Here you will find a master class how to make a bow with your own hands in Origami technique. The origami is quite simple for beginners. Despite the prostate it will look original on the gift packaging. Let's go to the master class.
First prepare paper for a bow. What does not necessarily use special paper for origami - you can simply take the bright pages of glossy magazines, which will attach a special flavor. Even ordinary newspaper pages can come up. Also good for origami crafts suits the usual color one-sided thin paper.
How to make a bow of paper
Very simply with the help of the scheme below we will make a bay origami. It all starts well enough - if you have already done any ordinary Origami crafts, then the first steps are all identical.
We take a regular sheet of paper A4 and cut off from it excess to all sides of the sheet be equal to magnitude. The resulting square sheet of paper must be folded in half, then deploy and fold in half in another direction and again deployed. Then folded together together two opposite angle, deploy and combine the other two opposite angle. As a result, a sheet should be a sheet with the lines of the bend "asterisk".
Now it is necessary to bend a leaf of the rhombic along the bend lines as it were connecting all four corners of the sheet together, the front of the bow in. And then bend from the received Rhombic, where the center of the square leaf, the corner passes.
Deploy and get extra folding lines in the center of the sheet. We begin to bend over these lines, very neatly, the square of the resulting sheet and the bends diverged from its corners. Then, just as the rhombus folded in the previous step we fold a sheet back, but the center of the sheet bend deep into the small square.
Bending the resulting edges as shown in the photo. First on one side, turn over and bend the remaining on the other. Now again you can deploy the resulting item. Check with the photo, you should have the same.
I turn around what happened on the wrong one. We need to be cut off, a stationery knife, bent edges marked in the photo with curved lines, to the fold line in the middle. Check with photos.
Now it became possible to bend the fourth part of the sheet, in order to bend the edges that have discovered to the line passing in the center. Then we flex the opposite direction and bend the opposite edges to the line in the center. There are such corners of the bent edge to the edge into a dense.
And those details that we rejected To bend these corners and leave bent in one direction. Their edges are necessary to be bent towards each other. And turn the craft. The edges of the corners need to bend off the angle to the center of the banta, one and the other. And then hide them under the center of the bow. The final stroke simply cut out the corner how the ends of ribbons have conventional bows, the edges of the details under the bow.
When us is a question of a gift, we always wonder how it is spectacularly present to surprise the person who is meant this present. Best of all, of course, it is to make it a beautiful packaging or a bright bow, which will attract attention. In order not to pay a lot of money on such a trifle, it can be done independently with beautiful paper, or as it is fashionable - with parchment paper, journal sheets or newspapers. And then still decorate the packaging with a beautiful bow, which can also be made independently. Therefore, today we will teach you how to make the origami bustle paper. This lesson does not take you a lot of time, but then this bow will be useful to you and more than once.
We try to start with a simple
Today we will learn how to make bows for packing gifts in Origami technique. That's what they happen.
They are done almost the same, only have different ends and different colors of paper.
We choose the color that will suit our gift or to its packaging, but not the same color so that it does not merge with the package, and in another shade.
Let us turn to the assembly scheme of a bow:
For this craft, we will need a square sheet of paper.
We put it down the main color, if it is not altooth. Fold it in half only so that the drawing is inside. And now we put again in half. We declare it back, and now the pattern is outwardly we put our sheet of paper diagonally, we turn over 90 degrees and fold it again diagonally. And reveal back. Now we need to adjust the right and left angle inside as indicated in the scheme. We fold the upper corner so that it turns out a small triangle. And again we declare our workpiece, now a small square of the folds should remain in the center.
Then we need a small square, which is located in the center, straighten your fingers forward so that all sides remain a little behind. Next, bend the sheet as shown in the photo, only that this square is inside the workpiece. Now we need to bend the upper sides, as in the scheme, and then turn over the workpiece, and get the other top sides. And reveal our workpiece again so that the center is the square and smooth out very well all the folds.
