How to clean mink coats in dry cleaning. How to clean a mink fur coat at home

Sooner or later, any thing gets dirty, no matter whether it is a dress or a mink coat. It is quite easy to deal with dirt on the dress, but to clean the mink at home, you will have to make more effort and ingenuity. Of course, you can always just take a fur coat to the dry-cleaner, but there is a high probability that the product will be spoiled there, and the cost of such a service is not cheap. Therefore, in most cases, fur cleaning can be carried out at home using the simplest means. The most important thing is accuracy and strict adherence to the instructions, because any fur product requires respect for itself.

How do you know if it's time to brush the fur, or postpone it?

First, it's worth checking if your coat needs deep cleansing, or you can do with combing and airing.

Take the product in your hands, bring it to your face and blow until a funnel forms, so that the skin is visible. Shake gently. If there is no trace of your actions left, and the fur lies flat again, smell it. The absence of even a faint unpleasant smell will tell you that the fur does not need additional cleaning, so just comb it and hang it for ventilation, away from drafts and heating.

The fur has lost its luster, has become noticeably crumpled, has lost its splendor and color - these are sure signs that it is time to clean it. But even if there are no obvious signs of contamination, the sheepskin coat should be cleaned after a long off-season storage, this will "wake up" and refresh it.

Stages of cleaning mink fur

Mink fur cleaning involves two stages - a mechanical cleaning stage, and a stage deep cleaning using chemicals.

Mechanical cleaning, i.e. dry, made by thorough brushing, which removes the fallen hairs, lumps, hairs. Mechanical cleaning is aimed, most often, at smoothing the pile, and does not give such a noticeable result as chemical cleaning.

With chemical, or wet, cleaning at home, various cleaning, washing chemicals will come to the rescue. Such cleaning is deeper and more effective, but, at the same time, it can cause irreparable damage to your mink fur, if it is neglected and inconsistent.

Effective methods of cleaning your mink yourself

At home, you can quickly and efficiently use many ways to clean your mink fur yourself. But, in any case, it is worth acting very carefully and carefully, because the skins of these animals are a capricious thing, and they will not tolerate negligence.

The most common, but no less effective, is such a method of cleaning animal skin as semolina. This method is suitable if the fur coat is dusty from long socks, or "tired" of hanging in the closet. We lay out the fur coat on a hard, even surface, and sprinkle the most dirty places with dry semolina (usually the dirtiest places are the sleeves, collar and the area of the pockets). Then, with light movements, we simulate a regular wash for 30-40 seconds. Shake the product and comb it out with a special brush.
Cleaning with starch is the same as cleaning with semolina. The color of the starch will tell you how dirty the fur was. It is worth repeating cleaning with starch until the shaken off powder remains white - this will serve as proof that there is no more dirt and dust left.
Hot sand cleaning is also a gentle cleaning method for mink products. To do this, you need to take fine washed sand and heat it in a dry frying pan. Carefully lay out the mink fur garment on a flat surface and sprinkle the most contaminated areas with hot sand. Wait until the sand has cooled down, gently comb out with a soft brush. If the sand is not combed out completely, lift the product and shake it vigorously several times.
Another way to renew mink fur at home is brushing it with gasoline. Gently, gently pressing, comb out in the direction of wool growth. Cleaning with gasoline is dangerous and should be done away from fire and in a well-ventilated area. After processing, be sure to take the product out into fresh air for several hours to thoroughly ventilate it. But, if your fur coat is made of light material, this method will not work, since gasoline gives a yellowish tint.
Cleaning mink fur with vinegar is also common. A 5% solution of table vinegar is prepared, then a cotton pad is moistened in it, and the product is processed in the direction of growth. The dirt will remain on the disc, and the fur will sparkle with new colors.
If you need to peel light furs, then instead of the vinegar from the previous recipe, use hydrogen peroxide, also 5%. Change the disc after each treatment, and after wetting, be sure to squeeze out - if it comes into contact with the skin, the solution can ruin it and cause the formation of bald spots.
Also, mink fur can be cleaned with the most ordinary ammonia... To prepare a solution of the desired concentration, you need to take 4 tablespoons of water and one spoonful of alcohol and mix well. Then you can moisten a cotton swab and process according to hair growth. Dry in the open air, never on a battery or heater.
For tough dirt, prepare hardwood sawdust, mix with a little clean gasoline and apply gruel. After a while, gently comb out with a soft brush.
You can also clean the mink fur with regular hair shampoo. We dilute it in water, whipping up a thick foam, and then apply this foam with a sponge. We stand for several minutes, comb out thoroughly and dry.

