With the arrival of winter, we most often begin to think about the approaching favorite New Year holidays. So much pleasant troubles: come up with a festive, special menu, prepare souvenirs, interesting thematic compositions and figures for the decor of the room, acquire gifts. You can begin to decorate housing in advance to bring the holiday atmosphere to the house and please the children.
Today's article will tell and demonstrate to you, how do it yourself make New Year's crafts from beads. On New Year and Christmas holidays, you can make interesting compositions such as a Christmas wreath, a star on the Christmas tree or original christmas decorations from beads. Try to make such products with the whole family using the master class presented in this material. As a result, in just a few evenings you will have your own original New Year's toys from beads and wonderful festive souvenirs and gifts.
Traditionally, within new Year holidays The doors of apartments and houses decorates the Christmas wreath. We all accustomed that these compositions mainly consist of green Christmas tree branches with Christmas toys. This master class Offers you an interesting ideaWhere such a New Year's wreath woves completely from beads with splashes of autumn berries on it.
Bisper's color can be changed at your discretion, thus embodying its original ideasSuppose you create unique Christmas decorations from beads to decorate the room.
We begin the master class with the parsing of materials and tools that you will need to blame the New Year's Christmas Wreath.
For weaving leaves, cook:
- beads of a rounded form under No. 11 and a trigger logging under the number 9 of suitable shades;
- copper wire No. 24 or 26 (115 meters long) and No. 30 (about 35 meters), respectively, color to the selected beeer.
For berries:
- round-shaped bispers, the same as for foliage (one thing - one berry);
- beads (four to six millimeters in diameter) of autumn tone with pearl overflows;
- wire No. 30 (about eighty meters).
Other materials:
- copper ring - 20.3 centimeters in diameter;
- green wire No. 30 or a wire required for assembling under the number 28 of the silver shade;
- brown floral tape (if the color of the main material you picked up green, then pick up the ribbon to it).
Sheetting scheme of a poetry sheet
So, in order to make a Christmas wreath for a start need to weave the leaves. Approximately the total number of such blanks is 150 pieces.
Beading of one twig with leaves occurs, according to the scheme of the French circular technique for weaving the leaves of a pointed form. This is one of the simplest weaving techniques that will be suitable even for beginner masters.
Having done three similar workpieces, they must be placed one on one on the front side with sharp tips up, as in the photo. Wire bases twist among themselves, thus forming the stem. Next, the resulting item needs to be revealed by a fan and give your hand to the foliage the necessary appearance. This is done by their disintegration in the center a little out. The first part is ready. Similar way, you will need to make forty-eight such branches.
At the next stage, the master class, goes to creating berries for the New Year's craft. Make the number of such elements at your discretion. To start a beadwork. Prepare segments of the wire under No. 30 to 21 centimeter in length. We recruit one bisper on them, move it in the middle of the segment and put the wire twice. Next you need to straighten the tips and squeeze them with each other, as in the photo.
The next step, it is necessary to turn the wires of the wire through a bead with a diameter of four millimeters and pushing it back to the bearer. At the base of the bead, the tips bind to the node and gradually with their own hands twisted. As a result, you should get a flat wire leg. According to a similar scheme, continue weaving and form the remaining berries.
Now, you need to distribute berries on forty-eight brushes. All brushes are fasten by twisting legs from a berry with each other. The height of such stalks may vary at your discretion.
Each of the brushes with berries is secure to the selected arbitrarily branch with leaves and twist the wire base into one thick stalk. Please note that at this stage, as a result of twisting, the stem exit rather thick, so for convenience we advise you to use pliers, which will make it easier for this process.
After completing the weaving process, go to the assembly. In order to finally form a Christmas wreath, take a ring out of copper and make it winding with a flower tape.
Using the coil wire or the wire for the assembly, it is necessary to attach the first branch with foliage to the ring. Leafles place in the middle. Next, you need to wind the rings to hide the wire base of the stems. At the request of the stems, it is possible to make in short, which will greatly facilitate the process and will help you quickly collect Christmas wreath.
The next step, fasten the second branch to the ring. We place it 1.5 centimeters below the first. Leaflets are rejected with their own hands in left. Hide cuts behind a flower ribbon.
