses are very popular, as their tailoring does not take much time, and the result will amaze absolutely every woman.

How to sew a product without a pattern?

First you need to take any T-shirt and outline its outline. If you want the sundress to fit perfectly and exactly follow the curves of your figure, you can first draw your so-called pattern on paper. Do not worry if you did not manage to achieve perfect symmetry of the left and right sides. Just fold the fabric or paper in half and adjust the pattern.

After that, do not forget to add seam allowances: step back from your lines 1.5 cm and draw another auxiliary one. You need to cut along the second line.

What should you pay special attention to when sewing a summer sundress?

  • Women with large breasts should pay attention to the fact that the shelf (front half of the sundress) should be longer than the back. This is done so that the sundress is not shorter in front, since at the first fitting you will see that the thing seems to be pulled up.
  • Don't forget to make seam allowances.

After that, you need to sweep the product according to allowances and try on a sundress. If necessary, make adjustments and sweep the item again. After the sundress sits on the figure, it is necessary to sew the product on a sewing machine. If this is not possible, you can manually flash the product with a strong stitch.

Neckline and armhole treatment

In order to process the neck and armholes, you can simply fold the edge and sew it to the product. If you want your sundress to look beautiful and neat, you can trim them with an oblique trim or piping. If you have no experience in sewing, practice turning on an unnecessary scrap of fabric, or simply fold the edges of the armholes and necks. This method is suitable for beginner seamstresses.

Do-it-yourself summer sundress without a pattern is sewn! Even an inexperienced craftswoman can make it, because there will be no special difficulties in the process.

Do-it-yourself summer sundresses are very popular among needlewomen, as they are not only beautiful, but also exclusive. A woman who puts on a thing sewn by herself will always remain original and unique, because only she will have such a product. Every female representative who follows fashion and loves to dress beautifully will be able to sew a simple summer sundress for herself.

How to sew a summer dress from an old men's shirt?

Many women are interested in how to sew a summer sundress with their own hands, but are afraid to get down to business because they have no experience. However, don't worry. Because sewing a thing on your own is not as difficult as it might seem at first glance.

If you want to update your wardrobe, but are afraid to buy fabric, build a pattern and make a thing, you can give a second life to an old men's shirt.

In order to sew a summer sundress with your own hands without a pattern, you first need to cut off the collar and sleeves of an old men's shirt. After that, on shreds of unnecessary trimmed fabric, you need to draw two lines 4.5 cm wide and long, which will be equal to the distance from the armpit to the shoulder blades. These will be the straps of the future sundress.

Summer sundress decor

In order to make a summer sundress original and unique, you can sew a strip of bright color under the bust. To do this, you need a piece of fabric, the length of which is equal to the girth under the chest. You can sew it directly onto the fabric of the future summer sundress.

After that, it is necessary to sew the straps that were cut out earlier to the product.

You can process the neckline and armholes with the help of an oblique inlay, or simply fold the edges and carefully stitch them.

If an old men's shirt is not long enough for a sundress, it doesn't matter. In this case, a piece of fabric can be sewn to the bottom of the product, the length of which will depend only on your preferences. A sundress will look very beautiful and original if this fabric is chosen to match the strip under the bust.

This is how a do-it-yourself summer sundress without a pattern can be easily and quickly made from an old men's shirt, which will turn into an original and beautiful thing. To do this, you do not need to build complex patterns and sew at a high level. Fantasy and the desire to be original and unique will help you sew a wonderful summer sundress. A do-it-yourself pattern is so simple that absolutely every novice needlewoman will be able to cope with this work.

How to sew a summer sundress with a flounce?

In order to create a simple thing on your own, you do not need to spend a lot of time and effort. Do-it-yourself summer sundresses are much more convenient and cheaper to sew. They can be made from any fabric you like strictly according to your figure and always remain attractive and unique. One of the most popular models is a sundress with a flounce on the shoulders. In order to sew it yourself, it will take only an hour of your time, imagination and the desire to create.

First you need to take a piece of fabric 150 cm wide and fold it in half. Then take your favorite tank top that fits perfectly, and then circle the shoulders, neck, and armholes. Next, flare the future sundress down and add allowances for the seams.

In order to make an asymmetrical top, simply cut off one shoulder. After that, it is necessary to flash the shoulder and side seams.

How to make a shuttlecock?

Sewing a flounce for a one-shoulder summer sundress is easy enough. You just need to take a piece of fabric and cut out two strips from it, which will be equal to 25 cm in width and 2 m in length. After that, they need to be sewn together.