I turn over the workpiece so that the color side is down. We use scissors and make four cuts along the folds. Now you need to fold down the top outdoor fold, and the two upper angle are also folded down to the middle, these will be the tips of our future bow. Next, we run up both rhombus, and we only fold the lower corners to the midline. Now we need to lower down the double part in the form of a rhombus. And make a small incision, as is done in the photo, and adjust these parts.
Now turn the bow to the face. Come in with two extreme corners to the center and insert them into a small square, which is located in the middle. Here is our gifts for a gift and ready. It can also be used for the decor of the room, the holiday, they can also be decorate a Christmas tree.
You can also make such a bow. It is much easier and faster.
Form butterfly
In this technique, we can make a bowtie bowl, which can also decorate any gift. Let's see what they happen.
And now we turn to step by step instructions and start doing our bow bow.
Take a rectangular sheet of small paper, about 20/8, but the size you have the right to choose yourself. I will drive it in half and distinguish back, while noting the central line.
Now we add all four corners of the workpiece to the center line, as shown in the diagram.
We fold in half the upper and lower aspects of our rectangle to the central line.
And now bend in half the whole workpiece.
On the other side, which remained smooth, we plan two angle from above and below.
These outlined angles bend inside.
Now this part of the workpiece bend on the left side. And repeat, too, with the other side.
Then you need to fold two corners to the center line, first on the one hand, and then on the other, all this is shown in the diagram.
And we fold two folds to the central line on both sides.
The place that is indicated in the circle scheme means that you need to keep it, you need to turn right.
And then bend inside, and here is our bow butterfly and ready. It can be folded with an ordinary white office paper, and then paint it yourself, but you can add right away with beautiful colored paper.
Video on the topic
Now we suggest you view a selection of videos in which it describes in more detail how you can make a bow and bow-butterfly bow.
A gift is nice not only to hand, but also get. Today, great many different decorative ornaments - birds, butterflies, hearts and other cute little things. Someone prefers to decorate gifts with huge bows, someone with modest bows. There is a matter of taste as they say.
Well, if you prepared in advance, for example, to whose names and managed to pack a gift. But what to do if there is no such possibility? In this case, I will show how to make a paper bow with your own hands, in the Origami technique. It will be an original bow for stylish decoration of your surprise.
All we need is:
- paper with a pattern of square shape
- scissors
How to make a paper bow with your own hands:
If you all armed with all this, you can proceed to business.
We take a sheet of paper. 
Sheet of paper fold in half the same and second time. 
Also add diagonally. 
After that, bend the corners inside the triangle and get a rhombus. 
We drive the top corner. 
We deploy our shape and get a small square inside the square, I designated it with a dotted line. 
Now the central square we fold along the fibe lines as indicated in the photo below. 
Side parties we put on the edges on the one hand. 
Then on the other hand. 
Deploy the figure face to yourself. 
Invert the figure on the wrong side and cut over the folds of the bend, which are indicated by the dotted line. We will have four diamonds. 
Lower the upper rhombus on the bottom and we will work with the side. 
The upper corners of the side rhombuses bend to the center of the bend. 
Raise the bottom and upper rhombus up. 
The lower corners of the side rhombuses also fold to the central line. 
Reduce the lower and upper rhombus again, and we fold the side corners as follows. 
Scissors cut a folded rhombus in the middle. 
Bend in different directions. 
I turn the born face to yourself. 
Sharp corners of a bow hide in pockets. 
Sut off the extra "ribbons". 
Origami Battle of paper is ready. Now you can safely decorate your gift to them. Believe me, with such a bow, he will look excellently. 
Origami Bows is one of the most popular origami from paper. If you do not know how to make a bay origami, then on this page you will find everything you need to assemble this simple paper figurine.
The first photo shows a simple example of origami origami bounties. Make such origami is completely simple, especially if they arma the assembly scheme of the preceded below. A more difficult band of a bow can be seen on the second photo. This photo origami Banta came to us by mail. If you have examples of Origami works, send your photos to us on: This email address is being protected from spam bots. You must have JavaScript enabled to view.