Next, we attach the third branch at a distance of 1.5 centimeters from the second. Here, the leaflets are strung back into the right side, and the wire is hidden behind the floral ribbon. In the photo you can view what the water side of the product looks like.
Similarly, we continue to consistently attach branches with foliage in a step of 1.5 cm, according to the following scheme: in the center, on the left, on the right side, with the left, on the right side. The use of this method allows uniformly to float the christmas wreath in a circle, whose circumference is 61 cm. As a result, the resulting foliage is enough to cover the woven billets of the entire rings.
For the uniform location of the branches with the leaves along the ring, split the blanks into four or two parts and close the ring in proportion to the quarters or halves.
On this beading and master class approached the end. You can show your own fantasy and supplement such a Christmas wreath with interesting details. It can be angels figures, balls, snowflakes and other New Year's crafts from beads.
Bumps on the Christmas tree
The next master class will consider the weaving process of cishechs, which can turn into thematic christmas toys, simple figures or holiday gifts.
Consider the materials and tools, it is necessary to implement this beading:
Instead of oval beads, you can apply the sudden acorn suitable in size.
We take sequins and brown beads. We make two bumps from them, starting from the top. Next, you need to take a thread of a length about a meter and to gain beads on it in the amount of 24 pieces. We collect this low in the ring and leave a free tip at 25 cm. The thread is fixed. Next, you need to retreat three beads from the tip of an unused tip and drive a sparkle on the running end in a convex side, seven beaded stuffs and another sequin, but already another - the right side.
The next step is to have a needle through the fourth in a row from the nickname in the initial ring and in the opposite direction through the gloss and final beerin (as in the scheme). We ride six beaded stuffing, gligulation (from the pressed side). We produce a needle through the beerin of the initial ring (the fourth relative to the previous glignience) and then in the sparkle and the final from the rented.
We make the following similar three arcs from beads with blocks, like the second. We ride five things and make a needle through the beads under the first one of the sequins, then through the sparkle, beads over it and in reverse side In the gloss and bisper under it.
Thread is displayed in the center of the initial arc and it has been done through three beads here and the scaly row is completed.
We make the following five or six similar rows. We ride beads with sparkles for the subsequent arc and make a thread in the bisper, located in the middle of the neighboring arc in the preceding row. Pay attention to the schemes where the weaving process is styled.
At the next stage, you need to insert a bead into the resulting sequin cover at the bottom.
Next, we perform a row with three blocks. The thread is taught in the middle bisper of the neighboring arc. We recruit the beerin, a brilliant material with a convex side, three beads, a gligulation (from the pressed side) and a bead. The needle passes in the middle beads of the pair of neighboring arcs and in the final bead and brilliant material.
Next set: Three beads, brilliant material with a concave side and another bead. The needle passes with the middle beads of the subsequent arc pairs and in the opposite direction through the bead and glistening. We ride the following three things and encourage Ilu in a brilliant element and a bead from the initial set in the row. We are tightened by the lower part of the case, rubbing through the beads, located in the middle of the arcs of the final range (this is the dotted line). Thread is fixed and cut.
We take a needle and ingesting the thread in it, which remained at the initial stage of the set in the top of the bump. We recruit a brilliant element from the pressed side and one bisper. We have done the needle in the gloss in the opposite side with through the center in two neighboring arcs. Fix in this way two shiny items and wake a thread in the initial gloss in this series. After that, the thread is made with three bispers on top of the sparkle (dotted line in the scheme). It remains to pull, fix and trim the thread.
We proceed with the process of weaving needles.
We prepare the wire slightly more than one meter and we ride the main material. We fold it twice and recruit the glass. It will be the first coniferous needle. On any of the tips, we recruit the glass and beads and make them to the initial conifer. The wire is based on the opposite side into the glass. In a similar way, alternately perform the coniferous elements on each of the tips. Total, you need to do about forty-like details. Wire folds in half and twisted. It is necessary to cover with coniferous parts The remaining segment of the wire, leaving the ends of ten centimeters. Leave this chew without twist.
We take the next segment and do it in a bead, located in a shishke. We recruit the brown hue biserin and encourage the current tip through the bead in the opposite direction (as in the diagram). In the case when instead of beads, you decided to apply acorn, the wire is attached to the case. It is necessary to make from ten to fifteen coniferous parts on both sides of the lump. Wire with cheese twists. Next, the next shishchka is attached. We make conifer elements almost before completion.
We fold with each other the obtained items and produce a twist of four wire segments and needles. At the free ends, we recruit on one brown beadine of large and small sizes. Wires in beads of large caliber in the opposite direction. Reflect the tips with a branch and remove unnecessary parts.
Such a composition with cones can decorate the New Year gifts or become a wonderful christmas decoration.
Beaded Star and Wire
Finally, I would like to offer you a simple master class for beginners, where the example of creating an exclusive new Year's Star do it yourself. Such figures will attract particular attention to the Christmas tree, under which gifts are hidden.
The main focus in this example is made on the manufacture of the framework of the product. Here with your own hands, you need to give the right shape and form the desired bend for the New Year's star.
For weaving, use beads different shapes, shades and sizes. Prepare the wire copper, medium diameter and more subtle, which uses beadwork. Also, do not forget to prepare Passatias and pliers.
Prepare all the details for work, proceed to the creation of the star. We take a thick segment of the wire, we fold it twice and twist. It turns out a peculiar braid. At the final stage, one of the ends is attached in the vice, and the second is spinning with pliers. After that, form a star from these elements, the rays of which should be the same sizes.
Using the Passatia, you need to make a loop on any of the corners and spin the ends of the wire. It turns out wrapped tails of small size.
At the next stage, using a wire for beadwork, wind the entire surface of the New Year's star. As a result, it turns out a dense basis for the implementation of the next step. Now on the same thin wire, we make a low of the beads of different shapes, colors and sizes and make winding the resulting part along the entire surface of the star. At the end of this process, the wire tips must be fixed and hidden inside the figures.
Colored beads on the background of copper material, attract a look, and your asterisk will not remain unnoticed. Based on such a master class, you can make figures, products and gifts of different sizes. When creating a big star, carefully wrap the workpiece with the wire, so that there is no emptiness in the composition.
Video: Make a New Year's wreath from beads
Beads - very exquisite and beautiful material. From it you can make a huge number of wonderful crafts. Create a fabulous atmosphere of the upcoming holiday on your unique taste. In this article we will look at: how to make New Year's crafts from beads with your own hands.
You will need: Green, red and white beads, tinsel (rain) on a thin wire.
Master Class
Dog foot
You will need: White and black beads, felt, cardboard, simple pencil, manicure scissors, thin line, needle. 
Master Class
The dog paw from Bead is ready! It can be a brooch, decoration on the Christmas tree, décor for a gift and everyone wants ... Invent your drawing or a figurine, select the color gamut of beads and boldly create festive masterpieces.
You will need: balloon, Wire, beads and beads.
Master Class
You will need: 13 pins, beads, thin wire, asterisk, red ribbon, nippers.
Master Class
You will need: Wire, beads, nippers.
Master Class
The Christmas tree-spiral is ready!How else to evan the Christmas tree from the beads look at the photo gallery, there you will find the idea and method of embodiment.
You will need: Beads No. 8 - white and blue for clothing, light beige for the face, yellow for pigtails, turquoise for eyes and bows, 2 pink beads for mouth and 1 orange bead for the nose, white bead with a diameter of 6mm, wire with a diameter of 0.3 mm.
Master Class
- Prepare a wire segment 140 cm. Use the technique volume weaving: That is - each row should consist of 2 tiers: the upper - form the front part, and the lower tiers - the back.
- Load on the middle of the wire white bead and 4 blue bispers.
- Move the end of the wire from the beads through 4 bispers, tighten the bead to be in the center. It will be the top tier of the first row.
- Put 4 bispers for any end of the wire and skip the other end of the wire through these bispers. This will be the bottom tier of the first row.
- Tighten the wire, it should turn out a circle.
- Upper tier 2nd row: Type 5 blue beads on any end of the wire, skip the other end through them and tighten.
- Nizhny tier: Type 5 reservoirs to any end of the wire, skip the other end through them, tighten - placing the beerki under the top nearby.
- We penetrate the following rows in the same way: 3 row - upper and lower tier 7 blue beads. 4th row - upper and lower tier for 9 white beads.
- Type 6 yellow and 2 turquoise bispers for one end of the wire, hold the last bell and skip the wire through the adjacent turquoise bisper in the opposite direction.
- Move the beads for pigtails close to the workpiece and tighten the wire.
- Put on the same end 2 more turquoise bispers and again holds the last beerink again, skip this end of the wire in the opposite direction through the adjacent beerink.
- Slide the beads close to the pigtail, then tighten.
- Put on the same end of the wire 1 yellow beery and holding it, skip this end of the wire in the opposite direction through the 6 yellow beery.
- Pull the wire, you must get a pigtail with a bow. Similarly, gossip the second braid.
- We make the 5th row of the upper tier: dial on wire - 2 beige 1 turquoise, 2 beige 1 turquoise and 2 beige beverages, skip the other end of the wire and tighten.
- Nizhny tier 5th row Make out of 8 yellow beads.
- The sixth row is the top tier - 3 beige, 1 orange and 3 beige bispers, lower tier - 7 yellow beery.
- The seventh row is the top tier - 2 beige, 2 pink and 2 beige bispers, the lower tier - 6 white beads.
- The eighth row is the top tier - 7 white, the lower tier - 7 blue beads.
- Make Hands Snow Maiden: Dial on any end wire 3 blue, 1 white and 2 blue beads, hold the last blue bead and skip the wire in the opposite direction through the nearest beerink. Move the closest bispers and tighten.
- Type 1 white and 2 blue bispers to the same wire end, then skip this end through the first beerinka hand (next to the torso). Pull the wire - the hand is ready.
- Glow the second hand in the same way.
- Continue your body weaving: 9th row top tier - 3 blue, 1 white and 3 blue bispers, lower tier - 7 blue.
- The tenth row is the top tier - 4 blue, 1 white and 4 blue bispers, lower tier - 9 blue.
- Eleventh row upper tier - 5 blue, 1 white and 5 blue beads, lower tier - 11 blue.
- The twelfth row of the top tier is 6 blue, 1 white and 6 blue beads, lower tier - 13 blue.
- The thirteenth row of the upper and lower tier on 15 white beads.
- Secure the wire: skip one of the ends of the wire through all the beads of the last row of the upper tier, curb both ends, cut off too much and hide the tip inside.
Snowflakes
What new year without snow? Do not forget about snowflakes, because they are the almost most important attribute of the new year. They are fascinating with their beauty and give an incredibly fabulous atmosphere. Weave them from the bead will not be a lot of work - stick to the photo scheme and you will definitely work out!
New Year holidays suggest gifts to relatives and friends. We offer you to make yourself cute baubles. Today we will look at the options for crafts from beads with New Year's theme. Such products are easy to execute, so everyone will be involved.
Festive fir will decorate the interior of the house, so everyone will be happy to get her as a gift. Master class shows beginners how to make christmas decoration from beads.
Baercelling of the Christmas tree will require:
- wire;
- green beads;
- beads;
- pliers.
Make a blank in the form of a cone from thick paper or cardboard. It will serve as a basis for the formation of a spiral from a wire, which you get beads. Experienced needlewomen Control without a workpiece.
The end, bend the pliers into a small ring, as in the photo.
For the top, type three red beads of different sizes.
Then leafing the wire, which will become the basis of the Christmas fir. In random order, strip the rows of green beads ahead with beads. As can be seen in the photo, they have different size and color. Pick up two shades, as on the sample - red and white.
If you did not use the cone to form the outlines of ate, twist the spiral manually. First, it is twisted on the plane, then pull over the top, adjusting the resulting form.
Fire end end in the previous row, and thread it through the last beads. Relieve the form of the final ring so that the Christmas tree stood smoothly.
Any thematic crafts and gifts are amazingly beautiful and touching. We offer you another master class on making angel figures.
Christmas angels from beads with their own hands
To create figures, materials and tools will be required:
- rigid wire;
- large white beads for the head;
- golden large beads;
- beads of different caliber and color;
- fiberglass;
- pliers.
The photo clearly shows that the figure of the christmas angel consists of several main zones.
Christmas wreath of beads
Wreath usually hang on the door, or decorate the Christmas tree. Make it from large beads and medium-sized beads, so that the composition diameter is sufficient.
Materials:
- kapron thread or fishing line;
- red beads;
- golden beads;
- corrugated green beads;
- two beading needles;
- bell for decor;
- weaving schemes.
Wreath collected from ten separate parts by special schemes.
The schemes show the order of weaving by two colors, and marked 2 work threads. Needlework is performed by two needles. As a result of weaving, round elements are obtained. From these parts, a wreath is formed, as in the photo.
After making all the elements, collect the product as shown in the diagram.
At the end of the work, the finished wreath is fluttered with a golden chain of beads. Each round is shown on the product assembly scheme. Of the same chain, only red, the loop is performed at the top.
At the top of the product, attach the bell.
Video: Weaving lesson New Year's wreath of beads
Christmas star
Prepare for work:
- thin wire;
- thick wire;
- glass beads;
- beads;
- ribbon.
This asterisk is a toy, or the top of the New Year tree. Then, instead of the ribbon, make a fastening for a star from the wire, so that it is tightly sitting on the top.
We start our master class:
- From thick wire, form the outlines of the crafts. The size and number of vertices depends on the desire.
- Thin wire begin to wrap the base in different directions.
- In the intervals between the turns, type beads and beads in an arbitrary order.
- Inside, place lights or light bulb from the garland.
- Take the turns until the desired shape of the star is reached.
Video: Star from Bead
Candlestick from beads in New Year's style
Such an excellent composition is performed from girlfriend.
For needlework, you will need:
- wire thick and thin;
- golden wire for curls;
- cD;
- satin ribbon;
- beads and beads;
- salon and candle.
This Christmas candlestick from beads will decorate any holiday.
Ideas for new year gifts from beads
If you are lost in the abundance of New Year's souvenirs in stores, the master class will tell you how to make a choice.
For friends and acquaintances, come up with interior decorations. For example, openwork cute horses are suitable. In the year of the horse they will come up by the way. And if you do two, the lovers who received them for the new year will see their strong pair in the gift.
For students and adolescents the keychain is suitable. Thanks to solid weaving techniques, any drawing is depicted on such a craft: Snowman, Santa Claus with Snow Maiden, Snowflakes or Christmas Tree.
Using skills and skill, you will create souvenirs for relatives and loved ones. They will keep the warmth of your hands, and this is important.
Creating a New Year's interior in the house, you will come across how difficult it is to choose the decoration of one color Gamma. and style. Not only toys are performed from the beads, but also thematic compositions. These figures of animals, snowmen or snow maiden. Create decorative elements You can from any color of the bead that will suit you. These crafts are always unique and unique.
Spend a few winter nights for needlework. Chatting in a warm company, you will create a lot of useful and beautiful things.
Video: Beading earrings in the form of snowflakes
Master Class. New Year's toy From the beads "Snow Maiden"
Leader: Tyurina Natalia Nikolaevna, Educator MBDOU №1, Lebedyan
The master class is designed for children 6-7 years old, educators, parents.
Purpose: for decoration new Year tree, Panel to the new year, work to the exhibition of crafts, as a gift, souvenir - keychain.
Purpose: Performing a "Snow Maiden" toy from beads.
Tasks:
a) educational:
- explain the stages of the manufacture of snow maiden from beads, fasten the skills of parallel weaving;
- learning to work according to the scheme;
b) developing: - develop small motorCoordination of hands.
- develop the ability to work in the team, creative skills; flexibility and conciseness of thinking;
- develop creative independence, cause a desire to fantasize;
c) Educational:
- to compose the admission of children to applied creativity;
-Shipped hard work and prerequisitive, the ability to bring the work started to the end;
- To accustom to accuracy when performing work and the ability to monitor the order on your workplace.
The history of the occurrence of beads.
From bead necklace, seelings
Decorate a female face
But - Gerdan, bracelets, brooks,
Flowers, Easter egg ...
What things are pardon!
The miracle light comes from them
No wonder beading
So popular hundreds of years.
Valid the beads of the people of the people
He decorate the outfit and life.
Changed tastes, style and fashion,
But the beads are still not forgotten.
He can embroider to become smooth,
Flower beautiful and harness.
And he remains a mystery -
Magic, fabulous.
Recent interest in design,
To things beautiful and words.
Let beading mystery
Open these hands to you.