You can also remove tea, coffee or juice stains with a soapy solution and a soft brush. And a stain from lipstick or foundation can be removed with a thick napkin dipped in rubbing alcohol.
After any method you use, dry and air the cleaned product outdoors only, away from heating elements and drafts. Never iron!
After a long rest, fur products need a “walk”. After removing the fur from storage, shake it, hang it on a hanger and hang it outdoors for about an hour or two. Then comb the product - it will shine and freshen up.
If you want to give your hat or coat your favorite scent, do not sprinkle perfume on the fur. Apply the perfume on a special brush and comb the coat - the scent will last long and bright.

Mink fur at all times was the most status, expensive and fashionable. After all, it is not only beautiful, but also relatively durable - with careful and gentle wear and proper care, it can serve you for ten to twelve years. That is why an elegant mink coat or a chic mink coat was, and still is, the dream of many women. And, if your dream is already on your shoulders, then with a little work, you can extend the life and beauty of this wonderful soft fur.

Clothes have an unpleasant tendency to get dirty during wearing. When it comes to T-shirts or trousers, they are easier to clean than, for example, a mink coat. All fur products require careful care and certain precautions. Mink is not as easy to clean as it might seem at first glance. At the slightest non-observance of the instructions, there is a risk of irrevocably damaging the product.

Mink cleaning with sawdust

If we talk about manufacturing enterprises, mink products are cleaned there with sawdust. The method is effective, so take a closer look at it first.

You will need sawdust and rubbing alcohol, respectively. Sawdust is best purchased at pet stores, they should be from oak, aspen, maple or linden.
Prepare a container, send sawdust into it and pour it over with alcohol. From some sources you can find out that gasoline is suitable for filling. But after it will persist bad smell for a long time.
Mix sawdust with rubbing alcohol. Place the fur garment on a table or other flat surface. Sprinkle with the prepared composition.
Carefully begin to wrinkle the fur with your hands so that the wood absorbs all the dirt during the manipulation. Then shake out the fur coat, comb it with a special brush for fur products.

Shampooing the mink

Often stains appear on fur products that need to be eliminated first. In this case, sawdust will not help; a cardinal approach is required.

Choose a shampoo with maximum moisture so that the product does not dry out the skin of the product. Prepare a bowl of water at room temperature or bring the liquid to a maximum of 30 degrees.
Pour in a cap of shampoo and stir by hand. It is important to get a dense foam. Take a second container, fill it with clean (soft) water without impurities.
Spread the fur coat on a flat surface, arm yourself with a sponge. Dip it in the solution and walk over the area of the fur that needs cleaning.
Do not wet the fur too much, so that later the fur coat does not become too wet. Try not to touch the leather part at all.
After wiping, walk with a clean cloth soaked in warm water. Then, get rid of the moisture on the fur coat using a paper towel or napkins.
Finally, brush the fur with a fine comb or a special clothes brush. Leave the coat to dry on a hanger in a well-ventilated area.

Sand cleaning of the mink

The method is environmentally friendly and safe. Follow the instructions to clean your mink coat.

Collect the river sand, then rinse it several times under the tap. In addition, pour boiling water over, let the excess moisture drain.
Prepare a skillet, put all the sand in it and heat it over a fire to a temperature between medium and high.
Spread the mink coat on a flat surface, sprinkle with warm sand. Only touch the dirtiest areas of the product.
Wait until the sand reaches room temperature. Then shake the fur coat and comb it.

At home, you can clean a mink coat using ordinary powder, or talcum powder. The composition is famous for its ability to absorb excess dirt and grease. This method will be especially effective for white mink.

Before you start work, arm yourself with thin medical gloves... Select a flat surface and spread the fur on it.
Sift the talcum powder, then sprinkle it on the entire fur coat with contaminated areas. No need to lay out the powder, as they say, with a slide. Just work on the pile carefully.
When the powder covers the entire fur coat, start slowly rubbing it into the surface. Then remove the product to fresh air and shake gently.
You can additionally work on the thing with a hairdryer using cold air. So the powder is quickly blown out of the cavity of the product. At the end, comb the fur coat.
Talc can be purchased at a pharmacy. But if you don't have the option, use regular corn starch or potato starch. The processing technology is identical. The main thing is to comb out the fur coat well at the end.

Mink cleaning with semolina

Semolina belongs to those inexpensive food products that are also widely used in everyday life. Choose a quality composition and follow the instructions.

Semolina restores shine to the fur coat and perfectly absorbs dirt. To start manipulating, select a flat surface and spread the product.
Semolina copes with dirt on pockets, collars, cuffs. It also removes the yellowness that often appears on white furs.
Sprinkle the soiled areas with dry semolina and rub gently with your hands without applying strong pressure. After that, shake out the wardrobe item well and comb the fur coat.

How to clean stains from a mink fur coat

All of the above methods, with the exception of shampooing, are dry treatments. To remove stubborn dirt from the surface of a fur product, you will have to resort to the wet method.

Soap solution

Pour 30 degrees water into a basin, add a little baby shampoo or liquid soap... Whisk until lather.
Spread the mink product on the table, dip the sponge into the solution and walk over the dirty areas.
Do not wet the leather part in order not to provoke dampness. After cleansing, treat the fur coat with a damp clean cloth, comb the fur.

Table vinegar

The solution is used to make white and dark fur products shine. Arm yourself with a vinegar concentration of no more than 6%. Soak a cotton swab in it and squeeze.
Spread the item on the table, carefully go over the spot with the stain. If the fur is short, move against the fur. For a long movement, they are carried out according to growth.
In order not to harm your favorite product, be sure to wring out a cotton pad. The vinegar should not penetrate the skin of the fur coat.

Gasoline for lighters

Gasoline for refueling lighters is considered the cleanest, therefore it is suitable for removing difficult dirt from a fur product. This option is only suitable for dark fur coats.
Moisten a brush for clothes, then comb the thing with it. Do not exert strong mechanical stress, move with a "light hand".
Finally, leave the fur coat in the fresh air to ventilate. Most importantly, avoid exposure to direct UV rays. Otherwise, stains will appear on things.

Cleaning the lining of a mink coat

Often, after the season of wearing a fur coat, the fur remains practically clean, which cannot be said so about the lining. To manipulate maximum benefit, it is recommended to unpick the fabric. Use a special tool, do not damage the product.
After careful manipulation, stretch the fabric. Determine the type of lining in advance and set the appropriate mode on the washing machine. If the fabric is made of polyester or silk, the temperature should not exceed 40 degrees.
If the lining is cotton, the temperature may be higher. After washing, the product must be thoroughly rinsed. This way you can avoid streaking when drying. After the last step, iron the fabric well and carefully sew it back onto the fur coat.
Not everyone decides to take such a crucial step. If you doubt that you can sew on a lining with high quality, clean it on the fur coat. Consider, in this case, the manipulation must be carried out with extreme caution. In no case should you wet the bottom of the fur coat.
To thoroughly clean the lining, it is recommended to soak the sponge with foam and distribute the soap composition over the inside of the fur coat. Next, the fabric must be cleaned with a clothes brush. The soap solution is removed with a damp sponge. Then blot the lining with a cloth.
Hang the fur coat on a hanger in a suitable place, while keeping it at room temperature. Keep in mind that there should be no high humidity in the room. It's not a secret for anyone that in wet weather in winter the fur coat gets dirty at the bottom the most, so it is recommended to sew an additional lining in advance.

Precautions

In order not to spoil an expensive product, it is important to adhere to simple recommendations.

Remember, the fur coat should never be washed. As a result, the fur will irrevocably deform and deteriorate.
Do not try to dry the product near batteries, open flames and heaters. Fur also deteriorates.
If you are in adverse weather conditions and your fur coat gets wet, hang it on a hanger. Dry the product in a room at a natural temperature.
Do not try to iron the fur, even at the lowest temperature. In any case, you will not be able to get rid of strong folds without consequences.
It is strictly forbidden to store the product folded. If this has already happened, hang the fur coat on a hanger. After a while, she should stretch out.

Clean fur only as needed. Look at the degree of contamination of the product. From frequent dry cleaning, the pile loses its original structure and begins to crumble. Get in the habit of using the services of professionals.
Average mink coats withstand up to 5 dry cleanings. It is forbidden to keep a fur coat in plastic bags. Such material strongly electrifies the pile. In addition, the fur deteriorates due to lack of oxygen.
Every time you leave a thing for long-term storage in a special room, make sure that there are no pests. So that the fur coat does not suffer from various insects, it is recommended to treat the room with special agents.
IN people's councils a simple newspaper has proven itself well in pest control. Stuff the sleeves with paper, printing ink repels insects (moths). In addition, the fur coat will keep good shape... It is forbidden to store other fur items nearby.
Remember that fur products are excellent at absorbing various odors. Therefore, the room must be thoroughly ventilated before storage. You can put a special bag with pleasant incense in the room.
It is forbidden to spray perfume on a fur coat, stains often remain from a cosmetic product. The latter cannot be removed even with dry cleaning. Do not try to constantly carry the bag on your arm or shoulder. In this place, the fur will simply wear off soon.

If your mink coat is not too dirty, use dry cleaning methods. In this case, semolina, fragrance-free talc, hot sand are suitable. To remove complex contaminants, you will need sophisticated artillery in the form of gasoline for refueling lighters, vinegar solution, shampoo with water. Be sure to take precautions when working with a fur product.

Video: cleaning a white mink coat

A mink coat is not a cheap thing, therefore, safe cleaning methods have always been of interest to its owners. Fur requires a delicate attitude, people do not always run the risk of giving a fur product to dry cleaning, as they are afraid that the craftsmen will ruin it. In addition, dry cleaning services are expensive. Therefore, in some cases, it is advisable to resort to household methods of cleaning mink products.

By implementing proper care for a mink product, you can ensure its service up to 12 years. Too often, the mink does not need to be cleaned; this must be done as it gets dirty. The time when you need to clean a mink coat can be determined by external signs:

Dust deposits;
Numbness;
The hairs stick together, which is why the fur loses its splendor;
Fading of the fur;
Dirt on the hairs.

When purchasing mink products, do not forget to purchase a special brush with metal fibers, which will come in handy when cleaning fur.

Methods and recipes for cleaning mink products

When cleaning a fur coat, it is important to remember that any careless action will damage the clothes. You cannot wash your fur coat, it will shrink and shrink. Mink coat can be cleaned in two ways: wet and dry. In this case, funds are used that are always available in the house.

Wet cleaning a mink coat is a more effective method, suitable for removing deep dirty spots... Before cleaning, the mink coat is placed on a hanger in an upright position. After cleaning, the fur coat must be combed with a special brush and allowed to dry.

When drying, do not use a hairdryer or iron!

Shampoo, gel, soap solution

Heated soapy water is one of the most common methods for cleaning minks. The number of components is taken from the calculation of the volume of the fur coat. The longer and larger the fur coat, the more solution you need to clean it. Dissolve 100 ml in a bowl of warm water. shampoo, shower gel, or regular laundry soap. Moisten a sponge in the solution and gently wipe the hairs of the fur coat with it, from root to tip. You can fix the pieces of cotton wool on the teeth of the comb, and, dipping it into the solution, comb the fur coat.