Assembly scheme
Below is the assembly scheme of the origami bow from the famous Japanese master origami Fumiaki Schingu. If you are clearly followed by instructions, the assembly of the origami bounty will not take much time, and the result will be the same as in the picture. Having described in the scheme several times, you will understand how to make the origami bow quickly and without peeling into the scheme.
Video master class
Collect the origami bow for beginners may seem a challenge. Therefore, we advise you to introduce the request "origami Battle Video" on the largest video hosting of the Internet YouTube. There you will find many different videos about the origami bow, which clearly shows the actions on the assembly of a bow. We hope that after watching the video, the master class on the assembly you will not have more questions, how to make a bay origami.
But a video lesson on how to make a more complex origami in the form of a bow:
If anyone needs origami a bow forward, then here is a video that will teach you how to do it:
Symbolism
Currently, the bow is usually associated with a gift. However, this is also an important symbol of style. In ancient times, the bow was a frequent decoration of not only female, but also a male image. Also in some cultures, the bows were symbols of love.
Often, the decorator ideas require the use of a conventional paper bow. There are various options and techniques, but today this article discusses two master class after studying which you can choose origami a paper bow. Scheme, template and video for folding are provided below. Thanks to this material, we will step by step by the origami bows.
To date, the decoration in the form of a bow is a symbol of any present. Also, this element symbolizes a certain style that came from ancient times, it is used not only as female, but also as a male accessory. Some nations believe that the bow is a symbol of love, since when tied it with ribbons, an inverted eight is turned out, which symbolizes infinity. So how to make a bow?
Consider the step-by-step instructions for the manufacture of origami a bow, the lesson is not complicated, the description is simple even for beginners. Such a bow can be decorated with a box for cake, candy or a postcard.
Before starting work, it is necessary to prepare the material. What does not necessarily use special paper for Origami technology - take sheets of bright pages from any glossy magazine, it will give a special color to the craft. Even a regular newspaper page.
One-sided or double-sided colored paper is used, the best size of the sheet is 8 to 8 cm, although other dimensions are not excluded. We turn directly to the phased master class, which will teach the origami bow. Folding scheme is provided below.
- Put the paper sheet to have a color side at the bottom.
- Fold it in the middle.
- Again, roll twice, but transversely.
- Expand the leaf. The resulting figure is divided into four equal elements.
- Further turn the blank diagonally. Received on paper the hall in the form of a beech "x".
- In the races, bend the leaf, as shown in the photo.
- Upper corner. Bend one centimeter on yourself.
- Expand the product again. From the inside of paper leaf turned out a figure in the form of a small square.
- Pretty joining the bends and diagonals of this workpiece.
- Next, drive the square in addition to getting such a form as in the photo.
- It turned out a two-layer blank.
- From above, beaten, directing them on yourself.
- Turn over the product, repeat the same thing.
- Turn over the wrong side, cut the paper sheet carefully, as shown in the photo. It turned out the tapes of a bow.
- Do not rush to expand, it turns out such a workpiece, which was not difficult to fold.
- Then bend the top tape on yourself, look at the photo, how to fold the side parts. Do so from the same side.
- Bantian's tail Cut in the center by starting the edges.
- Turn the product to face.
- Build the edges of the bows are at the center, insert into the square.
- Tapes can trim at their discretion, if you leave it, it will also be not bad.
First handicraft master class origami Bows ready! You yourself were convinced that in detailed instructions and step-by-step photos from paper do it is not difficult, quickly and simple.
Video MK Crafts Origami Banta
Making a bow tie according to the scheme and video lesson
This MK is also not complicated and designed for a beginner public. Let's proceed.
We will fold the bow tie from a paper rectangle using the Origami technique. To work, take a strip of 21.5 to 9 cm in size. If a longer strip is used, but such a width, then the "ears" products will be a little longer. If the sizes approached, then make a bow large or smaller, but change the parties proportionally. In addition, you can experiment with various sheets of paper, here the rules do not exist. 
Step-by-step instructions for this master class Look in the video material provided below.