Useful advice:

  • If you want the flounce on the sundress to keep its shape and look elegant, trim one of its edges with a bias trim.

The other side of the frill must be swept and the fabric collected so that it is equal to the length of the cutout on the summer sundress. The last step will be the connection of the product and the shuttlecock. Now your original and fashionable summer sundress is ready.

Many women who love beautiful things are interested in how to sew a summer sundress with their own hands. Patterns are not needed for this. If you want to create a beautiful and unique thing, do not be afraid to sew and try your hand at needlework. Do-it-yourself summer dresses and sundresses look elegant and elegant, and to sew such a product, you do not need to spend a lot of time building complex patterns.

To sew a beautiful dress for the summer, it is not necessary to have a specialized education or dressmaker skills. Also, the old school marks obtained during drawing or mathematics lessons do not matter, because there are patterns of summer dresses and sundresses for beginners and with their help you can create beautiful clothes with your own hands. To do this, just do some calculations and transfer the pattern to the fabric.

How to choose the most suitable style?

Before creating a pattern for a summer dress or sundress, choose the most suitable style, taking into account:

  • features of the figure;
  • the desired silhouette of the outfit;
  • material used.

For example, thin girls can afford to wear almost any dress: tight-fitting and free-form, regardless of the degree of fabric stiffness. In this case, when making patterns, add a few centimeters to the girths of the hips and chest, especially if you use a rigid material. Thanks to these tricks, the dress will turn out to be quite free, and the skirt will emphasize fragility and harmony.

Owners of magnificent forms are better off sewing products from a hard fabric that drapes poorly, and choosing outfits of an adjacent style. If you add too much stiff fabric on the hips, the dress will look baggy and add even more volume. Such increases can only be made with a thin fabric that drapes well. Long dresses look great, slightly flared at the bottom.

Girls with pronounced forms - large breasts and bulging buttocks, can safely sew fitted knitted dresses. Such a product will be able to “sit down” correctly, emphasizing the beauty of the forms.

DIY summer dresses and sundresses: patterns

Necessary materials:

  • a pencil with a ruler;
  • tracing paper;
  • centimeter;
  • a thin bar of soap or chalk;
  • scissors;
  • the cloth;
  • ribbon or beautiful rope;
  • pins;
  • paper or old wallpaper.
  1. First you need to draw a regular rectangle. Its dimensions depend on the length of the outfit, as well as on how fitted the dress is. The length of the back should match the front of the product.
  2. Then you need to stitch the seams located on the sides, making the upper part of the product like a drawstring.
  3. Inside the drawstring, it remains to insert a ribbon, which will then be tied at the shoulder.

Such simple patterns of summer dresses and sundresses can be used to create a fitted outfit. To do this, you need to take a stretch fabric, since it fits the figure tightly. If there is no such fabric, then you can fit the dress by bending the line of the side seams at the waist (in the photo this is indicated by a blue dotted line). In this case, it is necessary to sew an invisible zipper near the waist.

  1. First you need to cut a rectangle, the length of which can be more than two meters. In this case, it is necessary to take into account your own dimensions, as well as the desired "density" of the folds. The planned length of the outfit affects the height of the rectangle.
  2. The dress has only one seam located at the back.
  3. To get a neckline, you need to make a small incision in the very center (about 10 cm).
  4. The upper part of the fabric is made out, as in the previous model, by stretching two ropes or ribbons into the drawstring. The ends of these tapes need to be sewn in at the back, and in front they should go to the very center. It turns out that putting on a dress, you will tie them around your neck.
  5. You can use most of the ribbon as a belt by tying the dress just below the bust.

The main thing when creating this model is to choose the right material. The fabric should form soft folds, and also be thin enough. Knitwear, satin, several types of crepe, as well as silk have similar properties. It is enough to try the fabric to the touch: when it flows, forming folds, as if flowing, then you can safely buy it.

  1. When sewing summer dresses and sundresses with your own hands, making patterns is very simple: you need to take a T-shirt of the right size, circle it on the back of the old wallpaper. Around the outline, which is the result, you can start drawing your outfit.
  2. If the left half is slightly different from the right, it's not a problem. You can first draw one half, and to achieve symmetry on both sides, just bend it in the middle.
  3. Those with large breasts or pregnant women should make the front of the product a little longer, because it will pull up a little in front, which will make the dress look ugly. It is better to make the front longer and cut off the excess during the fitting if the outfit fits well.
  4. Having drawn a pattern, you need to cut it out and transfer it to the fabric.
  5. Shoulder and side seams are first hand-sewn for trying on: if the dress fits well, then you can sew them with a machine.
  6. It remains to process the armholes with the neckline. For this, the edges are beautifully bent inward. You can purchase a slanting inlay to process the neck with it.