Vinegar and hydrogen peroxide

5% vinegar very well cleans mink products from dirt, restores its original shine. If you need to tidy up a white fur coat, then the vinegar is replaced with hydrogen peroxide.

Petrol

Aviation gasoline or lighter gasoline is used to clean the collar as it gets dirty faster than the rest of the garment. Traces of perfume, creams, lipsticks often remain on the collar, which are very difficult to remove. Gasoline is mixed with burnt magnesia, which can be purchased at the pharmacy, to a mushy mass. Apply the gruel to the contaminated area, wipe it against the lint. After drying, comb the fur thoroughly and rub with 5% vinegar.

You cannot clean light fur with gasoline, otherwise it will turn yellow!

Ammonia + salt

In a glass of warm water, dilute a tablespoon until completely dissolved table salt, add half a teaspoon of ammonia. Wet a soft cloth or gauze in the mixture, clean the fur coat with pressing movements.

Alcohol or vodka

In the following way, the fur coat is cleaned of dirt and dust, in addition, after treatment with alcohol, the former shine returns. Add 5-6 drops of alcohol and 1 drop of cleaning agent to half a glass of hot water. Stir the mixture thoroughly, then clean the fur coat in the direction of the pile with a cotton swab dipped in it.

Dry cleaning

This is a more gentle cleaning method, suitable for removing shallow dirt.

Starch

Place the fur coat on a smooth, flat surface, for example, on a table. Then sprinkle with potato starch, carefully rub the surface of the fur coat with it. If the starch becomes dark, repeat the procedure. After processing, shake off the fur coat well.

Talcum powder or tooth powder

Tooth powder, talcum powder, or regular baby powder are excellent home remedies for cleaning a mink coat. They are cleaned with tooth powder in the same way as with starch.

Sawdust

The pet store sells hardwood sawdust. A small amount must be mixed with regular clean gasoline. Apply a mass to the fur, rub it with your hands, then shake it off, comb the fur and treat with vinegar.

Semolina

Semolina is used to clean a fur coat in the same way as with starch, but there is another way to clean it. Boil a tablespoon of semolina in a glass of milk. Apply the cooled porridge to the fur coat in thin and even layers and leave for 6 hours. After that, it is good to clean the fur coat from semolina, comb it and dry it at room temperature.

Hot sand

Heat fine, well-sifted sand, then sprinkle on the fur. Rub it with your hands, remembering to change the dirty sand to clean. Repeat the procedure until the fur coat is clean.

How to clean a mink coat: video

You can see with your own eyes several simple ways to clean a mink coat, suitable for home conditions, by watching the video:

Specialists in the care of fur products will explain and show you how to clean a fur coat without resorting to dry cleaning services. Also, by watching this video, you can learn how to check a fur product for contamination.

How to clean vomit from a mink coat

If it so happens that the fur coat gets dirty in the vomit, you do not need to despair, you can clean the fur coat in three stages:

Clean the stain by hand or with a dry brush. Then sprinkle with starch and grind thoroughly.
After removing the starch, clean the stain with soapy water.
Dry the fur coat, remove the remains of starch and soap particles with a clean cloth. Comb the fur coat.

How to restore shine to fur

Unfortunately, having lost its luster, a mink product also loses its presentable appearance. In addition to cleaning from dirt, it is sometimes necessary to carry out procedures that will return the fur coat to its original shine. You can freshen up your fur coat by rubbing the fur with the following means:

Chopped walnut kernels;
Glycerol;
Vinegar;
Petrol;
Starch;
Hydrogen peroxide (for light-colored fur coats).

After treatment with one of these substances, comb and dry the pile.

How to clean stains from a mink coat and hem

The hem of a long fur coat is a very vulnerable spot, as there is always a risk of getting it dirty, for example, getting into a car. In addition to gasoline, alcohol and ammonia, you can remove stains from the hem in the following ways:

Rinse potato peelings, twist through a meat grinder, add a few drops of ammonia. Apply the resulting gruel to the fur and wipe it with a brush.
Boil rye or wheat bran. Spread the resulting mass over the spot in an even layer, grind thoroughly. Repeat if necessary.

