And here - ways to create rings from wire or pins. (I will call it "loop" to not be confused with a real ring, here is the same.
The loop may need to be needed in weight. With their help, you can connect beads into the chain, you can suspend the bead on the bracelet or earring, attach the lock ... The most important thing is to learn how to make them smooth and beautiful, as well as correctly blend them.
We take: wire or pin (I have a pin), round-rolls, pliers, pliers, beads.
[b] Non-grazing traces from the rough surface of the tools can remain on the wire and pines. To avoid this, wrap them with tape, scotch tape or plaster.
So that the bead is sitting tightly, there should be no free space between her and looping, and the hole in the bead should be so that both ends of Pina are tight.
If the pin and beads are not friends in this sense, then the spacer or cap with a suitable hole can be placed between the bead and the loop. You can also not trim the pine tail, but wrap it several times between beads and loops. Choose what is more suitable for your project.
The hinge circle is formed due to the fact that the wire turns around around one of the working rods of the rounds. Rods of round-rolls are not uniform, but in the form of a cone. Look at them carefully and decide for yourself, what diameter you need a loop. Remember the place on the rod round rods with a suitable width, the same inner diameter will turn out to your loop. You can mark on the roundheads this place with a marker. Let it be 3 mm.
We wear a bead on pin. On the one side of the beads, we stick to the ball or a hat of the carnation, and on the other - the pine's tail, with him and work.
So that our looping turned out to be smooth and symmetrical, on the central line of Pina, you need to bend the PIN at right angles. This is done by pliers. So that the beads did not hang out, make the bend it is necessary as close as possible to the bead.
Now the most important thing in our business is to correctly calculate the length of the site that will form a loop. If the lengths are not enough, then the loop will not "clock" in the circle, if it is too long, then the circle will not be smooth.
If you recall the geometry, then the circumference length is calculated by the formula 2pir. We pretend: we need a loop with an inner diameter of 3 mm, the thickness of our wire or pin 0.3 mm, which means the total diameter of our future ring, taking into account the wire thickness of 0.3 + 3 + 0.3 \u003d 3.6 mm, which means the radius is 1 , 8 mm. Accordingly, for the correct and smooth circle, we need a length of 2 * 3.14 * 1.8 \u003d 11.16 mm.
Of course, we will not measure Pina's tail caliper to the fraction of a millimeter, we rounded the number and cut everything too much. Having made the ten-twenty penets you already, you will determine on the eye how much you need to leave - centimeter, one and a half ...
Cut:
- If you need a loop that you will then blend to attach other details, then cut off the wire without a stock;
-If you need a bead on the loop, for example for the suspension, then add an extra millimeter-two, this tip then it will be necessary to "fill" in a bead as a thread in a needle;
- if you wander the PIN with your own tail, then do not cut it at all;
- If your pin is thick, for example, like casting pins for pendants, I advise you to cut it out not exactly across the cross section of the wire, but at an angle. Then the cut is very neat and tightly sends to the main part.
So, we are hoping a bead on the pin, the PIN will bent at right angles, the tail is cut to the calculated length.
Now take round the round rolls, turn your hand so that you see your palm, and not the back of the brush.
At the same time, the rounds hold PINs just the place we remembered or noted where the rod width is 3 mm. And now we hold the bead with one hand, and the round-rolls wrap the pine's tail in the ring movement towards yourself (so more convenient for me).
The resulting carriage itself is located smoothly and symmetrically in the center. We turned out to be a neat loot, which you can smear and bow, connecting new elements.
There is another way: PIN is not rejected at right angles, just measured the length of the loop length, pin is cut off, the loop is bent, which is obtained on the side of the central axis of the pine and beads. Then PIN pliers leveled in the center, like this. With this method of rings, it turns out uneven.
If your looping should not be detachable, then direct the most-tip of the pine (that millimeter or one and a half, which we added when calculating the length) inside the beads, as if inwhew threads in the needle.
The photo shows why you need two pine thicknesses.
If you wish to put on a spacer, Daisyk, a hat, a little cron or the like item, then count it up to start its height. Making a might of Pina at right angles, leave up to the beads the same distance as the height of your item.
Due to the fact that the sponges of the pliers also have a certain thickness, a small distance from the beads to the loop often still remains. The second item, suitable in thickness, just can compensate for it.
Wear a detail on PINs after it bent.
Next, the usual loop is performed, which can also be made detached and not.
How to wrap the tail around the pin.
We wear a bead on pin. Between the bend and the bead, we leave a distance for future turns (as we did when adding a spacer) and flexing PIN at right angles. We leave the length for the future loop and again bend the straight angle (it turns out where we would cut the wire).
We grab the roundheads on the site of the second bend and make the loop as usual. It turns out like this.
Now that the hinge circle does not deteriorate, we have done the rod of the round-rolls to it until it stops and take a non-working hand (I'm right-handed, I have a non-working - left). Work hand take pliers, clamp the wire tip
and wrap between loop and beads. Soft wire can be wrapped in fingers.
You can not fly into the hod of the rounds, but to hold it with good pliers. The effect is the same. Supless tail cutting.
I saw such an option of all-in-block loops. If it does not bother that it is not in the center - just do a double ring on the rod of the round-heads.
Well, finally, how to reveal the loop and put something on it, without spoiling such a flat and beautiful circle.
With one tool, we hold the main part of the loop, we grab the second tool for the second barrel and make the movement of this hand on yourself (or from yourself, as you are more convenient). Just do not pull the loop to the sides, otherwise it will turn into an oval.
The photo shows that one loops bar left a common plane, to this gap carefully, we gently produce the desired element and inverse movement (on yourself or from myself) closed the loop back.
Decorations in fashion are always, and when the beads from a natural stone also have healing properties - it's just an invaluable thing in every wardrobe. Stone beads look presented, but it is worth considering that the stone of a certain breed is not suitable for everyone
There are many lessons on the creation of jewelry with their own hands (and therefore unique, not constructed). MK on the decorations is in Li.ru Katra i http://katrai.ru/post210281637/ or you can download a book for "royal decorations with your own hands" http://depositfiles.com/files/221exh7mu, or try to label beads cabochons Following Instructions with http://snivli.blogspot.com/2009/11/blog-post.html.
.
In this article, I will consider to pay attention to the independent manufacture of stone jewelry
.
Age, skin color, hair, eye of a woman, all this plays a big role when choosing decorations from stone. What a variety of stone is suitable for you to see the table
.
.
A common practice to dial beads from small stones to large, as if collecting a mass to the center. On the neck it looks like the beads gradually flow down. Very nice.
Amber, perhaps, the most versatile material for beads. There are few people who do not fit amber. It should be noted that the use of this stone requires a careful attitude to the design of Bus. The young girls are suitable for silver thread with round amber beads, between which there is a sufficiently long distance, while adult women will rather wear two-level beads with medium-sized pebbles, and the elderly - a large amber thread, like a cluster of sunlight and energy thread, with a huge magical and healing force .
.
Looking for beads from Avanturin I want to say not about the decoration itself, but about the stone from which he was made. Avenant is completely stunning material. It seems to consist of billions of brilliance in every way overflowing and changing color in the light. The color of this stone is almost always light brown. Perhaps the only minus Aventurine is fragility, so it is better to use larger stones. Pearls very likes heat (because grew in the body of a living being) and has magical properties: is a stone of longevity and unfavorable beauty.
.
.
Who said that stone beads should be only from this material and no other? You can make a braid bead braid from beads and it will drastically modifly, "Iolate" decoration
.
.
By the way, it is possible that the bead braid will save damaged pebbles from entering the garbage basket. And in a narrowing felling of koboshones will look at all masterfully
.
Several pictures on cabochon felling on the drawings below:
.
5.
7.
Make beautiful beads do it yourself not difficult, even with children. And it does not matter what you have beads, from natural stone or artificial. It is important to make your desire to create something beautiful, stylish and unique, because such decoration in the world no one else will be! Dare!
.
Those times were passed when the jewelry was considered with their own hands and lack of money. Many designers are developing the collection of jewelry that cost much more than decorations of gold with diamonds.
So, what is the jewelry?
According to the definition, jewelry (from French Bijouterie) - Decorations from inexpensive materials. For production can be used a variety of metals and alloys, transparent and colored glass, plastic, ceramics, wood and leather. But high-quality jewelry can consist of expensive crystals, gilding or silver. Such a jewelry in appearance can be indistinguishable from real jewelry, and cost is much more expensive.
In more complex jewelry of leather, real patterns are created or figures are cut.
Natural materials (wood, stones, seashells)
Wonderful summer decorations can be made of varnish seashells and strung on a thread.
Conventional pebbles can also be used to create jewelry. Most often, the stone of an interesting form is powered by wire to create suspension:
And wooden decorations have long become a classic:
Felt
Felt is a magnificent material for creating jewelry. Decorations are very bright and truly sunny.
An original addition to any image can be jewelry from natural stones. Natural materials are attributed to a variety of properties. In antiquity, people believed that stones can help solve health problems and act as a guard. Today, the magic of stones believe not all, but to deny the beauty of natural minerals is unlikely to take someone.
What are natural stones?
Natural stones are diverse. A variety of systems are used to classify them, but the simplest option is divided by all stones for three main groups:
- Precious. These are the most expensive natural minerals, they go to the manufacture of jewelry. This group includes diamonds, sapphires, emeralds.
- Semi-precious. This type of stones is valued less, although in appearance they are not less beautiful. This group of minerals includes amethysts, topases, chrysolites, etc.
- DIY. This type of stones has a relatively small cost. They are used to make not only jewelry, but also of household items - caskets, souvenirs, dishes. The diverse stones include malachite, jade, agate, etc.
When buying products, pay attention to the origin of minerals. You can find products not only from natural, but also from synthetic stones. The first is mined in nature, the second is obtained artificially in laboratories. Although in appearance to distinguish the natural stone from the synthetic is extremely difficult, the structure and properties of these materials are different. They are also distinguished by cost, so unscrupulous sellers may try to sell products from synthetic stones under the guise of natural.
Types of jewelry
In stores you can find a variety of natural stones ornaments. The assortment presents beads, rings, bracelets, earrings.
Beads
Beads from natural stones are one of the most sought-after types of decorations. Such an accessory is universal, it can also be used for business, and for evening image. It is perfect for girls and ladies of any age.
Moreover, beads made of natural stones can have a variety of shape. This can be classic round or oval beads or elements of a complex multifaceted form. Bow shades depend on the type of stones used. Most often, for this type of jewelry, Yashma, Amber, Malachite, Turquoise, Agat and other gems are used. Classic solution - Beads from pearls or coral.
In addition to Bus, there are a variety of organic mineral necklaces. For the manufacture of this type of decoration, metals are used from which they make rims for stones.
Brooch
Even the most modest dress will look great, if you steal his brooch with natural stones. Especially beautiful broths look in combination with monophonic outfits.
Brooch can be a large stone in a rim of metal. Either a metal form (for example, in the form of a flower) decorated with small pebbles. For the manufacture of jewelry uses non-precious metals, but often apply gilding or silver.
Earrings
A varied earrings with natural stones. On sale you can find both modest "carnations", and elegant pendants of the original design.
They carry earrings with natural stones or solo, in this case, other decorations are not worn, or in a set. If you plan to put on the headset, then you need to follow the earrings and second element of the kit (ring, bracelet, suspension) were made of the same stone. Combine decorations with different stones is not recommended.
Persian and rings
Decorations for fingers with natural stones are very popular. It can be like a massive ring with a large stone, and an elegant ring with a squeezing of small pebbles.
Choosing a ring or a spray with a natural stone, try to make this decoration on hand the only one. Exception - Wedding Ring.
Suspension
Pendants and pendants from natural stones often perform the functions of amulets. The product may be a large stone in a rim of metal, but an elegant metal suspension decorated with a small sized pebble looks.
Bangles
At the peak of popularity - bracelets made from natural materials. It can be modest products or richly decorated decorations, with the addition of metal elements, crystals, chains.
It looks stylishly leather jewelry with natural stones. Such a bracelet will perfectly complement the ensemble of jeans and a simple top.
Kits
Often, stylish jewelry from natural stones is made in the form of headlists. The kit may include necklace, ring, earrings, bracelet. However, even having at the disposal a complete headset of jewelry, you should not wear them all at once. For everyday image, one or two things will be enough. For example, seagle or bracelet, or beads and rings.
The designer jewelry from natural stones is especially valued. Handmade decorations from natural materials is always an exclusive. To make the second time the same decoration will not be able to do not be the master. After all, natural stones have a unique texture, so they are not repeated.
The photo you can see how beautiful the copyrighted decorations from natural materials. Such a jewelry will not leave any modnitsa indifferent.
How to choose?
Believe or not to believe in magic of stones - this is the personal matter of everyone. However, it is impossible to deny obvious facts: scientists have received convincing evidence that each type of gem has its own energy, so the stones may refuse the effect on a person.
Tips esoterikov
How to choose the decoration to make it perfect? Some when buying take into account their zodiac sign. However, this approach greatly limits the choice. After all, if, for example, a grenade is recommended for people born under the sign of Sagittarius, it turns out that representatives of the remaining 11 signs of the zodiac circle forever "ordered" wearing decorations with this beautiful stone? Naturally, such an approach to the choice is satisfied with all.
Esoterics offer to choose stones taking into account their personal emotions. That is, if, when looking at a stone, a person is having a pleasant feeling, he wants to take him in his hands, then this mineral is definitely suitable for him. Therefore, the jewelry with natural stones is always better to choose yourself, and not receive as a gift.
In addition, when choosing natural minerals, esoteric is recommended to pay attention to the properties of stones. So, it is believed that Amethyst favorably affects the psyche. It is recommended to wear under uneven voltage. For example, putting earrings with amethyst on the day of the exam, it will be possible to gain great self-confidence.
Aventurine - This is a famous doctor of "heart wounds", it is necessary to purchase people who suffer from unrequited love or survived parting with a loved one. Aquamarine - A stone that provides "insight" if you wear it constantly, then you get the ability to better understand people.
Feline eye - This is a powerful wubble from the evil eye and damage, the pendant with such a peas will allow to keep health on the mental level. Beautiful chrysolite Moves the carrier wisdom in making decisions. And sunny amber Allows you to gain internal harmony.
Stylists tips
If esoterics, when choosing stones, take into account the energy of gems, then the stylists are more interested in the appearance of minerals. Here are the recommendations for the selection of stones, depending on the color of the color:
- Flooking Blondes with light shades It is worth choosing jewelry with amber, jasham, turquoise with a predominance of green shade, yellow topaz.
- Brown shoes with blond eyes and olive skin Perfect decorations with a bluish turquoise, aquamarine, a green variety of agate, rose quartz.
- Red-haired beauties with peach shade skin It is incredible to jewelery from a grenade, transparent amber, a tiger eye, topaz of golden shades.
- Domestic brunettes It will decorate the jewelry with shiny stones, they should choose products from rhinestone, lazurite, zirconium.
Wearing decorations with natural stones Stylists recommend women, regardless of age. Even teenage girls can buy such jewelry, giving preference to bright gems - turquoise, malachit, cat eye. Teenagers and young girls are encouraged to choose decorations with small stones, such as earrings-cloves or a thin bracelet from thin beads.
Starting from 25 and before the oldest age, you can also wear pearls. This mineral is considered a sample of femininity and style, the pearl headset is perfect for the wedding celebration.
For a daily image of a girl and young women can acquire elegant decorations from agate, coral, turquoise and other gems. Women after 50 years old are perfectly suitable jewelry with large stones. It may be brooch, beads or a ring.
What jewelry to buy?
The bijouterie from natural stones can be brand and usual. Elite Italian jewelry is valued for special originality and high quality. No less popular and French jewelry, characterized by elegance and refinement. However, such products have a fairly high price.
And Indian jewelry from natural stones is relatively inexpensive. At the same time, Indian stones are considered one of the best in the world. But it should be noted that the products of Indian masters are made mainly in ethnic style, so they are not suitable for each toilet.
Ornaments made of natural stones in recent years are becoming more relevant. Such necklaces and bracelets serve not only with an excellent accessory, but also allow you to maintain a piece of memories of rest or pastime, in case the stones have been taken from there. You can handle stones yourself. To do this, you will need some tools and several tips on the correct selection of stones.
Materials
You will need:
- stones;
- drill;
- hollow drills with diamond crumb;
- collet nuts;
- plastic container;
- a piece of wood;
- protective glasses.
Step 1: Selecting stones
The hole can be done for any stone, but if you are new in this case, try to pick up the stones of sedimentary rocks. Sandstones, limestones Argillitis and others - softer. They are easy to handle.
Such stones have a rounded shape, they are easily amenable to erosion. If you caught a rude and angular, most likely to you on the beach among the rounded stones, it is more difficult for you to work with him.
Another sign of stones, complex for processing, is characteristic shine. Such stones contain shiny intersions of crystals. Visually they attract attention, but work with them is long.
Step 2: Workplace Preparation
In the plastic container on the bottom, put a piece of wood, lay the stone on top to it, with which you plan to work. Type water to the container so that it closes the stone to 0.5 cm.
Wooden bar is needed so that during operation you do not drill the container itself. And the water is needed that the stone during drilling is not heated strongly. Thanks to the water dust from stone during drilling will not be.
After all is ready, put on the protective glasses and start work.
Step 3: Drill a stone
Keep the drill in the position perpendicular to the working stone. Keep the tool itself with dry hands. Watch out for this.
During drilling, move the up-down tool. It will give the opportunity to fall into the drilled hole, wash the dust and at the same time cool it.
In order to drill a hole in a small sedimentary rock, you will need 2 to 3 minutes. With larger stones or a stronger breed of time will leave more.