Since ancient times, a person sought to decorate herself, stand out from the crowd of tribesmen and protect against the powerful forces of nature, inexplicable and dangerous. How could he do it? Change the hairstyle, paint face and body with patterns from multicolored clay or weighing the guard, who would protect the dwelling, brought good luck in battle, and on the hunt pressed forces.
The first amulent beads were collected from bones, teeth and animal needles, from seashells and small pebbles, later - from fragments of clay dishes.
Wearing bracelets, head and other decorations and necklaces and women, and men. When did the beads appear? The exact time of his appearance of historians could not be established. The name "beads" comes from the Arabic word "Bucer, Busra" - "fake pearls", and his story is associated with the occurrence of glass, which is known to man for more than 5 thousand years.
Most likely, the glasses of the ancient potters were the first to be found: when firing on a clay product could have a mixture of soda and sand, because of which a thin translucent film appeared on its surface - the first glass. According to another legend, the first people who learned what glass was merchants who traveled to a caravan in the Arabian desert. Among the different goods that they transported, there was a natural soda. Having stopped for the night, the merchants laid out bags with soda bonfire so that the wind does not bluff him. Waking up in the morning, they were surprised to find that the soda turned into pieces of glass. Initially, the beads were stripped on the bravery or horse hair, and later - on the thread. From the middle of the XVIII century. Beads got widespread and began to apply for decorations and finishing of clothing of different layers of the population. In the landlord estate in special workshops, serfs were trained. It was believed that the girl, skillful in needlework - sewing, embroidery, weaving beads, will be okay to keep the house, it will become a good wife and hostess.
Embroidered hats, beads, beads and collars of shoes, straps of sundresses, whipped our own decorations, rubbed shoes, smoking tubes, collars for pets.
In each province of the needlework, they invented their patterns and preserved ancient wearing ritual character. These were mainly simple alternations of individual shapes or their rows, located vertically, horizontally, diagonally.
The ornaments were not for the craftswoman, a simple set of signs - each was of particular importance and woven into the pattern strictly according to the rules.
Beading and other types of work with beads are an exciting occupation for both children and adults. In modern museums and private collections, you can meet truly unique decorations, paintings and panels from beads, braided dishes, handbags, household items and clothing.
Toy on the Christmas tree "Snow Maiden" from beads.
Girl out of snow or ice.
She comes to us in the New Year always.
With grandfather gifts generously distributes
Drives dance, sings songs.
We are her snow maiden affectionately.
And B. magic holiday We are looking forward to visit.
With her mischievous mischievous.
New Year with her very fun to meet.
To fulfill the toys, we need: Snow Maiden scheme, beads (blue white, pink, yellow, brown, red and blue), wire, scissors.
Progress.
We will need a wire with a length of 60-70 cm. Snegurochka weave with parallel weaving according to the scheme.
Weeping 1 and 2 rows. For this, we type 1 white beerink and 2 blue, trying to arrange them in the center.
Then we take one end of the wire and told it through 2 blue beverages.
Pull two ends of the wire in different sidesTo secure a number.
The 3rd row is gaining 4 blue beads on one of the ends.
Thug out with a free end of the wire on the right 4 dialed bispers and tighten the row.
The 4th row is dialing to one of the ends of the wire 5 blue beads.
We produce the free end of the wire to the right 5 of the dialing bispers and tighten the row.
The 5th row is typed on one of the ends of the wire 6 white beads.
Free end of the wire, we felt on the right of 6 died bispers and drag the row
The 6th row is typed on one of the ends of the wire 1 yellow, 1 pink, 1 blue, 1 pink, 1 blue, 1 pink, 1 yellow beery.
We told the free end of the wire on the right all the beerki-typed in the 6th row and tighten the row.
Pigtails.
To perform a pigtail, you need to dial 3 yellow, 1 blue, 1 yellow, 1 blue bispers.
Now we take the same wire on which the beads are put on, move a little to the side of 1 blue, 1 yellow, 1 blue and we produce the same wire 3 yellow bispers left on the wire, tighten the pigtail.
Also we ride the second braid on another wire.
The 7th row is dialing on one of the ends of the wire 2 pink, 1 red, 2 pink bispers.
We produce the free end of the wire to the right of the biserini-typed in the 7th row and tighten.
The 8th row of 4 pink bispers are scored on one of the ends.