How to get rid of dusty, unpleasant odors and restore freshness to fur

Fur is capable of absorbing and retaining many aromas for a long time. Imagine your fur coat absorbs the smells of food, perfume, cigarettes, day after day, public transport... When these odors are mixed together, an unpleasant, long-lasting composition is obtained. You can get rid of unpleasant odors in the following ways:

Regularly clean the product from dirt and dust.
In winter, take the fur coat out to the balcony and leave it in the cold for a couple of days. Everything unpleasant odors will freeze out. If it is not possible to freeze the product on the street, then it is carefully folded and placed in the freezer.
In the summer, dry the fur coat several times in a cool dry place without exposure to sunlight. Store the fur coat hanging on wide hangers so that it does not come into contact with other items of clothing. Instead of a polyethylene cover, a fabric cover is used. Place the coffee beans in the pockets. But remember that coffee masks odors, not removes them, so the coat must be perfectly clean!
Remove odors from vinegar, gasoline, alcohol, ammonia.
They absorb all the smells of starch, semolina, flour.

How to clean a white fur coat

White fur looks very gorgeous, but the attitude towards it should be careful and delicate. Any contamination immediately becomes noticeable on a white fur coat, so it has to be cleaned more often than a dark one. In addition, white fur can turn yellow over time, which is why appearance the fur coat immediately becomes dull. There are a few simple ones, but effective ways cleaning white fur:

The sawdust is mixed with gasoline or alcohol. The mass is applied to the fur, thoroughly rubbed, and then removed. The fur coat needs to be combed and ventilated.
Bulk substances: semolina, starch, talc, tooth powder, flour. One of these means is rubbing the fur. The degree of purity is indicated by the color of the product.
Hydrogen peroxide is poured into a spray bottle, then sprayed over the surface of the fur. Also, hydrogen peroxide is mixed with one of the bulk products and a monotonous gruel is obtained, with which a fur coat is cleaned.

After cleaning with semolina, starch or flour, it is necessary to shake off the fur coat very carefully so that no particles of funds remain between the villi. Otherwise, when wet, they will swell, and the quality of the fur coat will deteriorate.

How to clean the lining

Like a fur coat, the lining also gets dirty and needs cleaning. The first option is to clean the lining along with the fur coat, and then dry thoroughly.

The second option is to rip off the lining, wash it in a warm soapy water manually or in a washing machine with a delicate mode, remove the existing stains with ammonia. The lining is dried naturally, ironed and sewn into place with neat, inconspicuous seams. When worn out, the lining can be easily replaced in a tailor shop or by yourself if you have the sewing skills.

Review of professional natural fur care products

When people buy a fur product, it is assumed that it will be worn for more than one year. Therefore, it is advisable to buy and professional tools for the care of fur products. Products from the manufacturer "BIOFUR" are very popular.

Fur products never lose their relevance. Careful attitude and regular proper care will help you to look fashionable and chic in your favorite mink coat.

To clean a mink coat, it is necessary to correctly determine the method of cleaning, this will help to avoid damage and restore the natural shine of the mink. Important points of choice are the type of pollution and the color of the fur.

Loss of color and attractiveness occurs as a result of the accumulation of dust and fine debris among the lint, as well as the appearance of other types of contamination. Their detection indicates the need for cleaning.

From the dirt

The easiest way to remove dirt from a mink coat is dry cleaning. First, the product must be hung on a hanger and dried thoroughly at room temperature. At the same time, it is not recommended to use heaters, this will only worsen the situation. When the fur is dry, you need to arm yourself with a special brush and comb it in the direction of the pile. After the final shaking, the fur coat will be rid of dirt and will return to its original appearance. If you are worried about dust and unpleasant odors, you can use semolina:

the product is laid out on a flat surface;
sprinkle generously with cereals;
then wipe thoroughly with a brush;
leave for a quarter of an hour and finally shake.