You need to choose a fabric for such an outfit according to the principle, as for the above model. The material used must be thin enough. If you choose a fabric that is too stiff, you will get a trapezoid sundress that will “stand by a stake”.

Patterns of dresses and sundresses

Even a beginner needlewoman can sew a sundress quickly and simply with her own hands. There are models with very simple patterns or without them at all. The easiest way to sew a sundress without a pattern. This can be done in several ways. For example, a sundress-semi-sun, made of scarves, straight with an assembly on top, etc. Or you can not sew a sundress, but knit it.

Sundress-semi-sun

Schematically, the manufacture of this sundress is shown in the figure:

Fold the fabric in half, put your T-shirt on it. Draw a trapezoid along the width of the fabric. Circle the top of the shirt 1.5 cm higher. Fold the fabric in half again in the center, trim the lines so that they are the same on both sides.

The front of the sundress should be a little longer so that it does not ride up on the figure. Baste a sundress, try it on, if necessary, alter along other lines. Sew. Finish the neckline and armholes with bias tape.

Watch the master class on the video:

It is even easier to make a sundress from a T-shirt by sewing a skirt to it. To do this, put on a T-shirt, mark the waist line, not forgetting to leave 1.5 cm for the seam. Cut out a rectangle from the fabric. It is sewn on one side. Gather a spandex skirt, stitch it. Insert the shirt with the right side inside the skirt. Sew on. Make a wide belt. The dress is ready!

Scarf dress

From scarves, you can sew a sundress in different ways.

Take 2 large silk scarves. In the upper part, make holes for chain straps so that they are closer to one of the edges of the scarves. Insert chains into holes. Sew on the sides. The dress is ready! Tuck the long side back into the waistband.

Scheme of the second sundress from scarves:

Make markings on the scarves, as in the diagram. Sew scarves together up to the neck line. Then sew along the back seam. Make straps and sew to the sundress.

Sundress from one large scarf:

Cut off 1 corner of the scarf, as in the diagram:

The cut is the distance between the straps, pick it up yourself. Tuck the cut and stitch or trim with an oblique trim. Sew on straps. Wrap the scarf around the body and mark the beginning of the seam on the back. Flash. Cross the straps and sew to the back of the sundress.

Assembly at the top

This sundress is sewn from a regular rectangular piece of fabric without a pattern.

The length is calculated as the volume of the hips plus 4 cm, plus enough so that the sundress gathers in small folds. The width is the desired length of the sundress.

Fold the fabric in half, make a cutout as in the diagram. The seam can be done on the back or on the side. Treat the neckline with an oblique trim or tuck and stitch. Overstitch or stitch the bottom. Wrap the top so that you can insert two braids.

This sundress can be worn in different ways. If the neckline is in front, then the seam is in the back. If you unfold and make an armhole cutout, then the seam will be on the side. Ribbons can also be tied in different ways, even under the bust.

Rubber band option

It is sewn very easily and without a pattern. Cut out a rectangle from the fabric, with a width equal to the girth of the hips plus 25-30 cm plus 2-3 cm for the seams. Measure the length from the armpits to the desired length of the sundress, plus 5 cm for hemming the top and bottom, and plus 6 cm (the elastic band will shorten the length a little). Sew the rectangle.

Bend the upper edge by 1 cm, iron it, bend it by 1.5 cm, iron it. Sew with elastic thread 1 cm from the fold. Do not cut the thread immediately, leave first about 20 cm. Try on. You can tighten or loosen the elastic band, if necessary. Fasten the ends of the threads. At a distance of 1-1.5 cm from the first line, make 2 more. Try on. So make a sufficient number of lines. Next, try on a sundress. Draw a bottom line. Hem.

Sundress can be worn without straps. If they are needed, then cut out rectangles from the fabric about 8 cm wide, and long - according to the required length, plus 2-3 cm for sewing to the sundress. If the straps are planned to be stitched with an elastic thread, then the length of the rectangles must be increased.

casual outfit

Boho style in clothes is very popular lately. Sundresses were no exception. It can be a thin summer outfit or a sundress for the cold season, which is worn over a long-sleeved turtleneck. Clothing in this style is characterized by natural fabrics, a free silhouette. They can be used for sewing a sundress and lace, which gives the outfit a special lightness and femininity. Options for boho sundresses in the photo: