"Syricen" is a Japanese weapon for throwing. It is usually worn hidden and unnoticed. Syricen is small blades made from used in everyday life: asterisks, coins, nails, needles, knives, etc. But a throwing "surround" can be completely harmless if you make it out of paper.
Step-by-step instructions for creating a four-pointed "Syricen".
1 step. Take paper.
"Syricen" can be made of white paper, but for greater clarity and colorfulness it is better to use color.
2 step. From sheets make squares.
To create a four-spin "Syrichen", two identical squares will be required.
3 step. We take one square and edges connect in the center.
4 step. Bend the resulting rectangle in half.
5 step. On each side, the mirror bend the corners as shown in the photo.
6 step. Once again, on each side, the mirrored seals symmetrically made previously made triangles.
7 step. The same thing (from 3 to 8 pitch) We do with a second square. The second half of the "Syricen" should be a mirror reflection first.
8 step. One part of the part turn over and lies as follows the first.
9 step. We drive the corners of the lower part in the resulting pockets in the upper part.
10 step. I turn over the resulting figure.
11 step. Again, the same is done with the bottom half.
12 step. The four-spin "Syricen" is ready.
The final view of the crafts of the four-pointed Syricen.
Step-by-step instructions for creating an octagonal "shuriken".
1 step. We will need 8 identical squares.
2 step. Preparation of the square.
Severate the square first diagonally, then in half.
3 step. Two corners connect from the central line.
4 step. In the opposite side, a rectangle is formed, which we wound into the inner side and fold the item.
5 step. Similar actions are done with the rest of 7 squares.
6 step. We collect "Syricen".
All details lie in the same position. Part of one part with curved corners insert into a concave triangle closed. The resulting tips bend into inside the part for fixation. So connect all 8 parts.
7 step. Pull the free triangles.
8 step. The octagonal "Syricen" is ready.
The final view of the crafts of the octagonal shuriken.
Two final crafts.
We hope that the manufacture of this craft has brought you a charge only with positive emotions and a good mood. Referring a series of crafts from paper, the next time we can offer you paper claws that are very simple in recreating!
Training work with "hidden blades" ( syrichen) often entered the school training program nindzutsulike ancient and modern. But in our days, find a real, a worker, suitable for the development of blows or throwing, is quite problematic. The maximum of what can be found on the market is a souvenir asterisk, made of brilliant, but extremely sluggish metal, sizes barely fit in hand. A sense of such a "tool" is a bit, so the question is how to make a real Surician Ninja at home or in limited conditions, becomes quite relevant.
From articles pro syrichens, we know that there are two forms of execution of "hidden blades" - bo-Syrichen and hira-Syrichen . And those and others were used as a melee weapon (as castetor javara), so for the defeat of the goals at the distance. Work out tajyutsu With sharp items without an experienced teacher, it is not recommended, and throwing stupid wooden or rubber blanks will not allow the throw to feel - therefore, you may need Surikanes of the most different properties and material.
Production of Bodzo-Syrichen
First you need to decide on the materials - if you want to work out bo-Syrichen, In any case, you will need a metal weapon in any case (although it is extremely recommended to begin to engage in throwing techniques with knives). It is practically nothing to make anything from scratch in this way, since a huge number of items are already in itself almost Bo-Surichen (you will only need to shorten the source code to 18-20 cm, sharpened and, if necessary, handle a file):
- Thick spokes
- Checks and crutches
- Famining pieces of fittings or rods
- Nails
- Any elongated metal object that does not mind sharpening (everything, right up to old table knives).
If a great desire to create bo-Syrichenit is a specific or original form that is exactly the search for the search or the acquisition of the source material - a metal, rubber or wooden plate (depending on which you plan to use the finished product) with a thickness of at least 5 mm and a width of not about 20 cm (see which weapon length will be the most Convenient for your brush). Decide on the form (you can use the samples of the picture on the right) and draw the desired result on the plate. Carefully cut / drink the workpiece and clean the edge. Sharpen the end (or both) and add a "tail" or "wings" if you wish (they will help Surikane to keep the direction of flight). Ready.
Less troublesome and more massive personnel bodzu-Syricaneat home is the systematic sawing of the very plate (but here the thickness is better to choose more - about 1 cm) into pieces of the above-mentioned length (\u003d width of the plate). The resulting pack of bars may well be sharpened and used as a harsh and cheap variant of throwing weapons. Example on the left.
Making a Shayna or Hira-Syrichen
There are practically no analogs for rapid substitution of XIONN. Popular for throws in the Union after the appearance of films with Sho Roshogi bicycle stars, radiator plates, cutters saw, of course, terrible in appearance, but were not exactly what was used in feudal Japan military classes. Therefore, almost the only way out here is the creation of such a "throwing star" yourself.
For xaynovThat you want to use as a caste - from wood and rubber - the manufacturing process is very simple: you again find the plate of the desired material, are placed (for the development of painful points it is better for three - and four-beam stars), cut the sucliner and remove excess the knife. Thickness in this case will be determined as follows - the thicker than the star, the less painful and safe will be working for your sparring partner. That is, one or two centimeters for the rounded ray will be quite enough.
If you want to make an asterisk, which will really fly and stick into the target, then your only acceptable choice of material is metal. What no matter is the main thing that it is solid (or thick), and you could not bend it with bare hands. Production procedure will be like this:
- Star shape on the workpiece. Another way is to print one of the patterns in the pictures below and glue the metal.
- If the metal is too thick for handling, it is required to drill as many holes as possible on the outside from the markup or template, and then cutting the "partitions" between them.
- The resulting "hedgehog" form should be treated with a file, smoothing the protrusions and giving Xayn the desired appearance.
- Just fasten the most tips of the rays, it will be enough for them to stick to the target
Optionally in the center sia-Syricane(asterisks) You can make a hole so that you can wear them with a bundle, or sharpen the rays along the entire length. In this case, it will become potentially traumatized for an ineptly surrounding surrogue, so be careful. And do not forget - Syrichens are cold weapons!
Syricen is an ancient Japanese throwing weapon. So-called throwing "stars". In the literal translation means "blade hidden in hand." In addition to weapons, this item can be an amulet that gives its owner courage, durability, endurance and power. Syricians are like four-pointed and eight-pointed.
Another type of Japanese art is origami. In childhood, making out of paper airplanes, boats, children are mastering it. It is very useful for the development of shallow motors of the hands and imagination in children.
From paper, besides the usual figures, you can make Syurikins. Weapons, of course, will not be, but they fly very well. Children will be able to come up with a large number of games with them.
Origami Scheme quadrangular monochrome Syricen
Syricen of paper can be done like this:
- It is necessary to take a regular sheet of paper and make a square from it. To do this, the right upper corner is smoothly combined with the left edge of the sheet. Extension cut
- Cut the resulting square in half
- One of the halves of the square vertically bend in half - it turns out a narrow rectangle
- The left bottom corner of it to get up, to the edge, and the right upper - down
- Now repeat the previous stage for the upper left and lower right corner
- After that, we repeat the same steps with another half of the square. Only on it, the bends must be made in the "mirror reflection" relative to the first half
- Then, one of the details bends in half so that a figure consisting of two bent triangles with angles in opposite sides
- We assign both halves on each other, free corners bend in the center of the figure
- We turn over, repeat the procedure again
Syricen ready!
The same scheme is suitable in order to make a two-color toy. In this case, you need to take half squares of different colors.
As mentioned above, Syricen can be eight-pointed. Analog it can also be made in the Origami technique.
Origami scheme for the manufacture of eight-pointed surrogne
In order to do it, you will need 8 square sheets of paper.
- Squared vertical and two diagonal folds of folds
- Two corners located nearby bend to the center, the edges go exactly vertically
- The remaining half of the square bends on the principle of "harmonic". Vertical fold is upstairs, and the angular diagonal - down
- The same actions are repeated with the rest of the squares.
- After that, according to the origami principle, the protruding parts, you need to insert into the holes and get the ends
It is possible to use such a sucliner to use both two contrasting colors, and pick up the color range to your liking.
It is not worth doing this craft from too thick paper, since the weight of the product strongly affects the aerodynamic properties. The harder there is a toy, the worse it will fly. You can also smoke the locations of the details to extend the service life.
Make a Christmas toy in the form of Syricen
In addition, you can make the original decoration on the Christmas tree in the form of Syricen in the Origami technique.
It is necessary to use dense foil or metallized colored paper.
- To do this, take two identical squares.
- Note on one of them horizontal and vertical folds of folds
- Fold it in the form of a triangle, deploy and repeat the action only on the other side
- Neatly, without going in half the length of the bend to make an incision, minimize the edges of triangles inside the tube, cry
- After that, repeat the same with another detail.
- The last step is to glue them together, attach a thread on which he will hang
To begin with, we suggest you to figure out what Syricen is. Syricen ─ This is an asterisk that was used by samurai and ninja warriors in ancient times. That is, its origin began in Japan, and means this term from the Japanese blade, hidden in his hand. He performed as an additional weapon if the sword or spear did not help in the battle, or simply for these types of weapons did not have access to the warrior. Today we will tell how to make the origami shuriken from paper, which will be safer for a real asterisk.
Initially, it was done from metal thin strips, which were sharply sharpened rays. They could have a round shape, as well as a form, which consisted of four, five or eight corners. Also in the center of this weapon, a hole was made to improve aerodynamic properties. You can see such a weapon in the photo.
This toy is beloved for many children and schoolchildren. Especially since it is often found in the cartoon Naruto, who loved almost all the children, like the youngest, as the middle and older school. It can be done with the teacher in class lesson.
Just can you introduce children with this technique of working with paper, make an excellent toy for them, which they will be able to play for a change, and also to develop a small motorcycle, attentiveness and fantasy. Therefore, this master class can be used as an additional material when preparing for the lesson and writing an abstract. Also, this material can be useful for those who lead various mugs "skillful handles" or conducts children's holidays.
Schedule collecting Syricen
1) For this craft, we need a square shape sheet. I will be in half.
2) cut the sheet into two equal parts, along the fold line.
If you want Syricen multicolored, then take just two sheets of different colors, only the same size.
3) We put in half each piece, so that two rectangles are in the end. Then you need to add the angles of each rectangle as follows: one to the bottom edge, and the other ─ to the top, as shown in the figure.
4) Now we need to once again fold the obtained billets along the lines that are symmetrical to triangles.
5) The resulting two models must be mirrored.
6) Now we collect our asterisk. I turn over the first part of the first part, to make the corners into the gaps at the same time.
7) turn over the workpiece, externally it will be similar to the discharge star.
8) Then we proceed again the corners in the gaps, as shown in the diagram.
9) And our asterisk is ready.
We offer you to watch videos, how to quickly make 4-finite drikes.
And also browse another video, how to quickly make 8 end suichen.
Paper transformer
We will also learn today in the Origami Suriken Transformer technique. This work will take a little more time, but what kind of beauty we will succeed at the end. We offer to view photos of this craft:
And now we turn to the same assembly scheme itself.
1) Take a color square sheet of paper and bend it in all three diagonals and extend back.
2) The upper corners are uniformly bend to the central line.
3) We fold the workpiece in half to get the figure, as in the picture below.
4) bend inside the left corner so that such a module is like in the picture.
5) and such billets we need to make eight pieces. It is desirable that they were two colors, that is, four, so it will be more spectacular to look like a snaps.
6) Take two billets of different colors, one with them will turn to the right to look at the double angle, and the second turn the same way, then it turns out a stupid angle. The single end of the right blank is inserting inside the left, the ends of which bend the way as shown in the figure.
7) It is necessary to do so with the rest of the blanks, not forgetting to alternate colors. We should have this figure.
8) But in order for our figure to become a transformer, you need the ends of the last workpiece to be bended as shown in the picture.
9) And now it remains small, it is necessary to move the opposite sides towards the center and the hole will no longer. So you need to do with all parties and then we will have such a snaps.
Video on the topic
So we learned to make the most famous stars of Syricen and Syricen Transformer. This information will be very useful for a boy's mom who wants to get such a toy. Make it together, and you will get a lot of positive emotions, spend a fun time together, and also very close, imagine how your son will be pleased with the fact that you are interested in the same topics as he. Therefore, be sure to browse the videos that we offer you below, and maybe you will answer your questions that arose during our master class.
In this article you will learn how to make the four-sided origami shuriken from paper with your own hands.
Origami Syricen of Paper
For the manufacture of paper shuriken, we need two dense multicolored square paper sheets.
The scheme below will be useful for beginners.
How to make origami shuriken scheme
To begin with, you must fold each sheet twice in order to mark the middle of the sheet, and then also folded every half on the sides of the middle line so that the edges of the paper are opposite the line and relate to each other.
- Then fold the obtained billets in half, the angles are lowered, as shown in the diagram. Once again we turn the paper in accordance with the image so that the edge of the paper concerned the edge of the previously wrapped corner.
- We do so on each side, the symmetric triangles should turn out.
- We have two figures that should look at the opposite sides if you put on the table.
One half put the triangles down, the other is top, but the triangles up. We clamp the corners of the lower module under the central edges of the upper figure, we bring them under the plane of triangles.
I turn over the product and in the same way along the fold line, we tailble the corners and refuel into paper pockets.
Origami Syricins Video
So we made a paper copy of Syricen with your own hands. If something seems incomprehensible in the diagram, see the video. In this detailed instruction, each step of making this decorative product is explained, which can be stuck in the air.
Article - origami genre