More difficult stains are removed by damp cleaning with soapy water. Laundry soap shavings must be diluted with a small amount of water and brought to a homogeneous state by stirring. Alternatively, you can use thick detergent... The sequence of actions is as follows:

moisten the brush in the solution;
wipe contaminated places;
Remove residues of the product with a dry napkin.

After the cleaning procedure, the mink coat will need to be dried and combed along the pile. In addition to the usual dirt, this method will be effective for traces of juice, coffee and tea stains.

From fat

When there is greasy stains on a mink coat effective means there will be talcum powder or starch. They absorb fat well, with skillful use, they completely remove traces of it, help from odors. The procedure is recommended to be carried out with rubber gloves:

the fur coat must be laid out on a horizontal surface;
sprinkle talcum powder on all fat spots;
lightly rub in the agent in places of contamination;
then shake off the powder and comb the fur.

When using starch, you should be especially careful, carefully remove it after cleaning. Otherwise, when moisturized, it will further damage the fur.

In difficult cases, you can use more radical methods:

a solution of 6% vinegar, medical alcohol and water is mixed in equal proportions and applied with a brush or sponge for half an hour;
a cotton pad moistened with ammonia, mixed with water in a ratio of 1: 2 with the addition of a teaspoon of salt, treat the fur along the pile;
purified gasoline, using a cotton swab, disc or cloth, is applied to the stain until completely removed.

After cleaning the fur, wipe the mink coat with a dry and clean cloth. Remains of odors are removed by ventilation. Vinegar, alcohol or gasoline can negatively affect the condition of the fur, so it is better to first check the reaction in subtle areas.

From yellowness

The main cause of yellowness is sunburn, abuse becomes another factor. essential oils and perfume. There are several simple and affordable ways to help get rid of this defect.

For white color, sprinkle with hot wheat bran is used:

the bran is preheated in a saucepan with constant stirring;
clothes are laid out evenly on a horizontal surface with the pile up;
then sprinkled with hot bran and scrubbed.

the ingredients are mixed until a thick, homogeneous gruel;
the mixture is applied to the place of pollution;
after drying, the product is swept away with a brush, the fur is combed along the pile.

Another method involves mixing gasoline with sawdust, the mixture is used in a similar way.

Many small stains on the mink coat are cleaned with a mixture of shampoo, soap and powder, which should not contain dyes:

the components must be mixed in equal proportions;
spread the product on a flat surface;
apply the solution to a soft sponge and gently clean the pile;
after removing stains, the fur must be combed with a special brush.

You can quickly remove yellowness with a solution of ammonia and peroxide: add a teaspoon of peroxide and a few drops of ammonia to a glass of water. The moistened cotton wool is inserted into a wide comb and the product is brushed along the pile.

By color

It is necessary to select products for the care of a mink coat, especially at home, taking into account the color of the product. Solutions that successfully clean dark fur can be harmful.

White (light)

This extremely easily soiled product must be cleaned with dye-free formulations. Dry cleaning with talcum powder or powder is suitable for this purpose, and even wet cleaning if you take solutions based on peroxide or ammonia.

The fur coat is laid out on the table, the places of contamination are sprinkled moderately with talcum or powder, after a few hours the product is removed along with the dirt, then the pile is combed.
A tablespoon of peroxide is diluted in a liter of water, cleaning is carried out with a moistened and wrung out cotton pad, with a long fur, moving along the pile, with a short fur - against.
A tablespoon of ammonia and three of the same tablespoons of salt are dissolved in 1 - 2 liters of water and the fur is cleaned in a similar way, after drying, combing is performed.

When using peroxide or ammonia, the solution should not be allowed to get on the base, this can lead to a mink coat and the impossibility of further wearing it.

Blue

You can restore the color, remove stains from a blue-colored fur coat with the help of blue. The product must be mixed with water until a light blue hue is obtained. Carefully process the pile with a dampened sponge, dry it, then comb.

Black

Most of these methods are suitable for removing stains and other dirt from a black mink coat. However, a recipe using bran and walnuts will be the most effective to restore shine. First, cleaning is carried out with bran heated to 65 ° C, until all contaminants are completely removed. After that, the walnut grains are crushed to the state of flour, tied in a gauze bag and the pile is treated with it from root to tip. The oil released by the walnut will give the product its original shine.