The 9th row is scored on one of the wires of 4 white bispers.
We draw the free end of the wire on the right of 4 bispers and tighten.
Hands.
In order to weigh your hands, it is necessary to drive 4 blue wire to one end, 1 white, 3 blue, 1 white beery.
Now we take the same wire on which the beads are wearing, move a little to the side of 1 white, 3 blue, 1 white beverage and stretch the wire through the remaining 4 blue bispers.
Similarly, weave the second hand of Snow Maiden.
The 10th row is scored on one of the ends of the wire 2 blue, 1 white, 2 blue beads.
We produce the free end of the wire to the right of the biserini-typed in the 10th row, tighten.
The 11th row of a plet is similar to the 10th row.
The 12th row is typed to one of the ends of the wire 3 blue beads, 1 white, 3 blue.
The 13th row of a plet is similar to 12 row.
The 14th row is typed on one of the ends of the wire 4 blue, 1 white, 4 blue bispers.
We produce the free end of the wire to the right of the bispers and tighten the row.
The 15th row is gaining to one of the ends of the wire 5 blue, 1 white, 5 blue beads.
We produce the free end of the wire to the right of the bispers and tighten the row.
The 16th row is dialing to one of the ends of the wire 6 blue, 1 white, 6 blue beads.
We produce the free end of the wire to the right of the bispers and tighten the row.
17th row We recruit on one end wire 6 white beads and on the other end wire 6 white beads
From beads you can weigh as a beautiful, exquisite decoration for yourself - like a necklace or bracelet, and decoration for the house, especially for the holiday.
DIY for the new year from beads for beginners: photo
The masters can create real works of art from this material - for example, the Christmas tree is almost a meter high looking as natural as possible - but there is nothing to be afraid of the beginners: the beadwork is suitable for everyone, but to start best with simple things.
For the new year good choice There will be small pendants-figurines (flat) for the Christmas tree, in order to fix on the cabinets or racks or in general to bring as a keychain to please yourself with the festive spirit not only at home.
To weave the Christmas tree, take green, brown and yellow (or golden) beads, several colored bright beads, as well as a solid fishing line or wire - the flexibility for the product is optional here. The Christmas tree consists of three parts - trunk, branches and stars on the top.
Start weathered from the bottom, from the barrel, which will consist of three rows and slightly expand - the optimal amount of bisper 5, 6 and 7 for the entire barrel, but you can adjust in similar proportions if you want a Christmas tree a little more or less.
The branches will take 11 rows. The lower will be the longest, and then the rows should gradually, first at 3-4 beerins, shortening. But remember - the Christmas tree looks like an uneven cone, and the rows should also fluctuate in length - longer "hang" for 1-2 bispers over the previous one, etc.; The main thing is not to make a number longer than the very first in branches.
Poland the branches with green beads, but in each row insert 1-2 colored beads - so that the tree turned out to be "decorated with toys" or "light bulbs". The last three rows should look about as 3-2-1. Leave one of the ends of the wire so far so, and on the second floss the star - each of its rays contains two yellow beerts, and the entire rays are five.
Among themselves they must only be connected with wire, on which the bispers themselves; Just bring it in the form of rays, and the form will continue. Fasten the wire left near the top.
Just like simple schemes, you can evan Santa Claus, Babu Yagu, Snowfish - everything you want; Almost any schemes can be viewed on the Internet. If you do not want to determine the schemes found in the network, make your own, simply by placing the paper in the cell with color handles; For flat figures from beads, nothing else will need. One cell is one bisper.
Crafts for new year from animal beads
You can weigh any animal for the decoration for the new year, but the palm of championship, of course, is usually given a symbol of the year by chinese calendar. However, the old good heroes of children's new Year's fairy tales Always appropriate - for example, hare. For this animal there are many weaving options depending on external view, We will give one of the most common.
To moisten a small volumetric hare from beads, "Expand" a figure - if you are weeping one needle, then, in fact, you will first get the "melted" hare, and only at the end you "collect" him, consolidating both sides on the trouser.
But such a simplified version will give you a figurine quite rounded, reappeared; The same will turn out if we are placed part of the body in a flat version individually, and after collecting them. Better to use volume schemeAlthough it requires some time to figure out how to understand everything.