How to clean a mink coat in dry cleaning

If there is any doubt about the effectiveness and safety of self-care methods for mink, it is best to contact a dry cleaner. Professional cleaning of such a fur coat is done in two ways.

Processing with a special organic solution.
Deboning with sawdust or organic granules. This will get rid of stains, yellowness, remove scuffs on a mink coat with minimal risk of damage.

To insure yourself against marriage and defects, you need to describe in detail the condition of the product in the service agreement, indicate the contamination that needs to be eliminated.

Cleaning a mink hat

Most of the above methods are suitable for a mink hat. But the most effective and safe will be cleaning with shampoo for fur products:

a small amount of shampoo is poured into the basin;
pour water, foaming the composition with a shower head;
with a sponge dipped in foam, the fur is cleaned;
remove excess foam with a clean and slightly damp sponge.

As an alternative to special shampoo, you can use wool shampoos or liquid soap.

Questions and answers

Can a fur coat be cleaned with carpet and upholstered furniture cleaners?

The listed compositions are suitable only for artificial fur, its natural counterpart is too sensitive. It is better to dispense with other means with a more delicate action.

Why is it better not to use semolina when cleaning a mink coat?

Semolina is a good abrasive of natural origin, therefore it is recommended for mink care. However, with such cleaning, care should be taken to remove each grain. Remains of cereal can become limp under the influence of moisture and damage the condition of the fur.

Is it possible to steam the fur if it is wrinkled?

Wrinkled fur is a common occurrence, usually the result of long and careless storage. It is better to try to correct the defect in a natural way, that is, let the product hang down, then comb it with a special brush. But, if this does not help, you can use steam treatment, while the pile should not be allowed to get wet, the distance to the steam source should be at least half a meter.

Sooner or later, the question of cleaning it arises before the mistress of a fur product. If you do not have the funds to give your fur coat to the dry-cleaner or you are afraid that it will ruin you there, then you can use in simple ways, which will help to put your favorite fur product in full order. How to clean a fur coat at home so that it is not offensive for the result?

How to clean a fur coat at home correctly?

Photo by Shutterstock

In no case should you wash the fur or wet it with water. It is recommended to dry the fur coat in a well-ventilated area, away from drafts and air heaters. Drying by heaters, a hair dryer or over a fire can have negative consequences. It is strictly forbidden to iron a fur product; if you hang the fur coat on a hanger, it will soon straighten itself out.

It is necessary to clean the fur coat in the following cases: if the color uniformity is lost; there is dust contamination with a coating; there are debris between the pile

Ways to clean a fur coat at home

Before cleaning the fur coat, the product should be carefully knocked out to get rid of dust and possible particles of debris. Next, you need to peel the potatoes. Rinse them thoroughly under running cool water, chop them in a blender or pass through a meat grinder. Add some ammonia and stir. Apply the resulting gruel to the fur, rub with a brush in the direction of the pile growth. Then remove the rest of the mixture and wipe the fur with a damp sponge. Hang the coat on a hanger and let it dry naturally at room temperature.

Moths and kozheedy love fur products that hang in the closet for a long time. To save a fur coat from pests, you can use a perforated cover in which you should store a fur thing. Place a bag of lavender next to it

How to clean a white (light) fur coat?

Light-colored fur can be cleaned with a mixture of refined aviation gasoline and potato starch... As a result, you should get a homogeneous gruel without lumps. Soak a sponge or brush in it and clean the fur, let the mixture dry completely. Then shake the product thoroughly and brush in the direction of hair growth with a stiff brush. There will be no trace of contamination. It is advisable to carry out this cleaning procedure in a well-ventilated place (for example, on a balcony).

What can be made from ceiling tiles: from budget repairs to real creativity

Dobby doll made of polymer clay

Crafts from beer cans Crafts from cans for beginners

Weaving a bracelet from paracord